Brand:

Description:

• Midas DN4816-I Bus-Powered StageCONNECT Interface with 16 Analog Inputs and Dual Ultranet Outputs
• Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
• Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
• StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
• Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
• Flexible connectivity on stage and between side racks using any balanced microphone cable
• Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
• Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
• Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
• Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
• External power supply for standalone use and offering remote power on the StageConnect Master output
• Product is available for preorder

Brand:

Description:

• Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
• Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
• StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
• Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
• Flexible connectivity on stage and between side racks using any balanced microphone cable
• Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
• Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
• Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
• Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
• External power supply for standalone use and offering remote power on the StageConnect Master output

Brand:

Description:

• KLARK TEKNIK DN4816U Bus-Powered StageCONNECT Interface Bridge with Multi-Channel USB I/O and Behringer Ultranet I/O
• DI Box sized interface for connecting StageConnect devices to Behringer Ultranet systems and USB multi-channel audio
• StageConnect 32-channel audio transmission at sub-milisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz, using standard XLR microphone or DMX cable
• Asynchronous 32-channel sample rate conversion allows connecting different clock domains and sample rates with 0.4 ms latency and 140 dB dynamic range
• Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
• Master and Slave ports allow exchanging multi-channel audio with a chain of other StageConnect devices
• Can be used for sending StageConnect or USB signals to P16 personal monitoring mixers or Turbosound iQ speakers  Behringer Ultranet signals can be converted to StageConnect or USB streams
• Slave mode for use with StageConnect enabled mixing consoles, stageboxes and hubs
• External power supply for stand-alone use and offering remote power on the StageConnect Master output
• Product is available for preorder

Brand:

Description:

• Midas DN4888 Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
• Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
• StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
• Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
• Flexible connectivity on stage and between side racks using any balanced microphone cable
• Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
• Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
• Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
• Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
• External power supply for standalone use and offering remote power on the StageConnect Master output
• Product is available for preorder

Brand:

Description:

• Klark Teknik DM TCE-EU 2.3" colour touch screen controller
• User programmable encoder and button
• POE powered device
• Support for multiple pages and controls from DM series devices
• Single gang EU size
• Black and white single gang trim plates and encoder knobs included
• Programmable using DM KONTROL application
• Product is on order

Brand:

Description:

• Klark Teknik CP8000EU Wall plate remote control for DM8000
• Volume control may be assigned to either auxiliary input section or main mix bus
• Selection of auxiliary inputs 1-6
• All Illuminated, soft touch controls powered remotely from DM8000
• Use CAT5/6 or any 5 conductor cable for connection distances up to 300 feet (100 m)
• Compact, single gang format allows use with low voltage trim rings and most standard depth enclosures
• Generous space provided for input labeling
• Discrete appearance matches any decor
• Product is on order

Brand:

Description:

• Klark Teknik DF1000 Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
• Offers up to 10 dB increase in system gain
• Instantly detects and stops acoustic feedback. Highly effective with both speech and music
• Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
• Two fully independent audio channels to process stereo or separate zone signals
• Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
• Front panel control featuring suppression and filter reset buttons
• Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
• Auto-ranging universal switch-mode power supply
• Product is on order

Brand:

Description:

• Klark Teknik KT-DANTE Audinate Dante* network module for Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
• Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
• Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac* computer)
• Primary and secondary Ethernet interfaces for dual-redundant Dante networking
• Operates from internal Dante network Precision Time Protocol (PTP) clock or external clock via host unit
• Optional Dante Controller software for remote configuration (PC or Mac computer)
• LED indicators monitor network activity and speed
• Product is on order

Brand:

Description:

• Klark Teknik KT-MADI MADI (AES10-compliant) network module with up to 64 bidirectional channels @ 48 kHz and 32 bidirectional channels @ 96 kHz
• Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
• Operates up to 500 m over optical fibre link and 200 m over coaxial copper link
• Optical transmission on SC-Duplex* connector
• Copper transmission on 75 ohm coaxial BNC connectors
• Dual-redundant operation with failover from optical to copper connections
• Operates as either MADI clock master, MADI clock slave or from external clock via host unit
• Product is on order

Brand:

Description:

