Midas XL4-2 2-Channel Vacuum Tube Microphone Preamplifier
Midas XL4-2 2-Channel Vacuum Tube Microphone Preamplifier
1 piece
€239,00
1 piece
€239,00
Midas XL4-2 2-Channel Vacuum Tube Microphone Preamplifier
Brand:
MidasDescription:
Midas XL4-2 2-Channel Vacuum Tube Microphone Preamplifier
Classic tube preamplification with Class-A design
Midas XL4-2 is a 2-channel vacuum tube microphone preamplifier designed for vocals, instruments and line-level sources. Its Class-A dual-mono architecture, 12AX7 vacuum tubes and AIR circuitry are designed to deliver warm, clear and controllable signal handling in studio, live and recording applications.
The unit offers a wide gain range, illuminated VU meters, phantom power, low cut filter, phase reverse and pad functions in a rugged 2U rackmount chassis. Available technical information also lists balanced XLR microphone inputs, balanced XLR and 1/4" TRS outputs, universal mains power support and a maximum power consumption of 30 W.
- 2 balanced XLR microphone inputs
- 2 balanced XLR and 2 balanced 1/4" TRS outputs
- Gain range: +20 to +72 dB
- 12AX7 vacuum tubes and AIR circuitry
- Dimensions: 88.0 x 482.6 x 159 mm
- Product is on order
*Quick start guide available. Add final webshop asset URLs before publishing.
1 piece
€239,00
Price per piece: 239,00 €
Downloads:
Quick start guide : Midas XL4-2 quick start guide (.pdf)
Specifications
| Brand | Midas |
| Model | XL4-2 |
| Type | Vacuum tube microphone preamplifier |
| Channels | 2 |
| Inputs | 2 x XLR, balanced |
| Outputs | 2 x XLR, 2 x 1/4" TRS, balanced |
| Gain range | +20 to +72 dB |
| Tubes | 12AX7 vacuum tubes |
| Mains voltage | 100 - 240 V~, 50/60 Hz |
| Power consumption | 30 W max |
| Dimensions (H x W x D) | 88.0 x 482.6 x 159 mm |
| Weight | 2.74 kg |
Midas DN4888 StageCONNECT interface with 8x8 analogue I/O
Midas DN4888 StageCONNECT interface with 8x8 analogue I/O
1 piece
€316,00
1 piece
€316,00
Midas DN4888 StageCONNECT interface with 8x8 analogue I/O
Brand:
MidasDescription:
Midas DN4888 StageCONNECT Interface with 8x8 Analogue I/O
Flexible analogue breakout and StageCONNECT expansion
Midas DN4888 is a bus-powered StageCONNECT interface with 8 analogue inputs, 8 analogue outputs and dual Ultranet outputs. It is designed for StageCONNECT systems and can also be used as an analogue I/O breakout with compatible StageCONNECT devices, Turbosound iQ loudspeakers, Behringer WING consoles and Ultranet receivers such as P16 personal monitoring mixers.
The unit supports 32-channel StageCONNECT audio transmission with 24-bit uncompressed PCM audio at 44.1 / 48 kHz and extremely low I/O latency. It can be cascaded with DN4816-I and DN4816-O units for expanded analogue input and output capacity, and it supports bi-directional audio configurations with control data and remote power.
- 8 x XLR analogue inputs and 8 x XLR analogue outputs
- 2 x Ultranet outputs for direct integration with compatible monitoring and loudspeaker systems
- 32-channel StageCONNECT transmission with 24-bit PCM audio
- External power supply included for standalone operation
- Dimensions: 49 x 483 x 169 mm
- Weight: 2.2 kg
- Product is in stock
*Series-level quick start guide available for DN4800 Series models DN4888, DN4816-I and DN4816-O.
