EAW UXA4401

Brand:
EAWDescription:
- EAW UXA4401 4-channel amplifier
- 280W 4/8Ohm
- Half rack extension and rear support hardware
- Connection plate for 2x units & desk/wall mounting plate options
- 4 inputs & 4 outputs
- Pairs seamlessly with EAW installation loudspeakers
- Optional Sync Functionality by S/PDIF linking to multiple amps
- Connect wirelessly or direct to the amplifier via a web page interface
- Configurable GPIO for additional control
- Safety and EMC Certified. Compliant to ErP & EnergySTAR
- Product is on order
1 piece
€1 490,00
Monthly payment from: 43,00 €
Downloads:
Specification sheet: EAW UXA4401 specification sheet (.pdf)
Specifications
EAW UXA4401
Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit
EAW MKC 50

Brand:
EAWDescription:
- EAW MKC50 5,25"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is on order
1 piece
€339,00
Price per piece: 339,00 €
Downloads:
Specification sheet: EAW MKC50 specification sheet (.pdf)
Specifications
Model: MKC50
Frequency Response: 80Hz-20kHz
Max SPL: 121dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 150W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 235 x 165 x 141mm
Weight: 3.3kg
EAW MKC 60

Brand:
EAWDescription:
- EAW MKC50 6,5"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is on order
1 piece
€595,00
Monthly payment from: 17,00 €
Downloads:
Specification sheet: EAW MKC60 specification sheet (.pdf)
Specifications
Model: MKC60
Frequency Response: 70Hz-20kHz
Max SPL: 125dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 6,5″ Cone, 1.5″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 250W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 324 x 208 x 206mm
Weight: 4,9kg
EAW MKC 80

Brand:
EAWDescription:
- EAW MKC80 8"+1" installation loudspeaker
- High output, compact coaxial loudspeaker
- Patented CSA coaxial horn provides superior control, fidelity and output
- Integrated handle and pole mount
- Weather protection and transformer options
- Companion UXA4403 amplifiers
- Versatile accessories for a vast range of applications
- Product is on order
1 piece
€890,00
Monthly payment from: 26,00 €
Specifications
Model: MKC80
Frequency Response: 60Hz-20kHz
Max SPL: 132dB
Operating Mode: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:
LF Transducer – 1x8in cone, 2in VC, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominal Beamwidth: 90 x 60 degrees, rotatable
Power Handling: 450W @ 8ohms
Connections: 2x Neutrik NL4, 2-pin barrier strip
Dimensions: 422 x 255 x 267mm
Weight: 10kg
Spec sheet and quick start guide
Specification sheet: EAW MKC80 specification sheet (.pdf)
EAW UX3600

Brand:
EAWDescription:
- EAW UX3600 3in/6out DSP
Built-in System functions include EQ filter, delay, gain, crossovers, and polarity. However, these functions are implemented using custom-designed algorithms to optimize their usefulness when applied to loudspeakers. For example, unlike many bell filter designs, the UX3600’s produce a flat frequency response when reciprocal cut and boost filters are overlaid. Also, to more accurately calculate signal delay distances, a temperature setting permits compensation for sound speed differences.
Loudspeaker preset processing is available for specific EAW loudspeakers and loudspeaker arrays. The UX3600 implement EAW’s innovative Greybox™ settings, including EAW Focusing™, as part of the preset processing to correct loudspeaker anomalies that cannot be corrected with conventional digital processing. Advanced limiting maintains sound quality while achieving maximum output levels based on amplifier outputs. An ambient humidity setting provides appropriate “air loss” equalization based on listening distances.
While the output settings in Greyboxes are locked to deliver optimal loudspeaker performance, the user still retains control of input gain, EQ, signal delay, and polarity for the entire loudspeaker. This mode’s simplicity makes the UX3600 practical for entry level users and fast to operate for experienced users, providing a high degree of system consistency while retaining all necessary, user adjustable, alignment controls.
The UX3600 uses standard USB protocol and cabling for computer control using the custom EAWPilot software. Up to 50 user-defined presets can be save into device non-volatile memory. Two year warranty. - Product is on order
1 piece
€1 690,00
Monthly payment from: 48,00 €
Specifications
- Single operational mode
- Preset EAW Greybox™ signal processing delivers EAW Focusing™ to optimize performance
- Comprehensive, intuitive front panel control makes computer control unnecessary for most adjustments
- 10 parametric EQs per input channel and per output channel
- EAWPilot™ software allows comprehensive computer control
- Filter parameters are compatible with EAW Resolution modeling and alignment software for optimized performance
EAW UX48

