Behringer ECM PRO ultra-linear measurement microphone
Behringer ECM PRO ultra-linear measurement microphone
1 piece
€71,00
1 piece
€71,00
Behringer ECM PRO ultra-linear measurement microphone
Brand:
BehringerDescription:
Behringer ECM PRO – ultra-linear measurement condenser microphone
Omnidirectional RTA mic for room calibration and monitor alignment
The Behringer ECM PRO is a high‑precision ultra-linear condenser measurement microphone designed for use with real‑time analysers and room tuning tools. Its omnidirectional polar pattern captures an unbiased acoustic snapshot of your room, while the 20 Hz–30 kHz frequency response ensures accurate results across the entire audio spectrum.
Paired with analyzers such as REW or Behringer’s ULTRACURVE DEQ2496, ECM PRO helps you optimise studio monitors, PA systems and listening rooms. The highly linear response and low self-noise make it equally useful as an ambient / room microphone for recording, where transparency and neutrality are critical.
Key features:
- Ultra‑linear measurement condenser microphone for RTA and calibration.
- Omnidirectional pattern for even, all‑angle room capture.
- 20 Hz–30 kHz frequency response for wide‑band measurements.
- Handles up to 132 dB SPL for high‑level systems.
- 600 Ω output impedance, balanced XLR connector.
- Powered via 48 V phantom power from your mixer or interface.
- Includes mic clip and zippered carry case for safe transport.
- Product is on order
Use the ECM PRO to calibrate studio control rooms, fine‑tune live sound systems, or verify the performance of installations. Thanks to the small‑diaphragm design and flat voicing, it is also well‑suited to room and ambience miking in classical, acoustic and broadcast work.
1 piece
€71,00
Price per piece: 71,00 €
Specifications
Behringer ECM PRO – Specifications
General
| Microphone type | Condenser, measurement (RTA) |
| Application | Room calibration, studio monitor alignment, acoustic measurements |
Audio performance
| Polar pattern | Omnidirectional |
| Frequency response | 20 Hz – 30 kHz (ultra-linear) |
| Max SPL | 132 dB SPL |
| Output impedance | 600 Ω |
Connections & power
| Connector | Balanced 3‑pin XLR, gold‑plated |
| Power supply | 48 V phantom power |
Physical
| Weight | Approx. 0.2 lbs / 0.1 kg |
| Included accessories | Microphone clamp, zippered carry case |
Behringer CB100 VIOLIN – Condenser Microphone System for Violin
Behringer CB100 VIOLIN – Condenser Microphone System for Violin
1 piece
€49,00
1 piece
€49,00
Behringer CB100 VIOLIN – Condenser Microphone System for Violin
Brand:
BehringerDescription:
Behringer CB100 VIOLIN – Condenser Microphone System for Violin
Clip-on cardioid microphone system for violin with gooseneck mount
The Behringer CB100 VIOLIN is a compact condenser microphone system for violin, designed to capture the warm, natural tone of your instrument on stage and in the studio. A highly directional cardioid pickup pattern helps reject unwanted background noise, while the flexible gooseneck makes it easy to find the perfect position over the soundboard or f‑holes.
The included violin mounting kit uses soft rubber padding to protect your instrument from scratches, and the integrated XLR cable gives you plenty of freedom to move on stage without tangling your setup. Powered via the supplied phantom power converter (9–52 V phantom, typically 48 V), the CB100 VIOLIN delivers a 50 Hz – 18 kHz frequency response, low noise floor and high SPL handling – ideal for expressive, dynamic violin performances.
Key features:
- Instrument clip-on system – cardioid condenser microphone tuned for violin, with flexible gooseneck for precise positioning.
- Wide frequency response – 50 Hz to 18 kHz with ultralow noise floor and high SPL handling for detailed, natural sound.
- All-in-one kit – includes violin mounting clip with soft rubber padding, integrated XLR cable, phantom power converter and rugged carry case.
- Stage-ready mobility – long XLR lead lets you move freely while keeping a solid connection to your mixer or audio interface.
- Product is on order
Whether you're amplifying your violin for live concerts, band rehearsals or studio sessions, the CB100 VIOLIN gives you an affordable, easy‑to‑use and great‑sounding clip‑on solution that fits neatly into your gig bag.
1 piece
€49,00
Price per piece: 49,00 €
Downloads:
Product information : ProductName Product information (.pdf)
Quick start guide : ProductName Quick start guide (.pdf)
Specifications
Specifications – Behringer CB100 VIOLIN
Microphone
| Transducer type | Condenser (clip-on instrument microphone) |
| Polar pattern | Cardioid |
| Frequency response | 50 Hz – 18 kHz |
| Sensitivity | ‑50 dB ±3 dB @ 1 kHz (1 V/Pa) |
| Impedance | 200 Ω |
Connections & Power
| Output connector | 3‑pin XLR (integrated cable) |
| Phantom power | Via included converter, approx. 9–52 V (nominal 48 V) |
Physical
| Mounting | Violin clip with soft rubber padding |
| Weight (mic without clamp) | Approx. 140 g |
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
1 piece
€25 490,00
1 piece
€25 490,00
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
Brand:
MidasDescription:
Midas Heritage‑D HD96‑AIR‑CC‑IP – Live Digital Console
144 channels, 123 mix buses, 96 kHz in a portable frame
144 kanalit, 123 mix‑bussi ja 96 kHz kompaktses korpuses
The HD96‑AIR‑CC‑IP brings the full power of the Heritage‑D engine into a lightweight live console. You get up to 144 input channels, 123 mix buses and a 96 kHz mix engine, all controlled via a 21″ glare‑resistant multi‑touch display with gesture support.
