Webshop support
Call us: +372 5668 1714

36 products

Behringer RX1602 V2

Behringer RX1602 V2

Brand:

Behringer

Description:

  • Behringer RX1602 V2 Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
  • 16 balanced high-headroom line inputs for individual stereo or mono use of each section
  • Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
  • Dedicated balance and level controls plus +4/-10 level selection per channel
  • Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
  • Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
  • Monitor/FX signal assignable to phones output for added flexibility
  • Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
  • 1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
  • High-quality detented rotary controls for long-term reliability
  • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
  • Product is in stock

1 piece

€138,00

Price per piece: 138,00 €

Downloads:


Quick start guide : Behringer RX1602 V2 Quick start guide (.pdf)

Specifications

Dimensions : 44 x 483 x 149 mm

Weight : 1,8kg

Klark Teknik DM TCE-EU

Klark Teknik DM TCE-EU

Brand:

Klark Teknik

Description:

  • Klark Teknik DM TCE-EU 2.3" colour touch screen controller
  • User programmable encoder and button
  • POE powered device
  • Support for multiple pages and controls from DM series devices
  • Single gang EU size
  • Black and white single gang trim plates and encoder knobs included
  • Programmable using DM KONTROL application
  • Product is on order

1 piece

€245,00

Price per piece: 245,00 €

Downloads:


Quick start guide : Klark Teknik DM TCE-EU Quick start guide (.pdf)

Specifications


Dimensions : 86,36 x 86,36 x 53,75mm
Weight : 0,16kg

Klark Teknik CP8000EU

Klark Teknik CP8000EU

Brand:

Klark Teknik

Description:

  • Klark Teknik CP8000EU Wall plate remote control for DM8000
  • Volume control may be assigned to either auxiliary input section or main mix bus
  • Selection of auxiliary inputs 1-6
  • All Illuminated, soft touch controls powered remotely from DM8000
  • Use CAT5/6 or any 5 conductor cable for connection distances up to 300 feet (100 m)
  • Compact, single gang format allows use with low voltage trim rings and most standard depth enclosures
  • Generous space provided for input labeling
  • Discrete appearance matches any decor
  • Product is on order

1 piece

€56,00

Price per piece: 56,00 €

Downloads:


Quick start guide : Klark Teknik CP8000EU Quick start guide (.pdf)

Specifications


Dimensions : 80 x 80 x 36mm
Weight : 0,07kg

Midas Heritage-D HD96-24 IP

Midas Heritage-D HD96-24 IP

Brand:

Midas

Description:

  • Midas Heritage-D HD-96-IP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
  • 120 time-aligned and phase-coherent mix buses
  • 21" full colour TFT display screen with capacitive touch sensing
  • Advanced and multi-gesture touchscreen user interface
  • Award-winning Midas microphone preamplifiers
  • HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
  • Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
  • 24 VCA (variable control association) groups, and unlimited POPulation groups
  • Up to 24 multi-channel digital signal processing effects engines
  • Integrated Wireless transceiver module
  • Dual ULTRANET Ports providing 32 additional digital outputs
  • 28 Midas PRO motorised 100 mm faders
  • Fully interpolated touch sensitive controls
  • Dual redundant auto-ranging universal switch-mode power supplies
  • Product is in stock

Midas HD-96-TP frontMidas HD-96-TP leftMidas HD-96-TP rightMidas Heritage-D HD-96-TP rear

1 piece

€37 500,00

Monthly payment from: 1 061,00 €

Downloads:


Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)

Specifications


Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg

Klark Teknik DF1000

Klark Teknik DF1000

Brand:

Klark Teknik

Description:

  • Klark Teknik DF1000 Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
  • Offers up to 10 dB increase in system gain
  • Instantly detects and stops acoustic feedback. Highly effective with both speech and music
  • Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
  • Two fully independent audio channels to process stereo or separate zone signals
  • Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
  • Front panel control featuring suppression and filter reset buttons
  • Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
  • Auto-ranging universal switch-mode power supply
  • Product is on order

1 piece

€205,00

Price per piece: 205,00 €

Downloads:


Quick start guide : Klark Teknik DF1000 Quick start guide (.pdf)

