Lab gruppen FAD602

Brand:
Lab gruppenDescription:
- Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€435,00
Price per piece: 435,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD1202

Brand:
Lab gruppenDescription:
- Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€485,00
Price per piece: 485,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD2402
Lab gruppen FAD2402
1 piece
€532,00
1 piece
€532,00
Lab gruppen FAD2402

Brand:
Lab gruppenDescription:
- Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€532,00
Monthly payment from: 16,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen CMA1201

Brand:
Lab gruppenDescription:
- Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
- 4 mic/line inputs with individual volume controls
- Energy efficient design conserves energy and reduces
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Aux output for expansion to additional amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82

Brand:
Lab gruppenDescription:
- Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
- 8 mic/line inputs with individual volume controls and output routing
- Individual front panel master volume and bass/treble controls for each output
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 437 x 248 x 44mm
Weight : 2,4kg
Lab gruppen CM41

Brand:
Lab gruppenDescription:
- Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
- 4 mic/line inputs with individual volume controls
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€272,00
Price per piece: 272,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 299 x 218 x 44mm
Weight : 2,1kg
Lab gruppen IPX1200
Lab gruppen IPX1200
1 piece
€1 180,00
1 piece
€1 180,00
Lab gruppen IPX1200

Brand:
Lab gruppenDescription:
- Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 180,00
Monthly payment from: 34,00 €
Downloads:
Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo 300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg
Lab gruppen IPX2400
Lab gruppen IPX2400
1 piece
€1 496,00
1 piece
€1 496,00
Lab gruppen IPX2400

Brand:
Lab gruppenDescription:
- Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 496,00
Monthly payment from: 43,00 €
Downloads:
Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo 600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg
Lab gruppen E 12:2
Lab gruppen E 12:2
1 piece
€1 479,00
1 piece
€1 479,00
Lab gruppen E 12:2

Brand:
Lab gruppenDescription:
- Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 479,00
Monthly payment from: 42,00 €
Downloads:
Spec sheet : Lab gruppen E 12:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W
Lab gruppen E 40:4
Lab gruppen E 40:4
1 piece
€2 790,00
1 piece
€2 790,00
Lab gruppen E 40:4

Brand:
Lab gruppenDescription:
- Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
4 x 1,000 Watts into Hi-Z 100 V - Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 790,00
Monthly payment from: 79,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 20:4
Lab gruppen E 20:4
1 piece
€2 649,00
1 piece
€2 649,00
Lab gruppen E 20:4

Brand:
Lab gruppenDescription:
- Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 649,00
Monthly payment from: 75,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 10:4
Lab gruppen E 10:4
1 piece
€2 090,00
1 piece
€2 090,00
Lab gruppen E 10:4

Brand:
Lab gruppenDescription:
- Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 090,00
Monthly payment from: 60,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg
*See spec sheet for details
Lab gruppen E 5:4
Lab gruppen E 5:4
1 piece
€1 890,00
1 piece
€1 890,00
Lab gruppen E 5:4

Brand:
Lab gruppenDescription:
- Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 890,00
Monthly payment from: 54,00 €
Downloads:
Spec sheet : Lab gruppen E 5:4 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg
Lab gruppen E 2:2

Brand:
Lab gruppenDescription:
- Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€899,00
Monthly payment from: 26,00 €
Downloads:
Spec sheet : Lab gruppen E 2:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 8:2
Lab gruppen E 8:2
1 piece
€1 379,00
1 piece
€1 379,00
Lab gruppen E 8:2

Brand:
Lab gruppenDescription:
- Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 379,00
Monthly payment from: 40,00 €
Downloads:
Spec sheet : Lab gruppen E 8:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 4:2
Lab gruppen E 4:2
1 piece
€1 090,00
1 piece
€1 090,00
Lab gruppen E 4:2

Brand:
Lab gruppenDescription:
- Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Spec sheet : Lab gruppen E 4:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen PD3000

Brand:
Lab gruppenDescription:
- Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
- Precise power management guarantees performance and efficiency
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Accurate 8-segment Signal and Limit LEDs for performance monitoring
- Integrated crossover with low-cut, high-cut and full range mode
- Comprehensive circuit protection against short circuits, DC and thermal overload
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
- Product is on order
1 piece
€855,00
Monthly payment from: 25,00 €
Downloads:
Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg
Behringer LIVE BUDS