Local I/O provides 8 × XLR mic/line inputs and 8 × XLR outputs, each reconfigurable as AES3, plus HyperMAC and AES50 ports for connecting stageboxes and networked I/O. Under the hood you have the same DSP class as HD96‑24: deep processing, powerful FX, and time‑aligned, phase‑coherent mix architecture in a console that weighs only around 16.7 kg.
With 24 VCAs, 24 POPulation groups, up to 24 multi‑channel FX engines plus extensive dynamic EQ and multi‑band compression, HD96‑AIR is designed for tour sound, rentals and high‑end installs that need HD‑class power in a compact footprint.
Product is on order>Product is in stock>Product is on order>1 piece
€25 490,00
Monthly payment from: 722,00 €
Downloads:
Product information : ProductName Product information (.pdf)
Quick start guide : ProductName Quick start guide (.pdf)
Specifications
Specifications
Mix Engine & Capacity
| Type | Live digital console (Heritage‑D HD96‑AIR series) |
| Input Channels | Up to 144 input channels |
| Mix Buses | 123 time‑aligned, phase‑coherent mix buses |
| Sample Rate | 96 kHz |
Control Surface
| Screen | 21" glare‑resistant multi‑touch TFT display |
| Faders | 3 × 100 mm motorized faders (Midas PRO) |
| Control Groups | 24 VCAs, 24 POPulation Groups |
Local I/O & Networking
| Local Inputs | 8 × XLR (analog mic/line or AES3, switchable) |
| Local Outputs | 8 × XLR (analog line or AES3, switchable) |
| Network Audio | HyperMAC (copper/optical) and AES50 over etherCON |
| Word Clock | 2 × BNC (In/Out) |
Control & Connectivity
| USB | Multiple USB ports for storage/control (Type‑A) plus service ports |
| Network / HDMI | Ethernet control port; dual HDMI outputs (for external displays) |
| Wireless | Built‑in Wi‑Fi & Bluetooth 5.0 (remote control / connectivity) |
| I/O Expansion | 2 × expansion card slots |
Power & Physical
| Power | Dual‑redundant auto‑ranging PSUs (2 × IEC) |
| Dimensions (W × D × H) | Approx. 465 × 806 × 211 mm (18.3" × 31.7" × 8.3") |
| Weight | Approx. 16.7 kg (36.8 lb) |
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
1 piece
€3 289,00
1 piece
€3 289,00
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
Brand:
MidasDescription:
Midas AS88 – Dual HyperMAC to 8‑Port Dual Redundant AES50 Converter
HyperMAC ↔ AES50 redundancy hub for HD96 systems
The Midas AS88 is a compact, rugged dual HyperMAC to 8‑port dual‑redundant AES50 converter. It bridges the HD96 console’s HyperMAC network to multiple AES50 stageboxes, providing up to 192 bidirectional channels at 96 kHz with full cable and PSU redundancy. :contentReference[oaicite:4]{index=4}
Built around advanced FPGA‑based switching, the AS88 automatically fails over to its redundant HyperMAC path when needed, while connection status LEDs report the state of each snake and power supply at a glance. :contentReference[oaicite:5]{index=5}
Key features
- Dual HyperMAC → 8 AES50 SuperMAC conversion for large HD96 systems.
- Up to 192 bidirectional channels at 96 kHz over networked copper/optical lines.
- Dual redundant, auto‑ranging switch‑mode PSU with 2 × IEC inlets for independent mains feeds.
- 2U rackmount chassis designed for touring and fixed installs alike.
- Neutrik etherCON connectors for AES50/copper snake and opticalCON DUO for fiber HyperMAC.
- Clocking from incoming AES50 or HyperMAC ports, with redundancy status visible on connected HD96 consoles.
- Product is on order
Whether you’re building a high‑channel‑count Heritage‑D HD96‑24 or HD96‑AIR rig, the AS88 is the central patch box that keeps your HyperMAC and AES50 worlds connected and fully redundant.
1 piece
€3 289,00
Monthly payment from: 94,00 €
Specifications
Specifications
System & Conversion
| Type | Dual HyperMAC to 8‑port dual‑redundant AES50 converter |
| Conversion | HyperMAC / AES50 converter, 2 In / 16 Out (dual redundancy) |
| Max Channels | Up to 192 bidirectional channels @ 96 kHz |
| Sample Rate | 96 kHz |
Connectors & I/O
| HyperMAC (optical) | 2 × dual‑fibre Neutrik opticalCON DUO connectors (rear) |
| HyperMAC (copper) | 2 × Neutrik etherCON (rear) |
| AES50 Outputs | 16 × Neutrik etherCON RJ45 sockets (rear) |
| Ethernet | 1 × RJ45 (rear) |
| Status Indicators | 2 × 20‑character LCD; LED status for Snake X/Y, PSUs, AES50 lines and Ethernet |
Power
| Power Supply | Dual redundant auto‑ranging switch‑mode PSU |
| AC Input | 100–240 VAC, 50/60 Hz, 2 × IEC C13 inlets |
| Power Consumption | 25 W (max) |
Physical
| Form Factor | 2U, 19″ rackmount chassis |
| Dimensions (W × D × H) | 48.29 × 43.99 × 8.79 cm (19.01 × 17.32 × 3.46″) |
| Weight | 6.59 kg (14.53 lb) |
| Colour | Black |
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
1 piece
€1 979,00
1 piece
€1 979,00
Midas HD96‑FB16 – 16‑Channel Fader Bay for HD Series
Brand:
MidasDescription:
Midas HD96‑FB16 – 16‑Channel Fader Bay
Portable control surface for HD Series consoles
The HD96‑FB16 adds hands‑on control to your HD96 setup with 16 motorised 100 mm faders, Mute and Select buttons per strip, and ultra‑clear 24×240 LCD channel displays for fast identification and navigation.
