EAW UXA4401
Brand:
EAWDescription:
- EAW UXA4401 4-channel amplifier
- 280W 4/8Ohm
- Half rack extension and rear support hardware
- Connection plate for 2x units & desk/wall mounting plate options
- 4 inputs & 4 outputs
- Pairs seamlessly with EAW installation loudspeakers
- Optional Sync Functionality by S/PDIF linking to multiple amps
- Connect wirelessly or direct to the amplifier via a web page interface
- Configurable GPIO for additional control
- Safety and EMC Certified. Compliant to ErP & EnergySTAR
- Product is on order
1 piece
€1 490,00
Monthly payment from: 43,00 €
Downloads:
Specification sheet: EAW UXA4401 specification sheet (.pdf)
Specifications
EAW UXA4401
Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit
EAW MKC 50
Brand:
EAWDescription:
- EAW MKC50 5,25"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is on order
1 piece
€339,00
Price per piece: 339,00 €
Downloads:
Specification sheet: EAW MKC50 specification sheet (.pdf)
Specifications
Model: MKC50
Frequency Response: 80Hz-20kHz
Max SPL: 121dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 150W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 235 x 165 x 141mm
Weight: 3.3kg
EAW MKC 60
Brand:
EAWDescription:
- EAW MKC50 6,5"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is on order
1 piece
€595,00
Monthly payment from: 17,00 €
Downloads:
Specification sheet: EAW MKC60 specification sheet (.pdf)
Specifications
Model: MKC60
Frequency Response: 70Hz-20kHz
Max SPL: 125dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 6,5″ Cone, 1.5″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 250W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 324 x 208 x 206mm
Weight: 4,9kg
EAW MKC 80
Brand:
EAWDescription:
- EAW MKC80 8"+1" installation loudspeaker
- High output, compact coaxial loudspeaker
- Patented CSA coaxial horn provides superior control, fidelity and output
- Integrated handle and pole mount
- Weather protection and transformer options
- Companion UXA4403 amplifiers
- Versatile accessories for a vast range of applications
- Product is on order
1 piece
€890,00
Monthly payment from: 26,00 €
Specifications
Model: MKC80
Frequency Response: 60Hz-20kHz
Max SPL: 132dB
Operating Mode: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:
LF Transducer – 1x8in cone, 2in VC, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominal Beamwidth: 90 x 60 degrees, rotatable
Power Handling: 450W @ 8ohms
Connections: 2x Neutrik NL4, 2-pin barrier strip
Dimensions: 422 x 255 x 267mm
Weight: 10kg
Spec sheet and quick start guide
Specification sheet: EAW MKC80 specification sheet (.pdf)
Behringer RX1602 V2
Brand:
BehringerDescription:
- Behringer RX1602 V2 Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
- 16 balanced high-headroom line inputs for individual stereo or mono use of each section
- Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
- Dedicated balance and level controls plus +4/-10 level selection per channel
- Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
- Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
- Monitor/FX signal assignable to phones output for added flexibility
- Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
- 1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
- High-quality detented rotary controls for long-term reliability
- Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
- Product is in stock
1 piece
€138,00
Price per piece: 138,00 €
Downloads:
Quick start guide : Behringer RX1602 V2 Quick start guide (.pdf)
Specifications
Dimensions : 44 x 483 x 149 mm
Weight : 1,8kg
Klark Teknik DM TCE-EU
Klark Teknik DM TCE-EU
1 piece
€245,00
1 piece
€245,00
Klark Teknik DM TCE-EU
Brand:
Klark TeknikDescription:
- Klark Teknik DM TCE-EU 2.3" colour touch screen controller
- User programmable encoder and button
- POE powered device
- Support for multiple pages and controls from DM series devices
- Single gang EU size
- Black and white single gang trim plates and encoder knobs included
- Programmable using DM KONTROL application
- Product is on order
1 piece
€245,00
Price per piece: 245,00 €
Downloads:
Quick start guide : Klark Teknik DM TCE-EU Quick start guide (.pdf)
Specifications
Dimensions : 86,36 x 86,36 x 53,75mm
Weight : 0,16kg
Klark Teknik CP8000EU
Brand:
Klark TeknikDescription:
- Klark Teknik CP8000EU Wall plate remote control for DM8000
- Volume control may be assigned to either auxiliary input section or main mix bus
- Selection of auxiliary inputs 1-6
- All Illuminated, soft touch controls powered remotely from DM8000
- Use CAT5/6 or any 5 conductor cable for connection distances up to 300 feet (100 m)
- Compact, single gang format allows use with low voltage trim rings and most standard depth enclosures
- Generous space provided for input labeling
- Discrete appearance matches any decor
- Product is on order
1 piece
€56,00
Price per piece: 56,00 €