Brand:
BehringerDescription:
- Behringer LIVE BUDS High-fidelity true wireless earbuds provide wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
- Bluetooth 5.0 true wireless technology for exceptional sound quality with up to 33 ft (10 m) of wireless freedom
- Sound isolating design with a variety of ear plugs to block outside noise for detailed music experience
- Seamless phone, voice commands, volume and music via touch control
- Secure in-ear design ensures earphones stability and comfort
- Splash proof construction (IPX4) is ideal for sports, work out and any outdoor activity that requires pure listening pleasure
- Up to 3-hours of battery life that can be extended to 12-hours with the integrated battery charging case
- USB charging cable included
- Includes silicone earplugs in 3 sizes to ensure perfect fit
- Product is in stock
1 piece
€25,90
Price per piece: 25,90 €
Downloads:
Quick start guide : Behringer LIVE BUDS Quick start guide (.pdf)
Specifications
Bluetooth version V 5.0
Bluetooth range 10 meters (with no obstacles)
Frequency range 2402 - 2480 MHz
Channel number 79
Max output power CODEC support SBC
Driver unit 6 mm
Impedance 16 Ohm
Frequency response 20 Hz - 20 kHz
SPL 92 dB @1kHz (102 dB peak)
Rated / peak power 3 mW (5 mW peak)
Microphone sensitivity (- 42 dB ± 3 dB) @1kHz, 0dB=1V/Pa
Battery type Rechargeable Lithium battery
Working time Up to 3 hours (+ 9 hours via charging case)
Charging time 2 hours via USB 5 V / 500 mA
Tannoy LIVE MINI

Brand:
TannoyDescription:
- Tannoy LIVE MINI Enjoy your music on the go, anywhere you go
- Ultra-compact and mobile speaker that plays where you play
- Premium transducers for the ultimate listening experience
- Easy wireless connection to your Bluetooth* device
- Rechargeable battery provides up to 10 hours of music
- Innovative bass radiator alignment for extended bass performance
- Charging cradle serves as a home base for your speaker - charges while you play
- Wall charger to plug into the cradle or directly into the speaker
- Auxiliary input allows you to connect to your MP3 player and other audio sources
- Sleek and elegant design complements any listening environment
- Tannoy - 90 Years of authentic sound experience
- Product is in stock
1 piece
€115,00
Price per piece: 115,00 €
Downloads:
Product information : Tannoy LIVE MINI Product information (.pdf)
Quick start guide : Tannoy LIVE MINI Quick start guide (.pdf)
Specifications
Dimensions : 63 x 186 x 65mm
Weight : 0,89kg
Behringer C200

Brand:
BehringerDescription:
- Behringer C200 Modular column loudspeaker for portable PA applications and high quality music playback
- Extremely wide sound dispersion provides consistent sound to the audience and performers
- 200 Watt power with multi-channel Class-D technology
- High quality Bluetooth* audio streaming
- MP3 player included to play audio files via USB sticks and SD/MMC cards
- LED lighting creates club-style atmosphere
- Comprehensive remote control included for ultimate flexibility
- 3 channel mixer with individual gain controls
- Studio-grade echo adds finishing touch to your sound
- Intuitive user control interface with LCD display for ease of navigation
- 8" high excursion low frequency driver for strong sub-bass response
- 4 x 2.5" drivers with edge wound copper voice coils for extended high frequency reproduction
- Precision-lock system eliminates speaker cables and stands
- High impact and lightweight enclosure
- Integrated protective perforated steel mesh grilles
- Integral ergonomic carrying handle for ease of portability
- Product is on order
1 piece
€249,00
Price per piece: 249,00 €
Downloads:
Quick start guide : Behringer C200 Quick start guide (.pdf)
Specifications
Dimensions : 325 x 415 x 1385 mm
Weight : 11,6kg
Behringer C210

Brand:
BehringerDescription:
- Behringer C210 Modular column loudspeaker for portable PA applications and high quality music playback
- Extremely wide sound dispersion provides consistent sound to the audience and performers
- 200 Watt power with multi-channel Class-D technology
- High quality Bluetooth* audio streaming
- MP3 player included to play audio files via USB sticks and SD/MMC cards
- LED lighting creates club-style atmosphere
- Comprehensive remote control included for ultimate flexibility
- 3 channel mixer with individual gain controls
- Studio-grade echo adds finishing touch to your sound
- Intuitive user control interface with LCD display for ease of navigation
- 8" high excursion low frequency driver for strong sub-bass response
- 4 x 2.75" drivers with edge wound copper voice coils for extended high frequency reproduction
- Precision-lock system eliminates speaker cables and stands
- High impact and lightweight enclosure
- Integrated protective perforated steel mesh grilles
- Integral ergonomic carrying handle for ease of portability
- Product is on order
1 piece
€255,00
Price per piece: 255,00 €
Downloads:
Quick start guide : Behringer C210 Quick start guide (.pdf)
Specifications
Dimensions : 330 x 440 x 1385 mm
Weight : 13,9kg
Behringer C210B