- HD Series integration via USB; expand your surface and streamline your workflow.
- Scale up to four FB16s for large shows and 64+ physical faders.
- Compact & road‑friendly: 97 × 476 × 269 mm; 4.3 kg.
- Product is on order
Compatible with HD96‑AIR and HD96‑24 consoles (HD Series).
1 piece
€1 979,00
Monthly payment from: 56,00 €
Specifications
| Type | Portable fader bay for HD Series consoles |
| Control Strips | 16 channels |
| Faders | 16 × motorised 100 mm (Midas PRO) |
| Per‑Channel Display | 16 × 24×240 LCD |
| Channel Buttons | Mute, Select (per strip) |
| Connectivity | USB to HD96‑AIR / HD96‑24 |
| Expansion | Use up to 4 FB16 units |
| Dimensions (H × W × D) | 97 × 476 × 269 mm (3.84 × 18.75 × 10.6") |
| Weight | 4.3 kg (9.5 lb) |
Midas COBALT
Brand:
MidasDescription:
Midas COBALT HyperMAC‑to‑USB3 Converter
192‑Channel Recording & Playback on macOS – Compact, Rugged, Redundant
Midas COBALT bridges your computer and any HyperMAC audio network, delivering up to 192 bidirectional channels at 48 kHz or 96 kHz with zero compromise in audio quality. Its dual RJ45 ports provide automatic redundancy, while the USB‑C 3.0 connection (bus‑powered and locking) ensures rock‑solid stability in demanding live or studio environments.
Sync‑status LEDs offer instant diagnostics, and the blue brushed‑aluminum chassis slips easily into a backpack or the included carry case. Whether you’re capturing large‑format concerts or feeding virtual sound‑check sessions, COBALT gives you uncompromising Midas performance in the palm of your hand.
Key Features:
- Up to 192 × 192 channels via HyperMAC and USB‑C
- Switchable 48 kHz / 96 kHz sample‑rate conversion
- Dual redundant HyperMAC ports for seamless backup
- USB‑C bus‑powered; no external PSU required
- Locking USB‑C and RJ45 connectors for touring security
- Compact 45.8 × 141.2 × 83.8 mm, only 343 g
- Product is in stock
Order Midas COBALT today and experience effortless, high‑channel‑count recording and playback wherever your next gig takes you.
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Quick start guide : Midas Cobalt Quick start guide (.pdf)
Specifications
Specifications
| SKU / Model Code | 0606‑ADY |
| EAN | TBD |
| USB | 1 × USB 3.0 Type‑C (locking, bus‑powered) |
| HyperMAC I/O | 2 × RJ45 (dual redundant) |
| Sample Rates | 48 kHz / 96 kHz (switchable) |
| Bit Depth | 24‑bit |
| Power | USB bus‑powered (no external PSU) |
| Dimensions (H × W × D) | 45.78 × 141.24 × 83.82 mm / 1.8 × 5.56 × 3.3 in |
| Weight | 0.344 kg / 12.1 oz |
| Included | Carry case, USB‑C cable |
| Compatibility | macOS (CoreAudio), major DAWs |
Midas DL8
Brand:
MidasDescription:
Midas DL8 Stagebox
Advanced Connectivity for Every Need
The Midas DL8 is a professional 8-channel stage box that offers flexible connectivity and reliability for both stage and permanent installations. Equipped with Midas PRO microphone preamps, the DL8 ensures exceptional audio quality. Beyond its analog inputs and outputs, the DL8's ULTRANET and AES50 SuperMAC interfaces provide seamless integration for personal monitoring and large audio systems.
Key Features:
- 8 Midas PRO microphone preamps with +48 V phantom power
- 8 balanced XLR outputs for reliable connections
- ULTRANET distribution hub, ideal for Behringer P16-M personal monitors
- AES50 SuperMAC ports for cascading additional stageboxes
- Rugged chassis, perfect for both stage and installation use
- Neutrik etherCON ports with CAT5e remote operation up to 100 meters
- Product is on order
Don't miss out! Order the Midas DL8 stagebox from Heliart Webshop today and elevate your audio systems to the next level!
1 piece
€599,00
Monthly payment from: 17,00 €
Downloads:
Quick start guide : Midas DL8 Quick start guide (.pdf)
Specifications
| Signal Processing | 24-bit @ 44.1 / 48 kHz, 114 dB dynamic range (A-weighted) |
| I/O Latency | 1.1 ms |
| Connectivity | - 8 programmable Midas microphone preamps - 8 balanced XLR outputs - 2 ULTRANET outputs, RJ45 - 2 AES50 ports, NEUTRIK etherCON - 1 USB port for system updates, type B |
| Microphone Input Characteristics | - Microphone input impedance: 5 kΩ / 10 kΩ - Phantom power: +48 V, switchable per input - THD + noise: < 0.006%, unweighted - Equivalent input noise level: -125 dBu |
| Input/Output Characteristics | - Frequency response: 10 Hz - 22 kHz - Dynamic range: 106 dB - A/D converter: 109 dB - Crosstalk: 100 dB |
| Digital Input/Output | - AES50 SuperMAC: 2 x 48 channels, bidirectional - ULTRANET: 2 outputs - ULTRANET cable length: up to 75 m, CAT5 |
Midas AS80
Brand:
MidasDescription:
- Midas AS80 Single HyperMac to dual HMAC converter for running dual redundant 1 GBit connections
- Up to 192 bidirectional channels at 96 kHz
- Dual redundant auto-ranging universal switch-mode power supply
- Compact and rugged design
- 1U rackmountable design
- Clocked from incoming HMAC ports
- Connection redundancy status available from connected console indicating cable state
- Neutrik etherCON * connectors used for AES50 ports and copper snake connection
- Dual-fibre Neutrik opticalCON DUO * connector used for optical fibre snake connection
- Product is on order
1 piece
€2 048,00
Monthly payment from: 58,00 €
Downloads:
Quick start guide : Midas AS80 Quick start guide (.pdf)
Specifications
Dimensions : 44 x 483 x 436 mm
Weight : 5,1kg
Behringer XM8500
Brand:
BehringerDescription:
- Behringer XM8500 Dynamic cardioid vocal microphone
- Dynamic vocal microphone with smooth mid-frequency presence rise for excellent voice projection
- Ultra-wide frequency response for brilliant and transparent sound
- Extremely high signal output lets your voice cut through
- Cardioid characteristic minimizes background noise and feedback
- Shock mount system to cut down handling noise
- Integrated spherical wind and pop noise filter
- Microphone stand adapter and impact-resistant carrying case included
- Product is on order
1 piece
€26,00
Price per piece: 26,00 €
Downloads:
Spec sheet : Behringer XM8500 spec sheet (.pdf)
Specifications
Bandwith: 50Hz - 15kHz
Weight : 0,24kg
TC Helicon Go XLR MIC
TC Helicon Go XLR MIC
1 piece
€119,00
1 piece
€119,00
TC Helicon Go XLR MIC
Brand:
TC HeliconDescription:
- TC Helicon GoXLR MIC Professional Broadcast Microphone
The GoXLR MIC is a streaming enthusiast’s dream come true! With ultra-low-noise design, this professional-quality dynamic microphone is an excellent choice for any broadcasting scenario. The GoXLR MIC provides incredible high-quality performance and is rugged enough to go the distance with a heavy-duty multi-adjustable mount - Universally Adjustable
GoXLR MIC is designed for perfect positioning via a 3-dimensional adjustment mechanism.
Dual articulation locking joints allow precise control for fine-tuning the position of your mic for any setup. The sliding pop filter height is adjustable via an accessible thumb screw. - Why the GoXLR MIC?
GoXLR MIC doesn’t just look great; it’s a powerful recording tool with an almost flat 50 Hz to 18 kHz frequency response, a highly directional super-cardioid polar pattern, and a high-quality transducer and gold plated XLR output. - Accent Rings
Customize your streaming rig by swapping out the silver anodized ring with one of 9 colored accent rings. Replace the ring color to match your mood, or your streaming room color-scheme. Replacement is very simple – first remove the pop filter, then unscrew the nut from the base of the mic to swap the ring - Product is in stock
1 piece
€119,00
Price per piece: 119,00 €
Downloads:
Quick start guide : GoXLR Mic Quick start guide (.pdf)
Specifications
Type: Super-Cardioid
Dynamic Microphone
Frequency response: 50 Hz to 18 kHz
Impedance: 300 Ohms
Connector: Gold-Plated XLR
Sensitivity: -74 db
Weight: 485 g
Shure WL185 lavalier microphone
Shure WL185 lavalier microphone
1 piece
€175,00
1 piece
€175,00
Shure WL185 lavalier microphone
Brand:
ShureDescription:
- Shure WL185 Cardioid TQG Lavalier Microphone
- Suitable for Shure bodypack
- Product is in stock
1 piece
€175,00
Price per piece: 175,00 €
Specifications
Type: Condenser (electret bias)
Frequency Response: 50 to 17,000 Hz
Output Impedance: 1800 Ω
Sensitivity [1]: WL185 -45.5 dBV/Pa
Maximum SPL: WL185 130.5 dB SPL
Self Noise (A-Weighted): WL185 28.0 dB SPL
Dynamic Range: 102.5 dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter
Midas DN4816-I
Brand:
MidasDescription:
- Midas DN4816-I Bus-Powered StageCONNECT Interface with 16 Analog Inputs and Dual Ultranet Outputs
- Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
- Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is available for preorder
1 piece
€319,00
Price per piece: 319,00 €
Downloads:
Quick start guide : Midas DN4816-I Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Midas DN4816-O
Brand:
MidasDescription:
- Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
- Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
- Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is in stock
1 piece
€339,00
Price per piece: 339,00 €
Downloads:
Quick start guide : Midas DN4816-O Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Spec sheet and quick start guide
Mõõdud : 483 x 169 x 49mm
Kaal : 2,2kg
KLARK TEKNIK DN4816U
Brand:
Klark TeknikDescription:
- KLARK TEKNIK DN4816U Bus-Powered StageCONNECT Interface Bridge with Multi-Channel USB I/O and Behringer Ultranet I/O
- DI Box sized interface for connecting StageConnect devices to Behringer Ultranet systems and USB multi-channel audio
- StageConnect 32-channel audio transmission at sub-milisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz, using standard XLR microphone or DMX cable
- Asynchronous 32-channel sample rate conversion allows connecting different clock domains and sample rates with 0.4 ms latency and 140 dB dynamic range
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master and Slave ports allow exchanging multi-channel audio with a chain of other StageConnect devices
- Can be used for sending StageConnect or USB signals to P16 personal monitoring mixers or Turbosound iQ speakers Behringer Ultranet signals can be converted to StageConnect or USB streams
- Slave mode for use with StageConnect enabled mixing consoles, stageboxes and hubs
- External power supply for stand-alone use and offering remote power on the StageConnect Master output
- Product is on order
1 piece
€204,00
Price per piece: 204,00 €
Downloads:
Quick start guide : KLARK TEKNIK DN4816U Quick start guide (.pdf)
Specifications
Dimensions : 118 x 112 x 63mm
Weight : 0,71kg
Midas DN4888
Brand:
MidasDescription:
- Midas DN4888 Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
- Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
- StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
- Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
- Flexible connectivity on stage and between side racks using any balanced microphone cable
- Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
- Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
- Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
- Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
- External power supply for standalone use and offering remote power on the StageConnect Master output
- Product is on order
1 piece
€369,00
Price per piece: 369,00 €
Downloads:
Quick start guide : Midas DN4888 Quick start guide (.pdf)
Specifications
Dimensions : 483 x 169 x 49mm
Weight : 2,2kg
Midas Heritage-D HD96-24 TP
Midas Heritage-D HD96-24 TP
1 piece
€39 500,00
1 piece
€39 500,00
Midas Heritage-D HD96-24 TP
Brand:
MidasDescription:
- Midas Heritage-D HD-96-TP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
- 120 time-aligned and phase-coherent mix buses
- 21" full colour TFT display screen with capacitive touch sensing
- Advanced and multi-gesture touchscreen user interface
- Award-winning Midas microphone preamplifiers
- HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
- Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
- 24 VCA (variable control association) groups, and unlimited POPulation groups
- Up to 24 multi-channel digital signal processing effects engines
- Integrated Wireless transceiver module
- Dual ULTRANET Ports providing 32 additional digital outputs
- 28 Midas PRO motorised 100 mm faders
- Fully interpolated touch sensitive controls
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€39 500,00
Monthly payment from: 1 118,00 €
Downloads:
Product manual : Midas Heritage-D HD-96 manual (.pdf)
Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)
Specifications
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg
Midas Heritage-D HD96-24 IP
Midas Heritage-D HD96-24 IP
1 piece
€37 500,00
1 piece
€37 500,00
Midas Heritage-D HD96-24 IP
Brand:
MidasDescription:
- Midas Heritage-D HD-96-IP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
- 120 time-aligned and phase-coherent mix buses
- 21" full colour TFT display screen with capacitive touch sensing
- Advanced and multi-gesture touchscreen user interface
- Award-winning Midas microphone preamplifiers
- HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
- Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
- 24 VCA (variable control association) groups, and unlimited POPulation groups
- Up to 24 multi-channel digital signal processing effects engines
- Integrated Wireless transceiver module
- Dual ULTRANET Ports providing 32 additional digital outputs
- 28 Midas PRO motorised 100 mm faders
- Fully interpolated touch sensitive controls
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€37 500,00
Monthly payment from: 1 061,00 €
Downloads:
Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)
Specifications
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg
Midas DL231
Brand:
MidasDescription:
- Midas DL231 has 2 award-winning Midas microphone preamplifiers per input with switchable +48 V phantom power
- 2 dual redundant AES50 network ports with independent phase-locked loop synchronisation
