EAW LA151
Brand:
EAWDescription:
- EAW LA151 15"+1" active loudspeaker
- 1500W
- High-quality HF and LF transducers
- EAW Focusing technology for unmatched clarity and accuracy
- Lightweight and durable resonant-free enclosure
- Linear Conical waveguide for consistent high-frequency performance
- Suitable for live production, music clubs, corporate AV, and houses of worship
- Product is in stock
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Product information: EAW LA Series spec sheet (.pdf)
Specifications
EAW LA151 spec:
Frequency Response: 43 Hz to 20 kHz
Max SPL: 136dB
Operating Mode: Bi-Amp LF, HF
Subsystem:
LF Transducer, 15in Cone, Vented
HF Transducer, Loading, 1.in Exit, 1.7in voice coil compression driver, Linear Conical Waveguide
Nominal Beamwidth: 90° Conical, Vertically Asymmetric (+40, -50)
Power Handling: 1500W
Connections:
IEC Connector
Input Type: Electronically Balanced XLR / TRS
Loop Type: Electronically Balanced XLR
Dimensions: 27,6 x 17,3x 16,9in (700 x 440 x 430mm)
Weight: 58lb (26,4kg)
EAW LA121
Brand:
EAWDescription:
- EAW LA121 12"+1" active loudspeaker
- 1500W
- High-quality HF and LF transducers
- EAW Focusing technology for unmatched clarity and accuracy
- Lightweight and durable resonant-free enclosure
- Linear Conical waveguide for consistent high-frequency performance
- Suitable for live production, music clubs, corporate AV, and houses of worship
- Product is in stock
1 piece
€949,00
Monthly payment from: 27,00 €
Downloads:
Product information: EAW LA Series spec sheet (.pdf)
Specifications
EAW LA121 spec:
Frequency Response: 47 Hz to 20 kHz
Max SPL: 135dB
Operating Mode: Bi-Amp LF, HF
Subsystem:
LF Transducer, 12in Cone, Vented
HF Transducer, Loading, 1.in Exit, 1.4in voice coil compression driver, Linear Conical Waveguide
Nominal Beamwidth: 90° Conical, Vertically Asymmetric (+40, -50)
Power Handling: 1500W
Connections:
IEC Connector
Input Type: Electronically Balanced XLR / TRS
Loop Type: Electronically Balanced XLR
Dimensions: 25.2 x 15 x 14.4in (640 x 380 x 365mm)
Weight: 43lb (19.5kg)
Klark Teknik KT-DANTE64
Klark Teknik KT-DANTE64
1 piece
€749,00
1 piece
€749,00
Klark Teknik KT-DANTE64
Brand:
Klark TeknikDescription:
- Klark Teknik KT-DANTE Audinate Dante* network module for Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
- Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
- Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac* computer)
- Primary and secondary Ethernet interfaces for dual-redundant Dante networking
- Operates from internal Dante network Precision Time Protocol (PTP) clock or external clock via host unit
- Optional Dante Controller software for remote configuration (PC or Mac computer)
- LED indicators monitor network activity and speed
- Product is in stock
1 piece
€749,00
Monthly payment from: 22,00 €
Klark Teknik KT-MADI
Brand:
Klark TeknikDescription:
- Klark Teknik KT-MADI MADI (AES10-compliant) network module with up to 64 bidirectional channels @ 48 kHz and 32 bidirectional channels @ 96 kHz
- Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
- Operates up to 500 m over optical fibre link and 200 m over coaxial copper link
- Optical transmission on SC-Duplex* connector
- Copper transmission on 75 ohm coaxial BNC connectors
- Dual-redundant operation with failover from optical to copper connections
- Operates as either MADI clock master, MADI clock slave or from external clock via host unit
- Product is in stock
1 piece
€352,00
Price per piece: 352,00 €
Klark Teknik KT-USB
Brand:
Klark TeknikDescription:
- Klark Teknik KT-USB USB 2.0 network module with up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz
- Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
- Simultaneous computer audio recording and playback
- LED indication of sample rate
- Windows* software driver available at klarkteknik.com
- Product is on order
1 piece
€345,00
Price per piece: 345,00 €
Downloads:
Quick start guide : Klark Teknik KT-USB Quick start guide (.pdf)
Download: KT-USB Audio Driver Download
Specifications
Connectors
USB 1 x USB 2.0, type B
Input/Output Characteristics
Channels of input/output @ 48kHz 48, bidirectional
Channels of input/output @ 96kHz 24, bidirectional
Sample rates 48 kHz/96 kHz
Sample word length 24 bit
Clock synchronization selectable DN9650 unit
Latency Platform/implementation dependent
WING-DANTE
Brand:
BehringerDescription:
- Behringer WING-DANTE 64-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- Low-latency 24-bit signal transmission with sample-accurate synchronization
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same Dante network
- WING remote control possible on the same network, using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at (www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- Product is on order
1 piece
€632,00
Monthly payment from: 18,00 €
Downloads:
Quick start guide : WING-DANTE Quick start guide (.pdf)
Klark Teknik DN32-Dante
Klark Teknik DN32-Dante
1 piece
€521,00
1 piece
€521,00
Klark Teknik DN32-Dante
Brand:
Klark TeknikDescription:
- Audinate Dante* expansion module for Midas and Behringer digital consoles
- Up to 32 bidirectional channels @ 48 kHz
- Enables multichannel recording and playback via Dante Virtual Soundcard* (PC or Mac* computer)
- Primary and secondary Ethernet interfaces for dual-redundant Dante networking
- Operates from internal Dante network Precision Time Protocol (PTP) clock
- Optional Dante Controller software for remote configuration (PC or Mac* computer)
- LED indicators monitor network activity and speed
- Product is in stock
1 piece
€521,00
Monthly payment from: 15,00 €
Downloads:
Product information : Klark Teknik DN32 Dante Product information (.pdf)
Quick start guide : Klark Teknik DN32 Dante Quick start guide (.pdf)
Klark Teknik DN32-WSG
Klark Teknik DN32-WSG
1 piece
€361,00
1 piece
€361,00
Klark Teknik DN32-WSG
Brand:
Klark TeknikDescription:
- WAVES SoundGrid network interface for Behringer X32 and Midas M32 mixing consoles
- Mix, record and play back with SoundGrid-plugins in extremely low latency
- 32 input and output channels of audio over IP networks
- 44.1 and 48 kHz sample rates, 24-Bit resolution
- Clock Sync-over-Ethernet (SoE) for digital splits and distributed audio processing
- Redundancy and recovery options in networked audio
- Connects your console to the plugin processing power of WAVES SoundGrid servers
- Compatible with standard computers and network switches
- TRACKS LIVE application for intuitive multitrack recording and playback – download from waves.com
- SoundGrid Studio Application for ASIO*/Core Audio recording and playback – download from waves.com
- Product is on order
1 piece
€361,00
Price per piece: 361,00 €
Klark Teknik DN32-Live
Klark Teknik DN32-Live
1 piece
€149,00
1 piece
€149,00
Klark Teknik DN32-Live
Brand:
Klark TeknikDescription:
- USB 2.0 expansion module for Midas and Behringer digital consoles
- 32-channel live recording and playback on dual SD/SDHC cards
- Up to 3 hours of 48 kHz/32-bit PCM recording of 32 channels in one session, stored as uncompressed WAV files
- Up to 32 bidirectional channels @ 48 kHz of recording and playback
- Independent operation of SD cards and USB recording / playback
- Remote control via PC, Android* or iPad* apps, assignable controls or compatible hardware control surfaces, such as the Behringer X-TOUCH
- Dual SD card slots to keep virtual sound check and live performance files separately available or for extended recording time
- Sample-accurate automatic spanning feature allows extending a session across both SD cards for more than 12 hours of 8-track recording time non-stop
- Instantaneous live playback with preload and markers in the console UI and remote apps
- Markers can be set on the fly for identifying song positions while recording or playing back
- All markers can be edited directly in the console GUI
- Seamless computer integration for virtual sound checks and software plug-ins
- Channel routing can be stored and automated for record/playback
- Secure file handling in the event of power blackout (optional CR123A Lithium cell required)
- Enables remote control of compatible DAW software via emulations of Mackie Control* and HUI* protocols
- Compatible with CoreAudio on Mac OSX* - ultra-low latency ASIO* drivers for Windows* PC available
- Product is in stock
1 piece
€149,00
Price per piece: 149,00 €
Downloads:
Product information : Klark Teknik DN32 Live Product information (.pdf)
Quick start guide : Klark Teknik DN32 Live Quick start guide (.pdf)