Brand:
BehringerDescription:
- Behringer C210B Battery powered column loudspeaker for portable PA applications and high quality music playback
- Up to 6 hours of battery life at 100% playback power and 10 hours at 50% playback power with integrated Li-Ion battery
- Integrated charging time of 7 hours up to 80% and 10 hours up to 100% battery levels
- 160 Watt power with multi-channel Class-D technology
- High quality Bluetooth* audio streaming
- LED lighting creates club-style atmosphere
- 3 channel mixer with individual gain controls
- Studio-grade echo adds finishing touch to your sound
- Intuitive user control interface with LCD display for ease of navigation
- 8" high excursion low frequency driver for strong sub-bass response
- 4 x 2.75" drivers with edge wound copper voice coils for extended high frequency reproduction
- Precision-lock system eliminates speaker cables and stands
- High impact and lightweight enclosure
- Integrated protective perforated steel mesh grilles
- Integral ergonomic carrying handle for ease of portability
- Product is on order
1 piece
€335,00
Price per piece: 335,00 €
Downloads:
Quick start guide : Behringer C210B Quick start guide (.pdf)
Specifications
Dimensions : 330 x 440 x 1385 mm
Weight : 15,8kg
Pioneer DM-40BT

Brand:
PioneerDescription:
- Create a versatile home set-up that can deliver a rich, balanced sound for producing and DJing. These compact desktop speakers have been designed using professional speaker technology and effortlessly connect to all your Bluetooth® wireless devices.
The DM-40BT comes in black or white and retains its Groove Technology from the highly-reputed DM-40 active monitor speakers. Expect a smooth bass response, a wide sweet spot enabled by DECO technology, clear audio quality and rich bass sound all at the same time.
The DM-40BT speakers are sold as a pair. - Bluetooth® connection
Bluetooth® technology allows you to play tracks from smartphones and tablets wirelessly, while Qualcomm® aptX™ and AAC support lets you enjoy even higher quality sound reproduction. - Front-loaded bass reflex system
4-inch fiberglass woofers output a strong, punchy bass from the front, while grooves on the ducts reduce air friction. This way you'll feel a tight bass kick even when the monitors are positioned against the wall. - 3D stereo sound
The DM-40BT's ¾-inch soft dome tweeters are fitted with DECO convex diffusers that channel high frequencies in every direction. This delivers a wide sweet spot and 3D stereo sound wherever you sit or stand. - Time alignment
Class AB amplifiers deliver a crisp sound with low-distortion. Plus the tweeter and woofer are perfectly aligned to eliminate crossover and ensure a well-balanced response across the frequencies. - Smart design
The cabinets' curved front edges provide maximum rigidity and minimum resonance for a clean sound at all volumes - and they'll look good in your home set-up. - Product is in stock
1 piece
€199,00
Price per piece: 199,00 €
Specifications
Main Features
Type: 2-way bass reflex, active monitor speakers
Tweeter: ¾-inch Soft Dome
Woofer: 4-inch Fiberglass
What's in the box
DM-40BT x 2
Power cord
2 m speaker cable (for left/right channel connection)
Audio converter cable (3.5 mm stereo mini plug to RCA)
Bottom cushion x 8
Operating instructions
Specifications
Dimensions:
Left ch: 146 x 227 x 223 mm
Right ch: 146 x 227 x 210 mm
Weight:
Left ch: 2.7 kg
Right ch: 2.2 kg
Frequency Range: 70 - 30000 Hz
Amplifier Output: Class A/B amp: 2 x 21 W / 4 Ω
Impedance: 10 kΩ
Terminals
Inputs:
1 LINE (RCA)
1 LINE (Mini-jack)
Outputs: 1 HEADPHONE MONITOR (Mini-jack)
Bluetooth
Output: Bluetooth® Specification Class 2
Supported Codec
SBC, AAC, Qualcomm® aptX™, Qualcomm® aptX™ Low Latency
Version: Bluetooth® Specification Ver. 4.2
Lab gruppen PDX3000
Lab gruppen PDX3000
1 piece
€945,00
1 piece
€945,00
Lab gruppen PDX3000