- 24 electronically balanced output channels can be sourced from microphone preamplifiers or AES50 ports
- Remote operation up to 100 m via CAT5/5e cable
- Selectable 96 kHz or 48 kHz sample rate operation
- All settings programmable from front panel controls or console
- PSU status indicator LEDs and configuration LCD display on front panel
- MIDI In, Out and Thru connectors
- Features Neutrik etherCON* AES50 network ports
- Rugged 5U rackmount chassis for durability in portable applications
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€4 990,00
Monthly payment from: 142,00 €
Downloads:
Quick start guide : Midas DL231 Quick start guide (.pdf)
Specifications
Dimensions : 5U 410mm deep
Weight : 15kg
Behringer BC1500
Brand:
BehringerDescription:
- Behringer BC1500 High-performance set of 7 microphones tuned and matched to capture every nuance of a full drum kit
- Complete collection of premium drum microphones, ideal for studio recordings and live performances
- 1 premium large diaphragm dynamic microphone specially designed for bass drum and low frequency instruments
- 4 dynamic percussion microphones for snare, toms and other acoustic percussive instruments
- 2 matched condenser microphones for overhead stereo drum imaging with switchable low-frequency roll-off
- Cardioid polar pattern for outstanding sound source separation
- Rugged, reliable metal die-cast body construction
- Compact and versatile microphones make it suitable for precision and close mic recordings
- Gold-plated 3-pin XLR output connector for highest signal integrity
- Microphone clamps, 5/8” threaded adapters, windscreen and aluminum carry case included
- Product is on order
1 piece
€186,00
Price per piece: 186,00 €
Specifications
| Tom mic | Bass Drum mic | Cymbal mic | |
| Type | Dynamic | Dynamic | Condenser |
| Polar pattern | Uni-directional | Uni-directional | Cardioid |
| Frequency response | 50 Hz - 14 kHz | 50 Hz - 14 kHz | 50 Hz - 18 kHz |
| Sensitivity | -55 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa | -52 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/P | -42 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa |
| Power supply | N/A | N/A | 9-52 V phantom power |
| Max. SPL | 145 dB @ 1 kHz ≤1% THD | 150 dB @ 1 kHz ≤1% THD | 136 dB @ 1 kHz ≤1% THD |
| S/N ratio | 75 dB | 79 dB | 70dB |
Behringer BO440
Brand:
BehringerDescription:
- Behringer BO440 Professional head-worn condenser microphone for a natural and accurate voice reproduction
- Ideal as main and support microphone for studio recordings, live performances, houses of worship, fitness and theaters
- Excellent choice for broadcasters, presenters, lecturers, singers, musicians, actors and performers requiring hands-free microphones
- Optimized frequency response especially for body pack transmitters
- Omni-directional polar pattern for a warm and balanced sonic quality with low proximity effect
- Rugged, reliable, low-profile and lightweight metal construction for concealed-mic performances
- Gold-plated 3-pin mini XLR output connector for highest signal integrity
- Integrated ear hooks for comfortable and nearly invisible fit
- Adjustable boom length for flexible positioning
- Integrated 4 feet (1.2 m) cable with mini XLR connector
- Discrete windscreen and cable clip included
- Product is in stock
1 piece
€45,00
Price per piece: 45,00 €
Specifications
Specifications
Capsule type: Condenser
Polar pattern: Omnidirectional
Frequency response: 20 Hz to 18 kHz
Sensitivity: -50 dB (0 dB = 1/u Pa @ 1 KHz)
Impedance: 1.2 kΩ
Max operating voltage: 9 V DC
Standard operating voltage: 3 V DC (RL: 2.2 kΩ)
Power consumption: 0.5 mA
Cable length: 1.2 m (4 ft)
Connector: Mini 3-pin XLR
Net weight: 19.5 g (0.68 oz)
Behringer BD440
Brand:
BehringerDescription:
- Behringer BD440 Professional head-worn condenser microphone for focused and transparent voice reproduction
- Ideal as main and support microphone for studio recordings, live performances, houses of worship, fitness and theaters
- Excellent choice for broadcasters, presenters, lecturers, singers, musicians, actors and performers requiring hands-free microphones
- Optimized frequency response especially for body pack transmitters
- Cardioid polar pattern for outstanding sound source separation and off-axis rejection
- Rugged, reliable, low-profile and lightweight metal construction for concealed-mic performances
- Gold-plated 3-pin mini XLR output connector for highest signal integrity
- Integrated ear hooks for comfortable and nearly invisible fit
- Adjustable boom length for flexible positioning
- Integrated 4 feet (1.2 m) cable with mini XLR connector
- Discrete windscreen and cable clip included
- Product is in stock
1 piece
€45,00
Price per piece: 45,00 €
Downloads:
Quick start guide : Behringer BD440 Quick start guide (.pdf)
Specifications
Specifications
Capsule type: Condenser
Polar pattern: Unidirectional
Frequency response: 80 Hz to 16 kHz
Sensitivity: -46 dB (0 dB = 1/u Pa @ 1 KHz)
Impedance: 1.2 kΩ
Max operating voltage: 9 V DC
Standard operating voltage: 3 V DC (RL: 2.2 kΩ)
Power consumption: 0.5 mA
Cable length: 1.2 m (4 ft)
Connector Mini: 3-pin XLR