Brand:
EAWDescription:
- EAW UX48 minimal signal path design
- 48kHz sampling frequency provides for a nominally flat response beyond 40kHz
- Three rotary encoders, illuminated buttons and graphical display provide a rapid, intuitive and user-friendly control interface
- High speed capable and flexible Ethernet communications that supports DHCP, static-IP and auto-IP and direct connection to a computer without the need for a router or a switch
- Class leading sonic performance achieved by the use of state of the art converters, a 4th Generation Analogue Devices Sharc DSP and highly advanced DSP algorithms
- Powerful Drive Module concept, abstraction from device centric to speaker based control
- Innovative Component Presets to allow individual outputs to be used for selected drivers of a loudspeaker system
- Twelve layers of Parameter Overlays for trouble-free Grouping
- Unique VX limiter providing dynamic control for passive 2-way enclosures
- Unique LIR linear phase crossover shapes giving FIR-like performance without the drawbacks
- Linear phase HF system EQ profiling which provides perfect integration between enclosures
- Innovative excursion control limiter with sliding High Pass Filter; limits only the damaging low frequencies
- Transducer thermal modelling provides regulation limiters, addressing long term overload
- Overshoot limiter governs amplitude of transient signals retaining average power whilst constraining peak energy
- Dante audio networking with automatic fall over to Analogue or AES3
- AES3 inputs and outputs, switchable in pairs
- High performance ‘universal mains’ switch mode power supply, designed in-house
- Greybox TM enabled
- Product is on order
1 piece
€4 190,00
Monthly payment from: 119,00 €
Downloads:
Quick start guide : EAW UX48 spec sheet (.pdf)
Specifications
Output Dynamic Range 118dB (A-weighted)
Frequency Response10Hz - 24kHz
Total Harmonic Distortion (THD)<0.008% (20hz-20kHz)
Inputs:
Analog, +20dBu max @10k Ohm balanced
AES3, 100 Ohm, transformer isolated
Outputs:
+18dBu into 600Ω
<100Ω balanced XLR for analog and AES3
Dante™ Input:
Primary and Secondary RJ45 connectors
4 channel input
EAW RSX89

Brand:
EAWDescription:
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels
- Four pre-defined voicings provide a variety of tonal starting points
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is in stock
1 piece
€1 643,00
Monthly payment from: 47,00 €
Downloads:
Product information : EAW RSX89 Specification (.pdf)
Specifications
Dimensions : 315 x 326 x 498mm
Weight : 15,3kg
Freq response: 68Hz - 18kHz
Dispersion: 90°x60°
Subsystem: 8"+1"
SPL: 124dB (peak)
Power: 1000W Class-D
EAW RSX12M

Brand:
EAWDescription:
- Extremely approachable EAWmosaic™ iOS app
- Proven EAW acoustical design and DSP including Focusing™ and DynO™
- Four pre-defined voicings
- Integrated Dante™ networking
- Low latency of just 2,6ms provides excellent transparency for vocal monitoring
- Product is in stock
1 piece
€2 090,00
Monthly payment from: 60,00 €
Downloads:
Product information : EAW RSX12M Specification (.pdf)
Specifications
Dimensions : 333 x 501 x 489mm
Weight : 16,3kg
Freq response: 55Hz - 18kHz
Dispersion: 105°x105°
Subsystem: 12"+1"
SPL: 128dB (peak)
Power: 1000W Class-D
EAW RSX12

Brand:
EAWDescription:
- Compact, flyable design ideal for installs with floor space constraints or specific aesthetic demands
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is on order
1 piece
€2 115,00
Monthly payment from: 60,00 €
Downloads:
Product information : EAW RSX12 Specification (.pdf)
Specifications
Dimensions : 437 x 640 x 595mm
Weight : 34,5kg
Freq response: 40Hz - 140Hz
Beamwidth: 360°(H) 360°(V)
Subsystem: 1x12"
SPL: 134dB (peak, half space)
Power: 1000W Class-D
EAW RSX129

Brand:
EAWDescription:
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels
- Four pre-defined voicings provide a variety of tonal starting points
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is in stock
1 piece
€2 125,00
Monthly payment from: 61,00 €
Downloads:
Product information : EAW RSX129 Specification (.pdf)
Specifications
Dimensions : 414 x 419 x 683mm
Weight : 26,3kg
Freq response: 59Hz - 20kHz
Dispersion: 90°x60°
Subsystem: 12"+1"
SPL: 136dB (peak)
Power: 1000W Class-D
EAW RSX18F

Brand:
EAWDescription:
- Compact, flyable design ideal for installs with floor space constraints or specific aesthetic demands
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is on order
1 piece
€2 930,00
Monthly payment from: 83,00 €
Downloads:
Product information : EAW RSX18F Specification (.pdf)
Specifications
Dimensions : 521,2 x 812,8 x 691,6mm
Weight : 48kg
Freq response: 27Hz - 125Hz
Nominal beamwidth: 360°(V) 360°(H)
Subsystem: 1x18"
SPL: 135dB (peak, half space)
Power: 1000W Class-D (LF)
EAW RSX218

Brand:
EAWDescription:
- Push-button cardioid operation provides directivity to lower excess low-frequency energy on stage
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability.
- Product is on order
1 piece
€3 290,00
Monthly payment from: 94,00 €
Downloads:
Product information : EAW RSX218 Specification (.pdf)
Specifications
Dimensions : 523 x 1118 x 791mm
Weight : 69,4kg
Freq response: 27Hz - 125Hz
Nominal beamwidth: 360°(V) 360°(H)
Subsystem: 2x18"
SPL: 141dB (peak, half space)
Power: 1400W Class-D
EAW RSX212L

Brand:
EAWDescription:
- OptiLogic™ provides array self-detection via onboard infrared sensors and accelerometers for near-instant optimization that cuts down on setup and tuning time
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is on order
1 piece
€4 980,00
Monthly payment from: 141,00 €
Downloads:
Product information : EAW RSX212L Specification (.pdf)
Specifications
Dimensions : 355,6 x 812 x 517,7mm
Weight : 37kg
Freq response: 50Hz - 19kHz
Dispersion: 90°x12°
Subsystem: 2x12"+2x1"
SPL: 142dB (peak)
Power: 1000W+500W Class-D (LF+HF)
EAW RSX208L

Brand:
EAWDescription:
- OptiLogic™ provides array self-detection via onboard infrared sensors and accelerometers for near-instant optimization that cuts down on setup and tuning time
- Extremely approachable EAWmosaic™ iOS app delivers system prediction, control and monitoring from any location in the venue
- Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.
- Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability
- Product is on order
1 piece
€3 890,00
Monthly payment from: 111,00 €
Downloads:
Product information : EAW RSX208L Specification (.pdf)
Specifications
Dimensions : 249 x 683 x 332mm
Weight : 18,4kg
Freq response: 70Hz - 18kHz
Dispersion: 120°x12°
Subsystem: 1x8"+1x8"+2x1"
SPL: 128dB (peak)
Power: 3x500W Class-D (LF/MF/HF)
EAW RS121

Brand:
EAWDescription:
- 1500 watts of Class-D Amplification
- Leading-edge touring grade transducers
- EAW Focusing™ for unmatched clarity & accuracy
- Rotatable MK inspired horn for EAW signature pattern control
- Lightweight & durable wooden enclosure with
- Product is in stock
1 piece
€1 080,00
Monthly payment from: 31,00 €
Downloads:
Product information : EAW RS Specification (.pdf)
Specifications
Dimensions : 368 x 381 x 658mm
Weight : 19kg
Freq response: 47Hz - 20kHz
Dispersion: 90°x60°
Subsystem: 1x12"+1"
SPL: 135dB (peak)
Power: 1500W Class-D
EAW RS123