Downloads:
Quick start guide : Klark Teknik CP8000EU Quick start guide (.pdf)
Specifications
Dimensions : 80 x 80 x 36mm
Weight : 0,07kg
Midas Heritage-D HD96-24 IP
Midas Heritage-D HD96-24 IP
1 piece
€37 500,00
1 piece
€37 500,00
Midas Heritage-D HD96-24 IP
Brand:
MidasDescription:
- Midas Heritage-D HD-96-IP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
- 120 time-aligned and phase-coherent mix buses
- 21" full colour TFT display screen with capacitive touch sensing
- Advanced and multi-gesture touchscreen user interface
- Award-winning Midas microphone preamplifiers
- HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
- Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
- 24 VCA (variable control association) groups, and unlimited POPulation groups
- Up to 24 multi-channel digital signal processing effects engines
- Integrated Wireless transceiver module
- Dual ULTRANET Ports providing 32 additional digital outputs
- 28 Midas PRO motorised 100 mm faders
- Fully interpolated touch sensitive controls
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€37 500,00
Monthly payment from: 1 061,00 €
Downloads:
Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)
Specifications
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg
Klark Teknik DF1000
Brand:
Klark TeknikDescription:
- Klark Teknik DF1000 Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
- Offers up to 10 dB increase in system gain
- Instantly detects and stops acoustic feedback. Highly effective with both speech and music
- Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
- Two fully independent audio channels to process stereo or separate zone signals
- Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
- Front panel control featuring suppression and filter reset buttons
- Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
- Auto-ranging universal switch-mode power supply
- Product is on order
1 piece
€205,00
Price per piece: 205,00 €
Downloads:
Quick start guide : Klark Teknik DF1000 Quick start guide (.pdf)
Specifications
Dimension : 483 x 296 x 50 mm
Weight : 2,9kg
Klark Teknik DM8500
Klark Teknik DM8500
1 piece
€2 229,00
1 piece
€2 229,00
Klark Teknik DM8500
Brand:
Klark TeknikDescription:
- Klark Teknik DM8500 Networked open architecture digital audio processor
- 64 x 64 channel, dual-redundant Dante*/AES67 audio transport
- 10 high-headroom analogue mic/line inputs
- 6 electronically balanced, low impedance line level outputs
- 24 channels of freely assignable Acoustic Echo Cancellation
- 16 channel ULTRANET audio output bus
- Class-compliant USB connection for integration with soft codec conferencing applications
- System configuration and control via ethernet
- Embedded HTML engine to serve custom control pages
- Integrated control modules for Lab Gruppen D series and Lucia amplifiers
- Embedded media engine for audio playback and recording
- RS232 connector for interfacing with 3rd party control systems
- 6 user-configurable general purpose input output connections (GPIO)
- Auto-ranging universal power supply
- Product is on order
1 piece
€2 229,00
Monthly payment from: 64,00 €
Downloads:
Quick start guide : Klark Teknik DM8500 Quick start guide (.pdf)
Specifications
Dimensions : 483 x 293 x 44mm
Weight : 3,6 kg
Lab gruppen FAD602
Brand:
Lab gruppenDescription:
- Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€435,00
Price per piece: 435,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD1202
Brand:
Lab gruppenDescription:
- Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€485,00
Price per piece: 485,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD2402
Lab gruppen FAD2402
1 piece
€532,00
1 piece
€532,00
Lab gruppen FAD2402
Brand:
Lab gruppenDescription:
- Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€532,00
Monthly payment from: 16,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen CMA1201
Brand:
Lab gruppenDescription:
- Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
- 4 mic/line inputs with individual volume controls
- Energy efficient design conserves energy and reduces
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Aux output for expansion to additional amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82
Brand:
Lab gruppenDescription:
- Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
- 8 mic/line inputs with individual volume controls and output routing
- Individual front panel master volume and bass/treble controls for each output
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 437 x 248 x 44mm
Weight : 2,4kg
Lab gruppen CM41
Brand:
Lab gruppenDescription:
- Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
- 4 mic/line inputs with individual volume controls
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€272,00
Price per piece: 272,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 299 x 218 x 44mm
Weight : 2,1kg
Lab gruppen E 12:2
Lab gruppen E 12:2
1 piece
€1 479,00
1 piece
€1 479,00
Lab gruppen E 12:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 479,00
Monthly payment from: 42,00 €
Downloads:
Spec sheet : Lab gruppen E 12:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W
Lab gruppen E 40:4
Lab gruppen E 40:4
1 piece
€2 790,00
1 piece
€2 790,00
Lab gruppen E 40:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
4 x 1,000 Watts into Hi-Z 100 V - Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 790,00
Monthly payment from: 79,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 20:4
Lab gruppen E 20:4
1 piece
€2 649,00
1 piece
€2 649,00
Lab gruppen E 20:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 649,00
Monthly payment from: 75,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 10:4
Lab gruppen E 10:4
1 piece
€2 090,00
1 piece
€2 090,00
Lab gruppen E 10:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 090,00
Monthly payment from: 60,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg
*See spec sheet for details
Lab gruppen E 5:4
Lab gruppen E 5:4
1 piece
€1 890,00
1 piece
€1 890,00
Lab gruppen E 5:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 890,00
Monthly payment from: 54,00 €
Downloads:
Spec sheet : Lab gruppen E 5:4 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg
Lab gruppen E 2:2
Brand:
Lab gruppenDescription:
- Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€899,00
Monthly payment from: 26,00 €
Downloads:
Spec sheet : Lab gruppen E 2:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 8:2
Lab gruppen E 8:2
1 piece
€1 379,00
1 piece
€1 379,00
Lab gruppen E 8:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 379,00
Monthly payment from: 40,00 €
Downloads:
Spec sheet : Lab gruppen E 8:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 4:2
Lab gruppen E 4:2
1 piece
€1 090,00
1 piece
€1 090,00
Lab gruppen E 4:2
Brand:
Lab gruppenDescription:
- Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Spec sheet : Lab gruppen E 4:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Behringer RX1202FX
Brand:
BehringerDescription:
- Behringer RX1202FX Premium ultra-low noise, high headroom analog 3U rack mount mixer
- 8 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
- Neo-classic "British" 2-band EQs for warm and musical sound
- Studio-grade FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- Switchable +48 V phantom power for condenser microphones
- 4 additional balanced high-headroom line inputs
- CD/Tape inputs assignable to Main mix or Control Room/Phones outputs
- 2 Aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as external send
- Separate Control Room, Phones and stereo CD/tape outputs
- Balanced Main mix outputs with gold-plated XLR connectors
- Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- Product is in stock
1 piece
€210,00
Price per piece: 210,00 €
Downloads:
Product information : Behringer RX1202FX Product information (.pdf)
Manual : Behringer RX1202FX manual (.pdf)
Specifications
Dimensions : 482 x 133 x 150 mm
Weight : 3,04kg
Behringer CE500D
Brand:
BehringerDescription:
- Behringer CE500D Multi-purpose, 100-Watt, active speaker for commercial sound applications
- Perfect for restaurants, shops, exhibitions, multimedia, home recording and A/V production
- Exceptional sound quality, wide dynamic range and ultra-linear frequency range
- Revolutionary Class-D amplifier technology: enormous power and incredible sonic performance
- Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
- Ultra-low noise mic/line input with volume control and peak LED
- Additional line output connector allows linking of additional speaker systems
- Integrated limiter for ultimate system control and speaker protection
- Ultra-flexible and heavy-duty wall-mount bracket included
- Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
- Product is in stock
1 piece
€173,00
Price per piece: 173,00 €
Downloads:
Product information : Behringer CE500D Product information (.pdf)
Quick start guide : Behringer CE500D Quick start guide (.pdf)
Specifications
Dimensions : 320 x 196 x 195mm
Weight : 4,0kg
K&M 24110
Brand:
K&MDescription:
- Screw-on wall mount with innovative, patented straddlingbearing-anchors.
- Suitable for speakers with connectordiameter of 35/37 mm.
- This mount provides simpleattachment and guaranteed effective clamping of speaker
- Product is in stock
1 piece
€74,00
Price per piece: 74,00 €
Specifications
Adjustment: gradual in 11 settings
Angle of inclination: 0° to 22°
Material: steel
Max. load capacity: 50 kg
Mounting: attaches to walls
Mounting bolt: straddling bearing-anchors diameter 35 to 37 mm x 85 mm
Special features: patented straddling bearing-anchors; guarantee effective clamping of speaker in any position; resonance-optimised construction
Type: black
Wall-to-bolt clearance: 420 mm
Weight: 2.63 kg