Net weight: 20 g (0.7 oz)
TC Helicon MP-85
Brand:
TC HeliconDescription:
- TC Helicon MP-85 Lismer 2 capsule optimized for TC Helicon harmony processing provides transparent vocal tone, especially for high-power female vocalists
- Exceptional dynamic performance microphone with Mic Control, balanced vocal tone and superb noise/feedback rejection
- Mic Control user-configurable button lets you control studio quality TC Helicon vocal effects from anywhere on stage
- Exceptional vocal signal isolation and off-axis feedback suppression
- Powered by a standard mic cable from your TC Helicon vocal processor
- Extra-durable hardened steel wire mesh grill
- Integrated pop filter and dual-suspended shock mount for a studio performance sound
- Super-cardioid pick-up pattern optimized for close mic technique
- Mic clip includes both US and EU threading
- Included carrying case designed to hug mic closely for optimal shock protection
- Mic Control compatible with most TC Helicon voice processing products
- Product is in stock
1 piece
€77,00
Price per piece: 77,00 €
Downloads:
Quick start guide : TC Helicon MP-85 Product information (.pdf)
Specifications
Dimension : 185 x 54 mm
Weight : 0,36kg
Behringer BU100
Brand:
BehringerDescription:
- Behringer BU100 Studio-grade USB boundary microphone for transparent vocal projections
- Ideal for streamers, podcasters, gamers, recording and conference calls
- Cardioid polar pattern minimizes background noise and feedback
- “Plug and play” for easy setup on your desktop computer, laptop and other USB-enabled audio devices
- Exceptional frequency response with high-resolution audio, perfect for voice and acoustic instruments
- Integrated noise-reducing circuit for high signal-to-noise ratio
- Zero-latency direct monitoring port for speakers or headphones
- Convenient mute button with status indicator LED
- Peg holes for optional wall mounting
- Rugged reliable metal construction
- High-quality USB cable included
- Product is in stock
1 piece
€54,00
Price per piece: 54,00 €
Downloads:
Quick start guide : Behringer BU100 Quick start guide (.pdf)
Specifications
Type: Electret Condenser
Frequency response: 50 Hz to 18 kHz
A/D converter: 16 bit, 48 kHz
maxMax SPL: 110 dB
S/N ratio: 55 dB
USB interface: USB 2.0
Suitable OS: Windows 7/8/10 or Mac OS 9/X
Polar pattern: Semi-cardioid
Sensitivity: 3.2 mV / Pa @ 1 kHz
Power supply: 5 V via USB
Sennheiser e604 3Pack
Sennheiser e604 3Pack
1 piece
€375,00
1 piece
€375,00
Sennheiser e604 3Pack
Brand:
SennheiserDescription:
- Sennheiser e604 compact dynamic microphone set
- Rugged reinforced glass-fibre body
- Low sensitivity to impact and handling noise
- Very high sound pressure handling capability
- Low distortion microphone
- Hum compensating coil
- Easy to position due to compact design
- Integral stand mount
- Product is on order
1 piece
€375,00
Price per piece: 375,00 €
Specifications
Dimensions Ø 33 x 59 mm
Connector XLR-3
Frequency response (Microphone) 40 - 18000 Hz
Weight Without cable: 60 g
Sensitivity in free field, no load (1kHz) 1,8 mV/Pa
Nominal impedance 350 Ω
Min. terminating impedance 1000 Ω
Weight w/o cable 60 g
Midas M32R Live
Brand:
MidasDescription:
- Midas M32R LIVE Live performance and studio recording digital console with up to 40 simultaneous input channels
- 16 award-winning Midas PRO microphone preamplifiers
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- 32 bi-directional channels of live recording/playback on dual SD/SDHC (cards not included)
- Up to 3 hours of 32 channel PCM recording in one session - stored as uncompressed WAV files
- High-performance aluminium and high-impact steel structure
- Rack mount brackets included for ultimate flexibility
- 40 bit floating point digital signal processing
- 8 DCA and 6 mute groups
- 8 digital signal processing effects engines
- 17 Midas PRO motor faders
- Daylight viewable 5” full colour TFT display screen
- 32 x 32 channel USB 2.0 audio interface
- DAW remote control emulations of Mackie Control* and HUI* protocols
- Optional wireless remote control with Midas Apps for iPhone* and iPad*
- Auto-ranging universal switch-mode power supply
- Product is in stock
1 piece
€2 049,00
Monthly payment from: 58,00 €
Downloads:
Product information: Midas M32R Live Product information (.pdf)
Quick start guide: Midas M32R Live Quick start guide (.pdf)
Specifications
Dimensions : 478 x 617 x 208mm
Weight: 14,3kg
Shure SM57
Brand:
ShureDescription:
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
- Product is on order
1 piece
€119,00
Price per piece: 119,00 €
SHURE MV7
Brand:
ShureDescription:
- Shure MV7 is a professional-quality USB dynamic microphone
- Ideal for close mic applications that require vocal intelligibility with a balanced tone
- The attractive and durable all-metal design features an adjustable yoke that can be mounted onto a variety of microphone stands for flexible placement options
- A touch panel user interface provides control of microphone gain, headphone level, monitor mix blend and muting
- Compatible with Windows and Mac computers
- Also compatible with iOS and Android devices with applicable cables. (Cables not provided.)