Brand:
EAWDescription:
- 1500 watts of Class-D Amplification
- Leading-edge touring grade transducers
- EAW Focusing™ for unmatched clarity & accuracy
- Rotatable MK inspired horn for EAW signature pattern control
- Lightweight & durable wooden enclosure with
- Product is in stock
1 piece
€1 408,00
Monthly payment from: 40,00 €
Downloads:
Product information : EAW RS Specification (.pdf)
Specifications
Dimensions : 368 x 381 x 658mm
Weight : 19kg
Freq response: 47Hz - 20kHz
Dispersion: 90°x60°
Subsystem: 1x12"+1,4"
SPL: 138dB (peak)
Power: 1500W Class-D
EAW RS151

Brand:
EAWDescription:
- 1500 watts of Class-D Amplification
- Leading-edge touring grade transducers
- EAW Focusing™ for unmatched clarity & accuracy
- Rotatable MK inspired horn for EAW signature pattern control
- Lightweight & durable wooden enclosure with
- Product is in stock
1 piece
€1 217,00
Monthly payment from: 35,00 €
Downloads:
Product information : EAW RS Specification (.pdf)
Specifications
Dimensions : 409 x 439 x 734mm
Weight : 25kg
Freq response: 43Hz - 20kHz
Dispersion: 90x60
Subsystem: 1x15"+1"
SPL: 136dB (peak)
Power: 1500W Class-D
EAW RS153

Brand:
EAWDescription:
- 1500 watts of Class-D Amplification
- Leading-edge touring grade transducers
- EAW Focusing™ for unmatched clarity & accuracy
- Rotatable MK inspired horn for EAW signature pattern control
- Lightweight & durable wooden enclosure with
- Product is in stock
1 piece
€1 549,00
Monthly payment from: 44,00 €
Downloads:
Product information : EAW RS Specification (.pdf)
Specifications
Dimensions : 409 x 439 x 734mm
Weight : 25kg
Freq response: 43Hz - 20kHz
Subsystem: 1x15"+1,4"
SPL: 138dB (peak)
Power: 1500W Class-D
EAW RS115

Brand:
EAWDescription:
- 1500 watts of Class-D Amplification
- Premium transducers and signature EAW DynO™ dynamic optimization processing
- Dual tunings for application specific performance
- Ergonomic handles, rugged grille, RoadCoat enclosure, pole cup, and optional casters
- Product is in stock
1 piece
€1 349,00
Monthly payment from: 39,00 €
Downloads:
Product information : EAW RS SUB Specification (.pdf)
Specifications
Dimensions : 450 x 630 x 599mm
Weight : 32kg
Freq response: 40Hz - 125Hz
Subsystem: 1x15"
SPL: 132dB (peak, half space)
Power: 1500W Class-D
EAW RS118

Brand:
EAWDescription:
- EAW RS118 single 18" active subwoofer
- 1500 watts of Class-D Amplification
- Premium transducers and signature EAW DynO™ dynamic optimization processing
- Dual tunings for application specific performance
- Ergonomic handles, rugged grille, RoadCoat enclosure, pole cup, and optional casters
- Product is in stock
1 piece
€1 525,00
Monthly payment from: 44,00 €
Downloads:
Product information : EAW RS SUB Specification (.pdf)
Specifications
Dimensions : 521 x 762 x 681mm
Weight : 40kg
Freq response: 27Hz - 125Hz
Subsystem: 1x18"
SPL: 133dB (peak, half space)
Power: 1500W Class-D
EAW RL18S demo

Brand:
EAWDescription:
- EAW Redline RL18S active subwoofer
- Custom-designed transducers and porting, signature EAW Focusing™ and DynO™ dynamic optimization processing
- 1,000 watts of Class-D Power Factor Corrected amplification
- Cardioid pattern can be generated in seconds with two button presses
- LED mute function, robust PowerCON® inlet and loop connectors
- Integral wooden handles, rugged grille and RoadCoat™ enclosure, pole cup, hyper-black front EAW logo
- Product is in stock
1 piece
€2 290,00
Monthly payment from: 65,00 €
Downloads:
Product information : EAW RL18S Specification (.pdf)
Specifications
Dimensions : 631 x 883,2 x 501,6mm
Weight : 37kg
Freq response: 28Hz - 160Hz
VLF: 1x18"
SPL: 133dB (peak, half space)
Power: 1000W Class-D
DSP: yes