Specifications


Dimension : 483 x 296 x 50 mm
Weight : 2,9kg

Klark Teknik DM8500

Klark Teknik DM8500

Brand:

Klark Teknik

Description:

  • Klark Teknik DM8500 Networked open architecture digital audio processor
  • 64 x 64 channel, dual-redundant Dante*/AES67 audio transport
  • 10 high-headroom analogue mic/line inputs
  • 6 electronically balanced, low impedance line level outputs
  • 24 channels of freely assignable Acoustic Echo Cancellation
  • 16 channel ULTRANET audio output bus
  • Class-compliant USB connection for integration with soft codec conferencing applications
  • System configuration and control via ethernet
  • Embedded HTML engine to serve custom control pages
  • Integrated control modules for Lab Gruppen D series and Lucia amplifiers
  • Embedded media engine for audio playback and recording
  • RS232 connector for interfacing with 3rd party control systems
  • 6 user-configurable general purpose input output connections (GPIO)
  • Auto-ranging universal power supply
  • Product is on order

1 piece

€2 229,00

Monthly payment from: 64,00 €

Downloads:


Quick start guide : Klark Teknik DM8500 Quick start guide (.pdf)

Specifications


Dimensions : 483 x 293 x 44mm
Weight : 3,6 kg

Lab gruppen FAD602

Lab gruppen FAD602

Brand:

Lab gruppen

Description:

  • Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€435,00

Price per piece: 435,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD1202

Lab gruppen FAD1202

Brand:

Lab gruppen

Description:

  • Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€485,00

Price per piece: 485,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD2402

Lab gruppen FAD2402

Brand:

Lab gruppen

Description:

  • Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€532,00

Monthly payment from: 16,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen CMA1201

Lab gruppen CMA1201

Brand:

Lab gruppen

Description:

  • Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
  • 4 mic/line inputs with individual volume controls
  • Energy efficient design conserves energy and reduces
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • Direct drive, constant power technology for superior audio performance and reliability
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Front panel power control button for direct access
  • Aux output for expansion to additional amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Specifications

Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

 

Lab gruppen CM82

Lab gruppen CM82

Brand:

Lab gruppen

Description:

  • Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
  • 8 mic/line inputs with individual volume controls and output routing
  • Individual front panel master volume and bass/treble controls for each output
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, 19" enclosure with brackets for rack mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 437 x 248 x 44mm
Weight : 2,4kg

Lab gruppen CM41

Lab gruppen CM41

Brand:

Lab gruppen

Description:

  • Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
  • 4 mic/line inputs with individual volume controls
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€272,00

Price per piece: 272,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 299 x 218 x 44mm
Weight : 2,1kg

Lab gruppen E 12:2

Lab gruppen E 12:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€1 479,00

Monthly payment from: 42,00 €

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W

Lab gruppen E 40:4

Lab gruppen E 40:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
    4  x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 790,00

Monthly payment from: 79,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 20:4

Lab gruppen E 20:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 649,00

Monthly payment from: 75,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 10:4

Lab gruppen E 10:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€2 090,00

Monthly payment from: 60,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg

*See spec sheet for details

Lab gruppen E 5:4

Lab gruppen E 5:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 890,00

Monthly payment from: 54,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg

Lab gruppen E 2:2

Lab gruppen E 2:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€899,00

Monthly payment from: 26,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 8:2

Lab gruppen E 8:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 379,00

Monthly payment from: 40,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 4:2

Lab gruppen E 4:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 090,00

Monthly payment from: 31,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Behringer LIVE BUDS

Behringer LIVE BUDS

Brand:

Behringer

Description:

  • Behringer LIVE BUDS High-fidelity true wireless earbuds provide wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
  • Bluetooth 5.0 true wireless technology for exceptional sound quality with up to 33 ft (10 m) of wireless freedom
  • Sound isolating design with a variety of ear plugs to block outside noise for detailed music experience
  • Seamless phone, voice commands, volume and music via touch control
  • Secure in-ear design ensures earphones stability and comfort
  • Splash proof construction (IPX4) is ideal for sports, work out and any outdoor activity that requires pure listening pleasure
  • Up to 3-hours of battery life that can be extended to 12-hours with the integrated battery charging case
  • USB charging cable included
  • Includes silicone earplugs in 3 sizes to ensure perfect fit
  • Product is in stock