1 piece
€316,00
Price per piece: 316,00 €
Downloads:
Quick start guide : Midas DN4800 Series quick start guide (.pdf)
Specifications
| Brand | Midas |
| Model | DN4888 |
| Type | StageCONNECT interface |
| Analogue I/O | 8 x XLR female inputs, 8 x XLR male outputs |
| Ultranet outputs | 2 x RJ45 |
| StageCONNECT bus capacity | 32 channels, 24-bit PCM audio |
| Sample rates | 48 / 44.1 kHz |
| Frequency response | 20 Hz - 20 kHz ±0.2 dB |
| I/O latency | < 0.05 ms |
| Power supply | 12 VDC / 2.5 A (30 W) adapter included |
| Power consumption | 8.5 W |
| Dimensions | 49 x 483 x 169 mm |
| Weight | 2.2 kg |
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
1 piece
€19 599,00
1 piece
€19 599,00
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
Brand:
MidasDescription:
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
144 channels, 123 mix buses, 96 kHz in a portable frame
144 kanalit, 123 mix‑bussi ja 96 kHz kompaktses korpuses
The HD96‑AIR‑CC‑IP brings the full power of the Heritage‑D engine into a lightweight live console. You get up to 144 input channels, 123 mix buses and a 96 kHz mix engine, all controlled via a 21″ glare‑resistant multi‑touch display with gesture support.
Local I/O provides 8 × XLR mic/line inputs and 8 × XLR outputs, each reconfigurable as AES3, plus HyperMAC and AES50 ports for connecting stageboxes and networked I/O. Under the hood you have the same DSP class as HD96‑24: deep processing, powerful FX, and time‑aligned, phase‑coherent mix architecture in a console that weighs only around 16.7 kg.
With 24 VCAs, 24 POPulation groups, up to 24 multi‑channel FX engines plus extensive dynamic EQ and multi‑band compression, HD96‑AIR is designed for tour sound, rentals and high‑end installs that need HD‑class power in a compact footprint.
Product is on order>Product is in stock>Product is on order>1 piece
€19 599,00
Monthly payment from: 555,00 €
Downloads:
Product information : ProductName Product information (.pdf)
Quick start guide : ProductName Quick start guide (.pdf)
Specifications
Specifications
Mix Engine & Capacity
| Type | Live digital console (Heritage‑D HD96‑AIR series) |
| Input Channels | Up to 144 input channels |
| Mix Buses | 123 time‑aligned, phase‑coherent mix buses |
| Sample Rate | 96 kHz |
Control Surface
| Screen | 21" glare‑resistant multi‑touch TFT display |
| Faders | 3 × 100 mm motorized faders (Midas PRO) |
| Control Groups | 24 VCAs, 24 POPulation Groups |
Local I/O & Networking
| Local Inputs | 8 × XLR (analog mic/line or AES3, switchable) |
| Local Outputs | 8 × XLR (analog line or AES3, switchable) |
| Network Audio | HyperMAC (copper/optical) and AES50 over etherCON |
| Word Clock | 2 × BNC (In/Out) |
Control & Connectivity
| USB | Multiple USB ports for storage/control (Type‑A) plus service ports |
| Network / HDMI | Ethernet control port; dual HDMI outputs (for external displays) |
| Wireless | Built‑in Wi‑Fi & Bluetooth 5.0 (remote control / connectivity) |
| I/O Expansion | 2 × expansion card slots |
Power & Physical
| Power | Dual‑redundant auto‑ranging PSUs (2 × IEC) |
| Dimensions (W × D × H) | Approx. 465 × 806 × 211 mm (18.3" × 31.7" × 8.3") |
| Weight | Approx. 16.7 kg (36.8 lb) |
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
1 piece
€3 289,00
1 piece
€3 289,00
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
Brand:
MidasDescription:
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
HyperMAC ↔ AES50 redundancy hub for HD96 systems
The Midas AS88 is a compact, rugged dual HyperMAC to 8‑port dual‑redundant AES50 converter. It bridges the HD96 console’s HyperMAC network to multiple AES50 stageboxes, providing up to 192 bidirectional channels at 96 kHz with full cable and PSU redundancy. :contentReference[oaicite:4]{index=4}
Built around advanced FPGA‑based switching, the AS88 automatically fails over to its redundant HyperMAC path when needed, while connection status LEDs report the state of each snake and power supply at a glance. :contentReference[oaicite:5]{index=5}
Key features
- Dual HyperMAC → 8 AES50 SuperMAC conversion for large HD96 systems.
- Up to 192 bidirectional channels at 96 kHz over networked copper/optical lines.
- Dual redundant, auto‑ranging switch‑mode PSU with 2 × IEC inlets for independent mains feeds.
- 2U rackmount chassis designed for touring and fixed installs alike.
- Neutrik etherCON connectors for AES50/copper snake and opticalCON DUO for fiber HyperMAC.
- Clocking from incoming AES50 or HyperMAC ports, with redundancy status visible on connected HD96 consoles.
- Product is on order
Whether you’re building a high‑channel‑count Heritage‑D HD96‑24 or HD96‑AIR rig, the AS88 is the central patch box that keeps your HyperMAC and AES50 worlds connected and fully redundant.
1 piece
€3 289,00
Monthly payment from: 94,00 €
Specifications
Specifications
System & Conversion
| Type | Dual HyperMAC to 8‑port dual‑redundant AES50 converter |
| Conversion | HyperMAC / AES50 converter, 2 In / 16 Out (dual redundancy) |
| Max Channels | Up to 192 bidirectional channels @ 96 kHz |
| Sample Rate | 96 kHz |
Connectors & I/O
| HyperMAC (optical) | 2 × dual‑fibre Neutrik opticalCON DUO connectors (rear) |
| HyperMAC (copper) | 2 × Neutrik etherCON (rear) |
| AES50 Outputs | 16 × Neutrik etherCON RJ45 sockets (rear) |
| Ethernet | 1 × RJ45 (rear) |
| Status Indicators | 2 × 20‑character LCD; LED status for Snake X/Y, PSUs, AES50 lines and Ethernet |
Power
| Power Supply | Dual redundant auto‑ranging switch‑mode PSU |
| AC Input | 100–240 VAC, 50/60 Hz, 2 × IEC C13 inlets |
| Power Consumption | 25 W (max) |
Physical
| Form Factor | 2U, 19″ rackmount chassis |
| Dimensions (W × D × H) | 48.29 × 43.99 × 8.79 cm (19.01 × 17.32 × 3.46″) |
| Weight | 6.59 kg (14.53 lb) |
| Colour | Black |
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
1 piece
€1 890,00
1 piece
€1 890,00
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
Brand:
MidasDescription:
Midas HD96‑FB16 – 16‑Channel Fader Bay
Portable control surface for HD Series consoles
The HD96‑FB16 adds hands‑on control to your HD96 setup with 16 motorised 100 mm faders, Mute and Select buttons per strip, and ultra‑clear 24×240 LCD channel displays for fast identification and navigation.
- HD Series integration via USB; expand your surface and streamline your workflow.
- Scale up to four FB16s for large shows and 64+ physical faders.
- Compact & road‑friendly: 97 × 476 × 269 mm; 4.3 kg.
- Product is on order
Compatible with HD96‑AIR and HD96‑24 consoles (HD Series).
1 piece
€1 890,00
Monthly payment from: 54,00 €
Specifications
| Type | Portable fader bay for HD Series consoles |
| Control Strips | 16 channels |
| Faders | 16 × motorised 100 mm (Midas PRO) |
| Per‑Channel Display | 16 × 24×240 LCD |
| Channel Buttons | Mute, Select (per strip) |
| Connectivity | USB to HD96‑AIR / HD96‑24 |
| Expansion | Use up to 4 FB16 units |
| Dimensions (H × W × D) | 97 × 476 × 269 mm (3.84 × 18.75 × 10.6") |
| Weight | 4.3 kg (9.5 lb) |
Midas COBALT
Brand:
MidasDescription:
Midas COBALT HyperMAC‑to‑USB3 Converter
192‑Channel Recording & Playback on macOS – Compact, Rugged, Redundant
Midas COBALT bridges your computer and any HyperMAC audio network, delivering up to 192 bidirectional channels at 48 kHz or 96 kHz with zero compromise in audio quality. Its dual RJ45 ports provide automatic redundancy, while the USB‑C 3.0 connection (bus‑powered and locking) ensures rock‑solid stability in demanding live or studio environments.
Sync‑status LEDs offer instant diagnostics, and the blue brushed‑aluminum chassis slips easily into a backpack or the included carry case. Whether you’re capturing large‑format concerts or feeding virtual sound‑check sessions, COBALT gives you uncompromising Midas performance in the palm of your hand.
Key Features:
- Up to 192 × 192 channels via HyperMAC and USB‑C
- Switchable 48 kHz / 96 kHz sample‑rate conversion
- Dual redundant HyperMAC ports for seamless backup
- USB‑C bus‑powered; no external PSU required
- Locking USB‑C and RJ45 connectors for touring security
- Compact 45.8 × 141.2 × 83.8 mm, only 343 g
- Product is in stock
Order Midas COBALT today and experience effortless, high‑channel‑count recording and playback wherever your next gig takes you.
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Quick start guide : Midas Cobalt Quick start guide (.pdf)
Specifications
Specifications
| SKU / Model Code | 0606‑ADY |
| EAN | TBD |
| USB | 1 × USB 3.0 Type‑C (locking, bus‑powered) |
| HyperMAC I/O | 2 × RJ45 (dual redundant) |
| Sample Rates | 48 kHz / 96 kHz (switchable) |
| Bit Depth | 24‑bit |
| Power | USB bus‑powered (no external PSU) |
| Dimensions (H × W × D) | 45.78 × 141.24 × 83.82 mm / 1.8 × 5.56 × 3.3 in |
| Weight | 0.344 kg / 12.1 oz |
| Included | Carry case, USB‑C cable |
| Compatibility | macOS (CoreAudio), major DAWs |
Midas DL8
Brand:
MidasDescription:
Midas DL8 Stagebox
Advanced Connectivity for Every Need
The Midas DL8 is a professional 8-channel stage box that offers flexible connectivity and reliability for both stage and permanent installations. Equipped with Midas PRO microphone preamps, the DL8 ensures exceptional audio quality. Beyond its analog inputs and outputs, the DL8's ULTRANET and AES50 SuperMAC interfaces provide seamless integration for personal monitoring and large audio systems.
Key Features:
- 8 Midas PRO microphone preamps with +48 V phantom power
- 8 balanced XLR outputs for reliable connections
- ULTRANET distribution hub, ideal for Behringer P16-M personal monitors
- AES50 SuperMAC ports for cascading additional stageboxes
- Rugged chassis, perfect for both stage and installation use
- Neutrik etherCON ports with CAT5e remote operation up to 100 meters
- Product is on order
Don't miss out! Order the Midas DL8 stagebox from Heliart Webshop today and elevate your audio systems to the next level!
1 piece
€599,00
Monthly payment from: 17,00 €
Downloads:
Quick start guide : Midas DL8 Quick start guide (.pdf)
Specifications
| Signal Processing | 24-bit @ 44.1 / 48 kHz, 114 dB dynamic range (A-weighted) |
| I/O Latency | 1.1 ms |
| Connectivity | - 8 programmable Midas microphone preamps - 8 balanced XLR outputs - 2 ULTRANET outputs, RJ45 - 2 AES50 ports, NEUTRIK etherCON - 1 USB port for system updates, type B |
| Microphone Input Characteristics | - Microphone input impedance: 5 kΩ / 10 kΩ - Phantom power: +48 V, switchable per input - THD + noise: < 0.006%, unweighted - Equivalent input noise level: -125 dBu |
| Input/Output Characteristics | - Frequency response: 10 Hz - 22 kHz - Dynamic range: 106 dB - A/D converter: 109 dB - Crosstalk: 100 dB |
| Digital Input/Output | - AES50 SuperMAC: 2 x 48 channels, bidirectional - ULTRANET: 2 outputs - ULTRANET cable length: up to 75 m, CAT5 |
Behringer MX882 V2
Brand:
BehringerDescription:
- Behringer MX882 V2 Ultra-low noise 8 in / 2 out line mixer and 2 in / 8 out line splitter
- Each channel can operate independently in mixer or splitter mode
- Usable as 6 in / 6 out level matching amplifier or line driver
- Converts levels between -10 dBV and +4 dBu
- Extremely wide bandwidth for highest signal integrity
- 6 mono in, 6 mono out, 2 main inputs and 2 outputs
- 8-segment input/output level meters for all channels
- Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
- Product is on order
1 piece
€120,00
Price per piece: 120,00 €
Downloads:
Quick start guide : Behringer MX882 V2 Quick start guide (.pdf)
Specifications
Audio Inputs
Connectors: XLR and 1/4" TRS
Type: RF-filtered, servo-balanced input
Impedance: 40 kΩ balanced, 20 kΩ unbalanced
Nominal operating level: -10 dBV to +4 dBu
Max. input level: +21 dBu, balanced and unbalanced
CMRR: Typically >55 dB @ 1 kHz
Audio Outputs
Connectors: XLR and 1/4" TRS
Type: Electronically servo-balanced output stage
Impedance: 100 Ω balanced & unbalanced
Max. output level: +21 dBu, balanced and unbalanced
System Specifications
Frequency response: 10 Hz to 130 kHz, +/- 3 dB
Signal-to-noise ratio: >95 dBu, unweighted, 22 Hz to 22 kHz
THD: 0.003% typical @ +4 dBu, unity gain
Function Controls
Main input level: Variable
Main output level: Variable
Level: Variable for each channel
Balance/pan: Stereo field placement
Function Switches
Main link: Links the main input signal to the main output
Split/mix: Changeover from split to mix mode for each channel
Indicators
Input level (main): 4-digit LED display: -24/-12/0/+6 dB
Output level (main): 4-digit LED display: -24/-12/0/+6 dB
Input/output level: 8-digit LED display: -24/-18/-12/-6/0/+6/+12/+18 dB
Power Supply
Switch-mode autorange power supply: 100-240 V ~50/60 Hz
Power consumption: 15 W
Mains connection: Standard IEC connector
Physical
Dimensions: H x W x D 44 x 483 x 149 mm (1.7 x 19 x 5.9")
Weight: 1.7 kg (3.7 lbs)
Behringer MS8000
Brand:
BehringerDescription:
- Behringer MS8000 Ultralink microphone splitter
- Ultra-low noise 8 in/16 out microphone splitter
- Each channel features Direct and Link outputs
- Output ground lift switch per channel
- Flexible input link switches
- Phantom power link to Direct Output
- Product is on order
1 piece
€99,00
Price per piece: 99,00 €
Downloads:
Quick start guide : Behringer MS8000 Quick start guide (.pdf)
Specifications
Dimensions : 44 x 483 x 65 mm
Weight : 1,1 kg
Midas AS80
Brand:
MidasDescription:
- Midas AS80 Single HyperMac to dual HMAC converter for running dual redundant 1 GBit connections
- Up to 192 bidirectional channels at 96 kHz
- Dual redundant auto-ranging universal switch-mode power supply
- Compact and rugged design
- 1U rackmountable design
- Clocked from incoming HMAC ports
- Connection redundancy status available from connected console indicating cable state
- Neutrik etherCON * connectors used for AES50 ports and copper snake connection
- Dual-fibre Neutrik opticalCON DUO * connector used for optical fibre snake connection
- Product is on order
1 piece
€2 048,00
Monthly payment from: 58,00 €
Downloads:
Quick start guide : Midas AS80 Quick start guide (.pdf)
Specifications
Dimensions : 44 x 483 x 436 mm
Weight : 5,1kg
EAW UXA4401
Brand:
EAWDescription:
- EAW UXA4401 4-channel amplifier
- 280W 4/8Ohm
- Half rack extension and rear support hardware
- Connection plate for 2x units & desk/wall mounting plate options
- 4 inputs & 4 outputs
- Pairs seamlessly with EAW installation loudspeakers