• Klark Teknik KT-USB USB 2.0 network module with up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz
• Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
• Simultaneous computer audio recording and playback
• LED indication of sample rate
• Windows* software driver available at klarkteknik.com
• Product is on order

Brand:

Description:

• Klark Teknik DM8500 Networked open architecture digital audio processor
• 64 x 64 channel, dual-redundant Dante*/AES67 audio transport
• 10 high-headroom analogue mic/line inputs
• 6 electronically balanced, low impedance line level outputs
• 24 channels of freely assignable Acoustic Echo Cancellation
• 16 channel ULTRANET audio output bus
• Class-compliant USB connection for integration with soft codec conferencing applications
• System configuration and control via ethernet
• Embedded HTML engine to serve custom control pages
• Integrated control modules for Lab Gruppen D series and Lucia amplifiers
• Embedded media engine for audio playback and recording
• RS232 connector for interfacing with 3rd party control systems
• 6 user-configurable general purpose input output connections (GPIO)
• Auto-ranging universal power supply
• Product is on order

Brand:

Description:

• Klark Teknik DN9652 Dual network bridge format converter with up to 64 bidirectional channels
• Compatible with Klark Teknik KT-AES50, KT-DANTE64, KT-MADI and KT-USB network modules
• Bidirectional Asynchronous Sample Rate Conversion on every channel with bypass facility
• Bidirectional output audio clock inhibit feature for redundant network systems
• 24 bit audio operation with 96 kHz and 48 kHz sample rates
• Video synchronisation in standard and high definition formats
• Internal "AES Grade 1" temperature-compensated word clock (1 ppm)
• Internal web server allows browser-based configuration via Ethernet control port
• Status indicator LEDs and LCD display on front panel
• Features Neutrik etherCON* network ports
• Rugged 1U rackmount chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
• Product is on order

Brand:

Description:

• Klark Teknik DN9650 Network bridge format converter for AES50 networks with up to 64 bidirectional channels
• Compatible with Klark Teknik KT-AES50, KT-DANTE64, KT-MADI and KT-USB network modules
• Asynchronous sample rate conversion on every channel with bypass facility
• Bidirectional output audio clock inhibit feature for redundant network systems
• 24 bit audio operation with 96 kHz and 48 kHz sample rates
• Video synchronisation in standard and high definition formats
• Internal "AES Grade 1" temperature-compensated word clock (1 ppm)
• Internal web server allows browser-based configuration via Ethernet control port
• Status indicator LEDs and LCD display on front panel
• Features Neutrik etherCON* network ports
• Rugged 1U rackmount chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
• Product is on order

Brand:

Description:

• Klark Teknik DS20 Line level splitter sends single input signal to 2 outputs
• Custom-built Midas transformer for highest signal integrity
• High headroom design offers superior sound quality
• Passive design does not require any power supply
• High quality Neutrik* XLR connectors
• Earth Lift switches for each output eliminates ground loop problems
• Fully transformer-isolated design ensures electrical separation
• Ultra-low noise and ultra-linear system for highest signal integrity
• Aluminium extrusion casing with protective rubber corners
• Compact and rugged design
• Product is in stock

Brand:

Description:

• Behringer WING-DANTE 64-channel 48 kHz, bi-directional audio interface for Dante* IP networks
• Low-latency 24-bit signal transmission with sample-accurate synchronization
• Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
• Mixed sample and bit rates can coexist on the same Dante network
• WING remote control possible on the same network, using the integrated Ethernet switch
• Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
• Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at (www.audinate.com)
• Secondary connection can be configured for seamless redundant audio networking
  
  
• Product is on order

Brand:

Description:

• Klark Teknik DN200V2 2-Channel Active DI box with high-headroom design and +48 V phantom power for extended dynamic range
• Sum and split options for flexible signal routing
• Fully transformer-isolated design ensures electrical separation between PA and stage equipment
• Balanced line inputs on Neutrik Combo* XLR and high impedance 1/4" TRS connectors
• Stereo input on 1/8" TRS for connection of consumer audio equipment
• Independent phantom powering for each channel for maximum reliability
• Global 20 dB input pad and earth lift switches
• Aluminium extrusion casing with protective rubber corners
• Compact and rugged design
  
  
• Product is in stock

Brand:

Description:

• Klark Teknik DS50 line level splitter sends single input signal to 5 outputs
• High headroom design offers superior sound quality
• Passive design does not require any power supply
• High quality Neutrik* XLR connectors
• Ultra-low noise and ultra-linear system for highest signal integrity
• Aluminium extrusion casing with protective rubber corners
• Compact and rugged design
• Product is in stock

Brand:

Description:

• Klark Teknik Stereo DW 20R stereo receiver to wirelessly stream audio (together with separate DW 20T)
• Perfect for hospitality and event spaces, retail and home audio, etc.
• Apply multiple DW 20R units for larger coverage
• Digital 2.4 GHz wireless connectivity offers superior sound quality
• High headroom design offers superior sound quality
• Maximum wireless range 100 feet (30 m)
• External, articulating antenna ensures optimum transmission and reception
• Aluminium extrusion casing with protective rubber corners
• Floor and wall mount brackets for fixed installation (included)
• High quality Neutrik* XLR and 1/4" TRS connectors
• 2.4 GHz ISM band operation allows license-free use on a worldwide basis
• Compact and rugged design
  
  
• Product is on order

Brand:

Description:

• Klark Teknik DW 20T stereo transmitter to wirelessly stream audio (together with separate DW 20R)
• Perfect for hospitality and event spaces, retail and home audio, etc.
• Able to broadcast to multiple receivers (not included)
• Digital 2.4 GHz wireless connectivity offers superior sound quality
• High headroom design offers superior sound quality
• Maximum wireless range 100 feet (30 m)
• External, articulating antenna ensures optimum transmission and reception
• Aluminium extrusion casing with protective rubber corners
• Floor and wall mount brackets for fixed installation (included)
• High quality Neutrik* XLR and 1/4" TRS connectors
• 2.4 GHz ISM band operation allows license-free use on a worldwide basis
• Compact and rugged design
• Product is on order

Brand:

Description:

• Stereo receiver to wirelessly stream Bluetooth* to any audio system
• Perfect for hospitality and event spaces, retail and home audio, etc.
• High headroom design offers superior sound quality
• Maximum wireless range 100 feet (30 m)
• External, articulating antenna ensures optimum transmission and reception
• Aluminium extrusion casing with protective rubber corners
• Floor and wall mount brackets for fixed installation (included)
• High quality Neutrik* XLR and 1/4” TRS connectors
• Compact and rugged design
• Power adapter 12V DC
• Product is in stock

Brand:

Description:

• 2-Channel audio transmitter for connecting mic/instrument and line level sources to Dante*-networks
• Automatically reconnects with any configured Dante receiver such as Klark Teknik DN 30R
• Plug'n'play experience in networked audio
• Perfect for hospitality and event spaces, performance and installed audio, etc.
• 96 kHz A/D conversion and high headroom design offers superior sound quality
• Aluminium extrusion casing with protective rubber corners
• Floor and wall mount brackets for fixed installation (included)
• Quality connectors for reliability
• Compact and rugged design
• Product is in stock

Brand:

Description:

• 2-Channel audio receiver for connecting active loudspeakers, amplifiers or mixers to Dante*-networks
• Automatically reconnects with any configured Dante transmitter such as Klark Teknik DN 30T
• Plug'n'play experience in networked audio
• Perfect for hospitality and event spaces, performance and installed audio, etc.
• 96 kHz D/A conversion and high headroom design offers superior sound quality
• Built-in headphone amplifier for local monitoring
• Aluminium extrusion casing with protective rubber corners
• Floor and wall mount brackets for fixed installation (included)
• Quality Neutrik* XLR connectors for highest reliability
• Compact and rugged design
• Product is in stock

Brand:

Description:

• Classic FET-style compressor modeled after iconic 1176LN*, D and E Revisions
• Completely discrete signal path
• Class-A line-level output amplifier
• Custom-built, Midas input and output transformers
• Push button selection of compression ratios: 4:1, 8:1, 12:1, 20:1
• Ultra-fast attack time: 20 to 800 microseconds
• Adjustable release time: 80 to 700 milliseconds
• Vintage-style meter features gain reduction and output
• Transformer balanced inputs and outputs on Neutrik* XLR connectors
• Rugged 2U rackmount chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
• Product is on order

Brand:

Description:

• Pair of DN9620 Dual Port AES50 Extenders and 19” rackmount adapter bracket
• Extends two AES50 connections by 500 m with optical fibre or 100 m with Cat5 cable
• High channel capacity - 48 channels @ 96 kHz or 96 channels @ 48 kHz bidirectional operation
• Neutrik etherCON* connectors used for AES50 ports and copper snake connection
• Dual-fibre Neutrik opticalCON DUO* connector used for optical fibre snake connection
• Comprehensive clock source options with front panel push button selection and LED indication
• Status indicator LEDs on front panel for each AES50 port and optical and copper snake connections
• Rugged half-width 1U rackmount chassis for durability in portable applications
• Auto-ranging universal switch-mode power supply
• Product is on order

Brand:

Description:

• Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
• Length 50 metres
• Tested for both AES50 and EtherSound* audio networking
• Dual shielding for protection against EMI and ESD interference
• Dual jacket construction with PUR and FRNC layers for enhanced cable resilience
• Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
• Robust and lightweight Schill* cable drum, with auxiliary winder and integrated break
• Extend two 50 m cables to 100 m using optional Neutrik NE8FF connector (not included)
• Rubber caps on etherCON connectors cover terminals during setup and transport
• Velcro* straps secure cable ends during transportation
• Designed and engineered in the U.K.
• Product is in stock

Brand:

Description:

• Extends two independent AES50 connections by up to 100 m with CAT5 cable
• High channel capacity - 48 channels @ 96 kHz or 96 channels @ 48 kHz bidirectional operation
• Supports dual-redundant AES50 networks (X and Y connections)
• Rugged locking Neutrik* etherCON connectors used for AES50 connections
• Status indicator LEDs on front panel for each AES50 port
• Dual-redundant power supply inputs with locking Switchcraft* connectors
• External auto-ranging universal switch-mode power supply adapter
• Aluminium extrusion casing with stackable protective silicone rubber sleeve
• Compact and rugged design
• Product availability: Special order
  

Brand:

Description:

• Audinate Dante* expansion module for Midas and Behringer digital consoles
• Up to 32 bidirectional channels @ 48 kHz
• Enables multichannel recording and playback via Dante Virtual Soundcard* (PC or Mac* computer)
• Primary and secondary Ethernet interfaces for dual-redundant Dante networking
• Operates from internal Dante network Precision Time Protocol (PTP) clock
• Optional Dante Controller software for remote configuration (PC or Mac* computer)
• LED indicators monitor network activity and speed
• Product is on order

Brand:

Description:

• AES50 to USB 2.0 converter for simultaneous computer audio recording and playback
• Up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz
• Switchable 48 kHz and 96 kHz sample rate operation
• Operates from incoming AES50 clock
• Powered via USB 2.0 interface
• Native Core Audio* driver support in Mac OS X*, software drivers available for Windows* PC
• LED indicators monitor network activity and speed
• Compact and rugged design with durable aluminium extrusion casing
• Product is in stock

Brand:

Description:

• WAVES SoundGrid network interface for Behringer X32 and Midas M32 mixing consoles
• Mix, record and play back with SoundGrid-plugins in extremely low latency
• 32 input and output channels of audio over IP networks
• 44.1 and 48 kHz sample rates, 24-Bit resolution
• Clock Sync-over-Ethernet (SoE) for digital splits and distributed audio processing
• Redundancy and recovery options in networked audio
• Connects your console to the plugin processing power of WAVES SoundGrid servers
• Compatible with standard computers and network switches
• TRACKS LIVE application for intuitive multitrack recording and playback – download from waves.com
• SoundGrid Studio Application for ASIO*/Core Audio recording and playback – download from waves.com
• Product is in stock

Brand:

Description: