Webshop support
Call us: +372 5668 1714

Lake LM26




  • Lake LM26 2in / 6out Loudspeaker processor
  • High-performance Lake digital audio loudspeaker processor for unparalleled loudspeaker management and system control
  • Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
  • Configurable Lake groups offers simultaneous non-destructive parameter adjustments across all Lake platforms
  • Redundant audio inputs and on-board system surveillance for full system security
  • Full system control via Lake Controller touch-screen-optimized software application
  • LimiterMax Peak and RMS limiters offer seamless power output control
  • 4 x Lake Mesa modules or 2 x Lake Contour modules for optimized system or loudspeaker control
  • 2 x analog inputs and 6 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR * connectors
  • 4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
  • 2 x Neutrik etherCON * RJ-45 ports provide dual-redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software
  • High quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
  • Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
  • Rugged 1U rackmount chassis for space saving durability in touring applications
  • 100 user presets for simple and efficient system configuration and set-up
  • Backlit, white-on-black front panel daylight readable display
  • Dynamic buttons and rotary encoder for front panel parameter adjustment
  • Software configurable GPIO for 3rd party system control
  • Universal 70 - 265 V power supply served through a locking IEC mains connector
  • Product is on order

1 piece

€3 199,00

Monthly payment from: 91,00 €


Quick start guide : Lake LM26 Quick start guide (.pdf)


2-in/6-out Lake Processor
2 Contour Modules
Raised Cosine Mesa and Ideal graphic input equalizer
Linear phase and classic crossovers and output EQ
LimiterMax peak and RMS limiter
Delay, mute, phase, gain
Audio Performance
Internal sample rate: 96 kHz
A/D and D/A conversion resolution: 24 bit
Internal data path: 32 bit floating point
System propagation delay: < 1.22 ms
Maximum available delay: 2 seconds
Inputs and Outputs 2 inputs, 6 outputs
Dynamic range, inputs 116 dB
Dynamic range, outputs 115 dB
Frequency response, analog to digital +/-0.1 dB, 20 Hz to 20 kHz
Frequency response, digital to analog +/-0.03 dB, 20 Hz to 20 kHz
THD + Noise, inputs 0.00024% at 1 kHz
THD + Noise, outputs 0.00037% at 1 kHz
Iso-Float ground isolation Yes, separate setting for input and output
Input sensitivity settings 12 or 26 dBu
Maximum output level 21 dBu
Input impedance 20 kOhm balanced, 10 kOhm unbalanced
Common mode rejection -74 dB, 20 Hz to 20 kHz
Crosstalk -98 dB, 20 Hz to 20 kHz
Inputs and Outputs 4 inputs, 8 outputs
Supported resolutions Up to 24 bit
Supported sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
Termination Selectable
Dante Audio Network
Inputs and Outputs 4 inputs, 8 outputs
Supported sample rates 48, 96 kHz
Supports redundant paths Yes
Flexible topology Yes
Network latency 0.5, 0.8, 1.3, 4 ms
Front panel user interface
Display Daylight readable monochrome
Meters LED meters and clip indicators per channel
Mute access Mute button and LED indication per channel
LED Fault and Warning indication Yes
Parameter adjustment Rotary encoder
Standby Power button On/Standby
Back panel interface
Analog inputs and outputs 2 + 6 XLR
AES inputs and outputs DB-25
Ethernet Dual Neutrik ® etherCON ®
Power Locking 3-pin IEC
Control and monitoring interface Via Ethernet for Lake Controller software
Gigabit Ethernet 1000 Base-T
Fast Ethernet 100 Base-Tx
Inputs 2 General Purpose Inputs (GPI) supporting external contact closure
Outputs 2 General Purpose Outputs (GPO) with internal contact closure
Software configurable input control Standby state, Mute state, Dual Preset recall
Software configurable output indication Standby state, Mute state, Faults, Ready
Device presets
Frame presets 100
Nominal voltage 100-240 VAC
Operating voltage 70-265 VAC
Power consumption 30 W maximum
Dimensions (W/H/D) W: 483 mm (19”), H: 44 mm (1 U), Overall D: 290 mm (11.5”)
Weight 5 Kg (11 lbs.)
Finish Black painted steel chassis with aluminum handles
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC