Lab gruppen FAD602
Brand:
Lab gruppenDescription:
- Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€435,00
Price per piece: 435,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD1202
Brand:
Lab gruppenDescription:
- Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€485,00
Price per piece: 485,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD2402
Lab gruppen FAD2402
1 piece
€532,00
1 piece
€532,00
Lab gruppen FAD2402
Brand:
Lab gruppenDescription:
- Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€532,00
Monthly payment from: 16,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen CMA1201
Brand:
Lab gruppenDescription:
- Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
- 4 mic/line inputs with individual volume controls
- Energy efficient design conserves energy and reduces
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Aux output for expansion to additional amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82
Brand:
Lab gruppenDescription:
- Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
- 8 mic/line inputs with individual volume controls and output routing
- Individual front panel master volume and bass/treble controls for each output
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 437 x 248 x 44mm
Weight : 2,4kg
Lab gruppen CM41
Brand:
Lab gruppenDescription:
- Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
- 4 mic/line inputs with individual volume controls
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€272,00
Price per piece: 272,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 299 x 218 x 44mm
Weight : 2,1kg
Lab gruppen IPX1200
Lab gruppen IPX1200
1 piece
€1 180,00
1 piece
€1 180,00
Lab gruppen IPX1200
Brand:
Lab gruppenDescription:
- Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 180,00
Monthly payment from: 34,00 €
Downloads:
Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo 300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg
Lab gruppen IPX2400
Lab gruppen IPX2400
1 piece
€1 496,00
1 piece
€1 496,00
Lab gruppen IPX2400
Brand:
Lab gruppenDescription:
- Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 496,00
Monthly payment from: 43,00 €
Downloads:
Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo 600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg
Lab gruppen E 12:2
Lab gruppen E 12:2
1 piece
€1 479,00
1 piece
€1 479,00
Lab gruppen E 12:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 479,00
Monthly payment from: 42,00 €
Downloads:
Spec sheet : Lab gruppen E 12:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W
Lab gruppen E 40:4
Lab gruppen E 40:4
1 piece
€2 790,00
1 piece
€2 790,00
Lab gruppen E 40:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
4 x 1,000 Watts into Hi-Z 100 V - Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 790,00
Monthly payment from: 79,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 20:4
Lab gruppen E 20:4
1 piece
€2 649,00
1 piece
€2 649,00
Lab gruppen E 20:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 649,00
Monthly payment from: 75,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 10:4
Lab gruppen E 10:4
1 piece
€2 090,00
1 piece
€2 090,00
Lab gruppen E 10:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 090,00
Monthly payment from: 60,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg
*See spec sheet for details
Lab gruppen E 5:4
Lab gruppen E 5:4
1 piece
€1 890,00
1 piece
€1 890,00
Lab gruppen E 5:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 890,00
Monthly payment from: 54,00 €
Downloads:
Spec sheet : Lab gruppen E 5:4 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg
Lab gruppen E 2:2
Brand:
Lab gruppenDescription:
- Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€899,00
Monthly payment from: 26,00 €
Downloads:
Spec sheet : Lab gruppen E 2:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 8:2
Lab gruppen E 8:2
1 piece
€1 379,00
1 piece
€1 379,00
Lab gruppen E 8:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 379,00
Monthly payment from: 40,00 €
Downloads:
Spec sheet : Lab gruppen E 8:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 4:2
Lab gruppen E 4:2
1 piece
€1 090,00
1 piece
€1 090,00
Lab gruppen E 4:2
Brand:
Lab gruppenDescription:
- Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Spec sheet : Lab gruppen E 4:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen PD3000
Brand:
Lab gruppenDescription:
- Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
- Precise power management guarantees performance and efficiency
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Accurate 8-segment Signal and Limit LEDs for performance monitoring
- Integrated crossover with low-cut, high-cut and full range mode
- Comprehensive circuit protection against short circuits, DC and thermal overload
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
- Product is on order
1 piece
€609,00
Monthly payment from: 18,00 €
Downloads:
Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg
Lab gruppen PDX3000
Lab gruppen PDX3000
1 piece
€705,00
1 piece
€705,00
Lab gruppen PDX3000
Brand:
Lab gruppenDescription:
- Lab gruppen PDX3000 2-channel amplifier
- 2x 800W @8Ohm
- 2x 1500W @4Ohm
- 2x 1000W @2Ohm
- Full DSP feature set for speaker processing
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Comprehensive configuration and monitoring software through USB connection
- Intuitive front panel user interface for easy setup and monitoring
- Precise power management guarantees performance and efficiency
- Comprehensive circuit protection against short circuits, DC and thermal overload
- User configurable gain, delay, crossover, EQ, limiter and dynamic EQ
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Pre-configured crossover settings for speaker configuration
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Front panel locking functionality for ultimate security
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
- Designed and engineered in Sweden
- Product is on order
1 piece
€705,00
Monthly payment from: 20,00 €
Downloads:
Specifications
Dimensions : 483 x 326 x 93mm
Weight : 6,5kg