- Optional Sync Functionality by S/PDIF linking to multiple amps
- Connect wirelessly or direct to the amplifier via a web page interface
- Configurable GPIO for additional control
- Safety and EMC Certified. Compliant to ErP & EnergySTAR
- Product is on order
1 piece
€1 490,00
Monthly payment from: 43,00 €
Downloads:
Specification sheet: EAW UXA4401 specification sheet (.pdf)
Specifications
EAW UXA4401
Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit
EAW MKC 50
Brand:
EAWDescription:
- EAW MKC50 5,25"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is in stock
1 piece
€339,00
Price per piece: 339,00 €
Downloads:
Specification sheet: EAW MKC50 specification sheet (.pdf)
Specifications
Model: MKC50
Frequency Response: 80Hz-20kHz
Max SPL: 121dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 150W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 235 x 165 x 141mm
Weight: 3.3kg
EAW MKC 60
Brand:
EAWDescription:
- EAW MKC50 6,5"+1" 2-way coaxial speaker for installation
- With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
- Pristine Audio
- Smaller Package
- Flexibility Is Key
- Versatility For
- A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
- The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
- Other deployment options include a ceiling and support for third-party mic stand mount
- Available as standard in black or white
- Product is on order
1 piece
€595,00
Monthly payment from: 17,00 €
Downloads:
Specification sheet: EAW MKC60 specification sheet (.pdf)
Specifications
Model: MKC60
Frequency Response: 70Hz-20kHz
Max SPL: 125dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 6,5″ Cone, 1.5″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 250W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 324 x 208 x 206mm
Weight: 4,9kg
EAW MKC 80
Brand:
EAWDescription:
- EAW MKC80 8"+1" installation loudspeaker
- High output, compact coaxial loudspeaker
- Patented CSA coaxial horn provides superior control, fidelity and output
- Integrated handle and pole mount
- Weather protection and transformer options
- Companion UXA4403 amplifiers
- Versatile accessories for a vast range of applications
- Product is on order
1 piece
€890,00
Monthly payment from: 26,00 €
Specifications
Model: MKC80
Frequency Response: 60Hz-20kHz
Max SPL: 132dB
Operating Mode: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:
LF Transducer – 1x8in cone, 2in VC, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominal Beamwidth: 90 x 60 degrees, rotatable
Power Handling: 450W @ 8ohms
Connections: 2x Neutrik NL4, 2-pin barrier strip
Dimensions: 422 x 255 x 267mm
Weight: 10kg
Spec sheet and quick start guide
Specification sheet: EAW MKC80 specification sheet (.pdf)
Behringer RX1602 V2
Brand:
BehringerDescription:
- Behringer RX1602 V2 Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
- 16 balanced high-headroom line inputs for individual stereo or mono use of each section
- Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
- Dedicated balance and level controls plus +4/-10 level selection per channel
- Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
- Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
- Monitor/FX signal assignable to phones output for added flexibility
- Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
- 1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
- High-quality detented rotary controls for long-term reliability
- Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
- Product is on order
1 piece
€138,00
Price per piece: 138,00 €
Downloads:
Quick start guide : Behringer RX1602 V2 Quick start guide (.pdf)
Specifications
Dimensions : 44 x 483 x 149 mm
Weight : 1,8kg
Midas DN4816-I
Brand:
MidasDescription:
- Midas DN4816-I Bus-Powered StageCONNECT Interface with 16 Analog Inputs and Dual Ultranet Outputs
- Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
- Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is available for preorder
1 piece
€319,00
Price per piece: 319,00 €
Downloads:
Quick start guide : Midas DN4816-I Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Midas DN4816-O
Brand:
MidasDescription:
- Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
- Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
- Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is on order
1 piece
€339,00
Price per piece: 339,00 €
Downloads:
Quick start guide : Midas DN4816-O Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Spec sheet and quick start guide
Mõõdud : 483 x 169 x 49mm
Kaal : 2,2kg
KLARK TEKNIK DN4816U
Brand:
Klark TeknikDescription:
- KLARK TEKNIK DN4816U Bus-Powered StageCONNECT Interface Bridge with Multi-Channel USB I/O and Behringer Ultranet I/O
- DI Box sized interface for connecting StageConnect devices to Behringer Ultranet systems and USB multi-channel audio
- StageConnect 32-channel audio transmission at sub-milisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz, using standard XLR microphone or DMX cable
- Asynchronous 32-channel sample rate conversion allows connecting different clock domains and sample rates with 0.4 ms latency and 140 dB dynamic range
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master and Slave ports allow exchanging multi-channel audio with a chain of other StageConnect devices
- Can be used for sending StageConnect or USB signals to P16 personal monitoring mixers or Turbosound iQ speakers Behringer Ultranet signals can be converted to StageConnect or USB streams
- Slave mode for use with StageConnect enabled mixing consoles, stageboxes and hubs
- External power supply for stand-alone use and offering remote power on the StageConnect Master output
- Product is on order
1 piece
€209,00
Price per piece: 209,00 €
Downloads:
Quick start guide : KLARK TEKNIK DN4816U Quick start guide (.pdf)
Specifications
Dimensions : 118 x 112 x 63mm
Weight : 0,71kg
Midas DN4888
Brand:
MidasDescription:
- Midas DN4888 Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
- Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is on order
1 piece
€369,00
Price per piece: 369,00 €
Downloads:
Quick start guide : Midas DN4888 Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Midas Heritage-D HD96-24 TP
Midas Heritage-D HD96-24 TP
1 piece
€29 400,00
1 piece
€29 400,00
Midas Heritage-D HD96-24 TP
Brand:
MidasDescription:
- Midas Heritage-D HD-96-TP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
- 120 time-aligned and phase-coherent mix buses
- 21" full colour TFT display screen with capacitive touch sensing
- Advanced and multi-gesture touchscreen user interface
- Award-winning Midas microphone preamplifiers
- HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
- Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
- 24 VCA (variable control association) groups, and unlimited POPulation groups
- Up to 24 multi-channel digital signal processing effects engines
- Integrated Wireless transceiver module
- Dual ULTRANET Ports providing 32 additional digital outputs
- 28 Midas PRO motorised 100 mm faders
- Fully interpolated touch sensitive controls
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€29 400,00
Monthly payment from: 832,00 €
Downloads:
Product manual : Midas Heritage-D HD-96 manual (.pdf)
Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)
Specifications
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg
Klark Teknik DM TCE-EU
Klark Teknik DM TCE-EU
1 piece
€245,00
1 piece
€245,00
Klark Teknik DM TCE-EU
Brand:
Klark TeknikDescription:
- Klark Teknik DM TCE-EU 2.3" colour touch screen controller
- User programmable encoder and button
- POE powered device
- Support for multiple pages and controls from DM series devices
- Single gang EU size
- Black and white single gang trim plates and encoder knobs included
- Programmable using DM KONTROL application
- Product is on order
1 piece
€245,00
Price per piece: 245,00 €
Downloads:
Quick start guide : Klark Teknik DM TCE-EU Quick start guide (.pdf)
Specifications
Dimensions : 86,36 x 86,36 x 53,75mm
Weight : 0,16kg
Klark Teknik CP8000EU
Brand:
Klark TeknikDescription:
- Klark Teknik CP8000EU Wall plate remote control for DM8000
- Volume control may be assigned to either auxiliary input section or main mix bus
- Selection of auxiliary inputs 1-6
- All Illuminated, soft touch controls powered remotely from DM8000
- Use CAT5/6 or any 5 conductor cable for connection distances up to 300 feet (100 m)
- Compact, single gang format allows use with low voltage trim rings and most standard depth enclosures
- Generous space provided for input labeling
- Discrete appearance matches any decor
- Product is on order
1 piece
€56,00
Price per piece: 56,00 €
Downloads:
Quick start guide : Klark Teknik CP8000EU Quick start guide (.pdf)
Specifications
Dimensions : 80 x 80 x 36mm
Weight : 0,07kg
Midas Heritage-D HD96-24 IP
Midas Heritage-D HD96-24 IP