- Highly directional cardioid pattern isolates your voice and removes unwanted background noise
- Hybrid USB/cardioid microphone can be used for digital or analog recording
- Auto Level Mode Automatically adjusts microphone settings to take the guesswork out of gain and compression settings
- Switchable EQ filters High-pass filter and voice boost emphasis (presence boost) options in Manual mode
- Product is on order
1 piece
€255,00
Price per piece: 255,00 €
SHURE MV88+ VIDEOGRAPHY Kit
SHURE MV88+ VIDEOGRAPHY Kit
1 piece
€319,00
1 piece
€319,00
SHURE MV88+ VIDEOGRAPHY Kit
Brand:
ShureDescription:
- Shure MV88+ Video kit digital stereo condenser mic
- Integrated headphone output for real-time monitoring
- Includes industry leading Manfrotto PIXI mini tripod, phone clamp & shoe-mount, USB-C & lightning cables
- Includes neoprene roll-up bag to keep all your accessories in one place
- Built-In Headphone Output for real-time monitoring
- Pristine audio for multiple set ups
- Included phone mount is also compatible with any tripod with a ¼” connector
- All metal construction
- Detailed stereo capture, five DSP preset modes
- Shure MOTIV Audio App for pro-level recording
- Shure MOTIV Video for onscreen control
- Allows for phone charging while mic is in use (requires USB-A cable and Apple USB3 camera adapter)- iOS users only
- Set includes:
- MV88+ Video Kit (includes microphone, Manfrotto® PIXI tripod, phone clamp and mount, iOS and USB-C cables)
- AMV88-FUR Windjammer
- SE215-CL Sound Isolating™ Earphones
- Product is on order
1 piece
€319,00
Price per piece: 319,00 €
Downloads:
User guide: Shure MV88+ Video kit User guide
Specifications
MFi Certified: Yes
DSP Modes (Presets): Speech/Singing/Acoustic/Loud/Flat
Transducer Type: Cardioid (10 mm)/Bidirectional Condenser Cartridge (10 mm)
Polar Pattern: Adjustable Width Stereo/Mono Bidirectional/Mono Cardioid/Mid-Side
Stereo Principle: Mid-Side
Frequency Response: 20 Hz to 20,000 Hz
Adjustable Gain Range: 0 to +36 dB
Sensitivity: -37 dBFS/Pa at 1 kHz [1] [2]
Maximum SPL: 120 dB SPL [2]
Limiter: Yes
Compressor: Yes
Equalizer: 5-band
Power Requirements: Powered through USB or Lightning connector
Housing:All metal construction
System Requirements
System Requirements and Compatibility: iOS
iOS: iOS 12 and higher
iPhone: iPhone 6 and higher
iPod Touch: 6th gen
Note: iPad Pro (USB-C) is not supported.
System Requirements and Compatibility: Android
Will work with any Android device that has:
Android Oreo 8.0 and higher
USB Host Power Requirement of ≥100 mA
USB Audio Class 1.1 support and higher
SHURE MV88+ Video Kit
SHURE MV88+ Video Kit
1 piece
€269,00
1 piece
€269,00
SHURE MV88+ Video Kit
Brand:
ShureDescription:
- Shure MV88+ Video kit digital stereo condenser mic
- Integrated headphone output for real-time monitoring
- Includes industry leading Manfrotto PIXI mini tripod, phone clamp & shoe-mount, USB-C & lightning cables
- Includes neoprene roll-up bag to keep all your accessories in one place
- Built-In Headphone Output for real-time monitoring
- Pristine audio for multiple set ups
- Included phone mount is also compatible with any tripod with a ¼” connector
- All metal construction
- Detailed stereo capture, five DSP preset modes
- Shure MOTIV Audio App for pro-level recording
- Shure MOTIV Video for onscreen control
- Allows for phone charging while mic is in use (requires USB-A cable and Apple USB3 camera adapter)- iOS users only
- Product is on order
1 piece
€269,00
Price per piece: 269,00 €
Downloads:
User guide: Shure MV88+ Video kit User guide
Specifications
MFi Certified: Yes
DSP Modes (Presets): Speech/Singing/Acoustic/Loud/Flat
Transducer Type: Cardioid (10 mm)/Bidirectional Condenser Cartridge (10 mm)
Polar Pattern: Adjustable Width Stereo/Mono Bidirectional/Mono Cardioid/Mid-Side
Stereo Principle: Mid-Side
Frequency Response: 20 Hz to 20,000 Hz
Adjustable Gain Range: 0 to +36 dB
Sensitivity: -37 dBFS/Pa at 1 kHz [1] [2]
Maximum SPL: 120 dB SPL [2]
Limiter: Yes
Compressor: Yes
Equalizer: 5-band
Power Requirements: Powered through USB or Lightning connector
Housing:All metal construction
Dimensions: 27mm x 27mm x 77mm
Weight: 79g
System Requirements
System Requirements and Compatibility: iOS
iOS: iOS 12 and higher
iPhone: iPhone 6 and higher
iPod Touch: 6th gen
Note: iPad Pro (USB-C) is not supported.
System Requirements and Compatibility: Android
Will work with any Android device that has:
Android Oreo 8.0 and higher
USB Host Power Requirement of ≥100 mA
USB Audio Class 1.1 support and higher
Livestar TIK USB mic
Brand:
LiveStarDescription:
- Compatable with laptop and pc, great choice for recording music, online videos, live streaming and vlogging
- Capsule type: Condenser
- Polar pattern: Supercardioid
- Sampling rate: 44.1 kHzBit rate: 16bit
- Headphone output
- Impedance: 16Ω
- Output power: 125mW
- Product is in stock
1 piece
€29,00
Price per piece: 29,00 €
Downloads:
Product information : ProductName Product information (.pdf)
Quick start guide : ProductName Quick start guide (.pdf)
Specifications
THD:
Frequency response: 20-20000Hz
S/N Rate: ≥ 85dB
Spec sheet and quick start guide
Store in a dry and cool place.
Store in a dry and cool place, after opening in the refrigerator.
Store in a dry, cool and dark place.
Store at room temperature.