1 piece

€25,90

Price per piece: 25,90 €

Downloads:


Quick start guide : Behringer LIVE BUDS Quick start guide (.pdf)

Specifications

Bluetooth version V 5.0
Bluetooth range 10 meters (with no obstacles)
Frequency range 2402 - 2480 MHz
Channel number 79
Max output power CODEC support SBC
Driver unit 6 mm
Impedance 16 Ohm
Frequency response 20 Hz - 20 kHz
SPL 92 dB @1kHz (102 dB peak)
Rated / peak power 3 mW (5 mW peak)
Microphone sensitivity (- 42 dB ± 3 dB) @1kHz, 0dB=1V/Pa
Battery type Rechargeable Lithium battery
Working time Up to 3 hours (+ 9 hours via charging case)
Charging time 2 hours via USB 5 V / 500 mA

Behringer RX1202FX

Behringer RX1202FX

Brand:

Behringer

Description:

  • Behringer RX1202FX Premium ultra-low noise, high headroom analog 3U rack mount mixer
  • 8 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
  • Neo-classic "British" 2-band EQs for warm and musical sound
  • Studio-grade FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Switchable +48 V phantom power for condenser microphones
  • 4 additional balanced high-headroom line inputs
  • CD/Tape inputs assignable to Main mix or Control Room/Phones outputs
  • 2 Aux sends per channel: 1 pre fader for monitoring applications, 1 post fader for internal FX or as external send
  • Separate Control Room, Phones and stereo CD/tape outputs
  • Balanced Main mix outputs with gold-plated XLR connectors
  • Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
  • "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
  • Product is in stock

1 piece

€210,00

Price per piece: 210,00 €

Specifications

Dimensions : 482 x 133 x 150 mm

Weight : 3,04kg

Tannoy LIVE MINI

Tannoy LIVE MINI

Brand:

Tannoy

Description:

  • Tannoy LIVE MINI Enjoy your music on the go, anywhere you go
  • Ultra-compact and mobile speaker that plays where you play
  • Premium transducers for the ultimate listening experience
  • Easy wireless connection to your Bluetooth* device
  • Rechargeable battery provides up to 10 hours of music
  • Innovative bass radiator alignment for extended bass performance
  • Charging cradle serves as a home base for your speaker - charges while you play
  • Wall charger to plug into the cradle or directly into the speaker
  • Auxiliary input allows you to connect to your MP3 player and other audio sources
  • Sleek and elegant design complements any listening environment
  • Tannoy - 90 Years of authentic sound experience

  • Product is in stock

1 piece

€115,00

Price per piece: 115,00 €

Downloads:

Product information : Tannoy LIVE MINI Product information (.pdf)
Quick start guide : Tannoy LIVE MINI Quick start guide (.pdf)

Specifications

Dimensions : 63 x 186 x 65mm

Weight : 0,89kg

Behringer C200

Behringer C200

Brand:

Behringer

Description:

  • Behringer C200 Modular column loudspeaker for portable PA applications and high quality music playback
  • Extremely wide sound dispersion provides consistent sound to the audience and performers
  • 200 Watt power with multi-channel Class-D technology
  • High quality Bluetooth* audio streaming
  • MP3 player included to play audio files via USB sticks and SD/MMC cards
  • LED lighting creates club-style atmosphere
  • Comprehensive remote control included for ultimate flexibility
  • 3 channel mixer with individual gain controls
  • Studio-grade echo adds finishing touch to your sound
  • Intuitive user control interface with LCD display for ease of navigation
  • 8" high excursion low frequency driver for strong sub-bass response
  • 4 x 2.5" drivers with edge wound copper voice coils for extended high frequency reproduction
  • Precision-lock system eliminates speaker cables and stands
  • High impact and lightweight enclosure
  • Integrated protective perforated steel mesh grilles
  • Integral ergonomic carrying handle for ease of portability
  • Product is on order

1 piece

€249,00

Price per piece: 249,00 €

Downloads:

Quick start guide : Behringer C200 Quick start guide (.pdf)

Specifications

Dimensions : 325 x 415 x 1385 mm

Weight : 11,6kg

Behringer C210

Behringer C210

Brand:

Behringer

Description:

  • Behringer C210 Modular column loudspeaker for portable PA applications and high quality music playback
  • Extremely wide sound dispersion provides consistent sound to the audience and performers
  • 200 Watt power with multi-channel Class-D technology
  • High quality Bluetooth* audio streaming
  • MP3 player included to play audio files via USB sticks and SD/MMC cards
  • LED lighting creates club-style atmosphere
  • Comprehensive remote control included for ultimate flexibility
  • 3 channel mixer with individual gain controls
  • Studio-grade echo adds finishing touch to your sound
  • Intuitive user control interface with LCD display for ease of navigation
  • 8" high excursion low frequency driver for strong sub-bass response
  • 4 x 2.75" drivers with edge wound copper voice coils for extended high frequency reproduction
  • Precision-lock system eliminates speaker cables and stands
  • High impact and lightweight enclosure
  • Integrated protective perforated steel mesh grilles
  • Integral ergonomic carrying handle for ease of portability
  • Product is on order

1 piece

€255,00

Price per piece: 255,00 €

Downloads:

Quick start guide : Behringer C210 Quick start guide (.pdf)

Specifications

Dimensions : 330 x 440 x 1385 mm

Weight : 13,9kg

Behringer C210B

Behringer C210B

Brand:

Behringer

Description:

  • Behringer C210B Battery powered column loudspeaker for portable PA applications and high quality music playback
  • Up to 6 hours of battery life at 100% playback power and 10 hours at 50% playback power with integrated Li-Ion battery
  • Integrated charging time of 7 hours up to 80% and 10 hours up to 100% battery levels
  • 160 Watt power with multi-channel Class-D technology
  • High quality Bluetooth* audio streaming
  • LED lighting creates club-style atmosphere
  • 3 channel mixer with individual gain controls
  • Studio-grade echo adds finishing touch to your sound
  • Intuitive user control interface with LCD display for ease of navigation
  • 8" high excursion low frequency driver for strong sub-bass response
  • 4 x 2.75" drivers with edge wound copper voice coils for extended high frequency reproduction
  • Precision-lock system eliminates speaker cables and stands
  • High impact and lightweight enclosure
  • Integrated protective perforated steel mesh grilles
  • Integral ergonomic carrying handle for ease of portability
  • Product is on order

1 piece

€335,00

Price per piece: 335,00 €

Downloads:

Quick start guide : Behringer C210B Quick start guide (.pdf)

Specifications

Dimensions : 330 x 440 x 1385 mm

Weight : 15,8kg

Pioneer DM-40BT

Pioneer DM-40BT

Brand:

Pioneer

Description:

  • Create a versatile home set-up that can deliver a rich, balanced sound for producing and DJing. These compact desktop speakers have been designed using professional speaker technology and effortlessly connect to all your Bluetooth® wireless devices.
    The DM-40BT comes in black or white and retains its Groove Technology from the highly-reputed DM-40 active monitor speakers. Expect a smooth bass response, a wide sweet spot enabled by DECO technology, clear audio quality and rich bass sound all at the same time.
    The DM-40BT speakers are sold as a pair.
  • Bluetooth® connection
        Bluetooth® technology allows you to play tracks from smartphones and tablets wirelessly, while Qualcomm® aptX™ and AAC support lets you enjoy even higher quality sound reproduction.
  • Front-loaded bass reflex system
        4-inch fiberglass woofers output a strong, punchy bass from the front, while grooves on the ducts reduce air friction. This way you'll feel a tight bass kick even when the monitors are positioned against the wall.
  • 3D stereo sound
        The DM-40BT's ¾-inch soft dome tweeters are fitted with DECO convex diffusers that channel high frequencies in every direction. This delivers a wide sweet spot and 3D stereo sound wherever you sit or stand.
  • Time alignment
        Class AB amplifiers deliver a crisp sound with low-distortion. Plus the tweeter and woofer are perfectly aligned to eliminate crossover and ensure a well-balanced response across the frequencies.
  • Smart design
        The cabinets' curved front edges provide maximum rigidity and minimum resonance for a clean sound at all volumes - and they'll look good in your home set-up.
  • Product is in stock

1 piece

€199,00

Price per piece: 199,00 €

Specifications

Main Features
Type:    2-way bass reflex, active monitor speakers
Tweeter:    ¾-inch Soft Dome
Woofer:    4-inch Fiberglass
What's in the box
    DM-40BT x 2
    Power cord
    2 m speaker cable (for left/right channel connection)
    Audio converter cable (3.5 mm stereo mini plug to RCA)
    Bottom cushion x 8
    Operating instructions
Specifications
Dimensions: 
    Left ch: 146 x 227 x 223 mm
    Right ch: 146 x 227 x 210 mm
Weight:
    Left ch: 2.7 kg
    Right ch: 2.2 kg
Frequency Range:    70 - 30000 Hz
Amplifier Output:    Class A/B amp: 2 x 21 W / 4 Ω
Impedance:    10 kΩ
Terminals
Inputs: 
    1 LINE (RCA)
    1 LINE (Mini-jack)
Outputs:    1 HEADPHONE MONITOR (Mini-jack)
Bluetooth
Output:    Bluetooth® Specification Class 2
Supported Codec
    SBC, AAC, Qualcomm® aptX™, Qualcomm® aptX™ Low Latency
Version:    Bluetooth® Specification Ver. 4.2

Behringer CE500D

Behringer CE500D

Brand:

Behringer

Description:

  • Behringer CE500D Multi-purpose, 100-Watt, active speaker for commercial sound applications
  • Perfect for restaurants, shops, exhibitions, multimedia, home recording and A/V production
  • Exceptional sound quality, wide dynamic range and ultra-linear frequency range
  • Revolutionary Class-D amplifier technology: enormous power and incredible sonic performance
  • Powerful 5 ½" woofer with extremely light-weight cellulose cone and high-resolution ½" tweeter
  • Ultra-low noise mic/line input with volume control and peak LED
  • Additional line output connector allows linking of additional speaker systems
  • Integrated limiter for ultimate system control and speaker protection
  • Ultra-flexible and heavy-duty wall-mount bracket included
  • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption

  • Product is on order

1 piece

€173,00

Price per piece: 173,00 €

Downloads:

Product information : Behringer CE500D Product information (.pdf)
Quick start guide : Behringer CE500D Quick start guide (.pdf)

Specifications

Dimensions : 320 x 196 x 195mm

Weight : 4,0kg

K&M 24110

K&M 24110

Brand:

K&M

Description:

  • Screw-on wall mount with innovative, patented straddlingbearing-anchors.
  • Suitable for speakers with connectordiameter of 35/37 mm.
  • This mount provides simpleattachment and guaranteed effective clamping of speaker
  • Product is on order

1 piece

€74,00

Price per piece: 74,00 €

Specifications

Adjustment: gradual in 11 settings
Angle of inclination: 0° to 22°
Material: steel
Max. load capacity: 50 kg
Mounting: attaches to walls
Mounting bolt: straddling bearing-anchors diameter 35 to 37 mm x 85 mm
Special features: patented straddling bearing-anchors; guarantee effective clamping of speaker in any position; resonance-optimised construction
Type: black
Wall-to-bolt clearance: 420 mm
Weight: 2.63 kg

Midas M32C TourPro Compact 16

Midas M32C TourPro Compact 16

Brand:

Midas

Description:


Midas M32C

  • Live performance and studio recording digital console with up to 40 simultaneous input channels
  • 25 time-aligned and phase-coherent mix buses
  • AES50 networking allows up to 96 inputs and 96 outputs
  • Midas DL153
  • Midas DL153 16 award-winning Midas microphone preamplifiers with switchable +48 V phantom power
  • 8 electronically balanced low impedance line level outputs
  • Remote operation up to 100 m via CAT5/5e cable
  • Selectable 96 kHz or 48 kHz sample rate operation
  • 0,5m Cat5e cable
  • Product is on order

1 piece

€2 915,00

Monthly payment from: 83,00 €

0