1 piece
€27 800,00
1 piece
€27 800,00
Midas Heritage-D HD96-24 IP
Brand:
MidasDescription:
- Midas Heritage-D HD-96-IP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
- 120 time-aligned and phase-coherent mix buses
- 21" full colour TFT display screen with capacitive touch sensing
- Advanced and multi-gesture touchscreen user interface
- Award-winning Midas microphone preamplifiers
- HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
- Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
- 24 VCA (variable control association) groups, and unlimited POPulation groups
- Up to 24 multi-channel digital signal processing effects engines
- Integrated Wireless transceiver module
- Dual ULTRANET Ports providing 32 additional digital outputs
- 28 Midas PRO motorised 100 mm faders
- Fully interpolated touch sensitive controls
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€27 800,00
Monthly payment from: 787,00 €
Downloads:
Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)
Specifications
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg
Klark Teknik DF1000
Brand:
Klark TeknikDescription:
- Klark Teknik DF1000 Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
- Offers up to 10 dB increase in system gain
- Instantly detects and stops acoustic feedback. Highly effective with both speech and music
- Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
- Two fully independent audio channels to process stereo or separate zone signals
- Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
- Front panel control featuring suppression and filter reset buttons
- Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
- Auto-ranging universal switch-mode power supply
- Product is on order
1 piece
€205,00
Price per piece: 205,00 €
Downloads:
Quick start guide : Klark Teknik DF1000 Quick start guide (.pdf)
Specifications
Dimension : 483 x 296 x 50 mm
Weight : 2,9kg
Klark Teknik DM8500
Klark Teknik DM8500
1 piece
€2 574,00
1 piece
€2 574,00
Klark Teknik DM8500
Brand:
Klark TeknikDescription:
- Klark Teknik DM8500 Networked open architecture digital audio processor
- 64 x 64 channel, dual-redundant Dante*/AES67 audio transport
- 10 high-headroom analogue mic/line inputs
- 6 electronically balanced, low impedance line level outputs
- 24 channels of freely assignable Acoustic Echo Cancellation
- 16 channel ULTRANET audio output bus
- Class-compliant USB connection for integration with soft codec conferencing applications
- System configuration and control via ethernet
- Embedded HTML engine to serve custom control pages
- Integrated control modules for Lab Gruppen D series and Lucia amplifiers
- Embedded media engine for audio playback and recording
- RS232 connector for interfacing with 3rd party control systems
- 6 user-configurable general purpose input output connections (GPIO)
- Auto-ranging universal power supply
- Product is on order
1 piece
€2 574,00
Monthly payment from: 73,00 €
Downloads:
Quick start guide : Klark Teknik DM8500 Quick start guide (.pdf)
Specifications
Dimensions : 483 x 293 x 44mm
Weight : 3,6 kg
Lab gruppen FAD602
Brand:
Lab gruppenDescription:
- Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€529,00
Monthly payment from: 15,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD1202
Lab gruppen FAD1202
1 piece
€579,00
1 piece
€579,00
Lab gruppen FAD1202
Brand:
Lab gruppenDescription:
- Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€579,00
Monthly payment from: 17,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD2402
Lab gruppen FAD2402
1 piece
€669,00
1 piece
€669,00
Lab gruppen FAD2402
Brand:
Lab gruppenDescription:
- Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€669,00
Monthly payment from: 19,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen CMA1201
Brand:
Lab gruppenDescription:
- Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
- 4 mic/line inputs with individual volume controls
- Energy efficient design conserves energy and reduces
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Aux output for expansion to additional amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82
Brand:
Lab gruppenDescription:
- Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
- 8 mic/line inputs with individual volume controls and output routing
- Individual front panel master volume and bass/treble controls for each output
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 437 x 248 x 44mm
Weight : 2,4kg