Brand:
Lab gruppenDescription:
- Lab gruppen PDX3000 2-channel amplifier
- 2x 800W @8Ohm
- 2x 1500W @4Ohm
- 2x 1000W @2Ohm
- Full DSP feature set for speaker processing
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Comprehensive configuration and monitoring software through USB connection
- Intuitive front panel user interface for easy setup and monitoring
- Precise power management guarantees performance and efficiency
- Comprehensive circuit protection against short circuits, DC and thermal overload
- User configurable gain, delay, crossover, EQ, limiter and dynamic EQ
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Pre-configured crossover settings for speaker configuration
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Front panel locking functionality for ultimate security
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
- Designed and engineered in Sweden
- Product is on order
1 piece
€945,00
Monthly payment from: 27,00 €
Downloads:
Specifications
Dimensions : 483 x 326 x 93mm
Weight : 6,5kg
Midas M32C TourPro Compact 16
Midas M32C TourPro Compact 16
1 piece
€2 915,00
1 piece
€2 915,00
Midas M32C TourPro Compact 16

Brand:
MidasDescription:
Midas M32C
- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- Midas DL153
- Midas DL153 16 award-winning Midas microphone preamplifiers with switchable +48 V phantom power
- 8 electronically balanced low impedance line level outputs
- Remote operation up to 100 m via CAT5/5e cable
- Selectable 96 kHz or 48 kHz sample rate operation
- 0,5m Cat5e cable
- Product is on order
1 piece
€2 915,00
Monthly payment from: 83,00 €
Downloads:
Product information: Midas M32C Product information (.pdf)
Quick start guide: Midas M32C Quick start guide (.pdf)
Product information: Midas DL153 Product information (.pdf)
Quick start guide: Midas DL153 Quick start guide (.pdf)
Midas M32C Tourpack Compact 32
Midas M32C Tourpack Compact 32
1 piece
€2 625,00
1 piece
€2 625,00
Midas M32C Tourpack Compact 32

Brand:
MidasDescription:
Midas M32C
- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- Midas DL32
- Midas DL32 32 award-winning Midas PRO microphone preamplifiers with switchable 48 V phantom power
- 16 electronically balanced low impedance line level outputs
- ULTRANET personal monitoring system connectivity for in-ear applications
- Digital audio and control connectivity for Turbosound speaker systems with ULTRANET networking capability
- Dual AES50 SuperMAC ports for cascading additional DL16 stageboxes—no merger or router required
- 0,5m Cat5e cable
- Product is in stock
1 piece
€2 625,00
Monthly payment from: 75,00 €
Downloads:
Product information: Midas M32C Product information (.pdf)
Quick start guide: Midas M32C Quick start guide (.pdf)
Product information: Midas DL32 Product information (.pdf)
Quick start guide: Midas DL32 Quick start guide (.pdf)
Midas M32R Live 32 Tour Bundle
Midas M32R Live 32 Tour Bundle
1 piece
€4 649,00
1 piece
€4 649,00
Midas M32R Live 32 Tour Bundle

Brand:
MidasDescription:
Midas M32R
- Live performance and studio recording digital console with up to 40 simultaneous input channels
- 16 award-winning Midas PRO microphone preamplifiers
- 25 time-aligned and phase-coherent mix buses
- AES50 networking allows up to 96 inputs and 96 outputs
- 32 bi-directional channels of live recording/playback on dual SD/SDHC (cards not included)
- Midas DL32
- Midas DL32 32 award-winning Midas PRO microphone preamplifiers with switchable 48 V phantom power
- 16 electronically balanced low impedance line level outputs
- ULTRANET personal monitoring system connectivity for in-ear applications
- Digital audio and control connectivity for Turbosound speaker systems with ULTRANET networking capability
- Dual AES50 SuperMAC ports for cascading additional DL16 stageboxes—no merger or router required
- Klark Teknik NCAT50E
- Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
- Length 50 metres
- Tested for both AES50 and EtherSound* audio networking
- Dual shielding for protection against EMI and ESD interference
- Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
- Flight case M32R-Live
- Product is on order
1 piece
€4 649,00
Monthly payment from: 132,00 €
Downloads:
Product information: Midas M32R Live Product information (.pdf)
Quick start guide: Midas M32R Live Quick start guide (.pdf)
Product information: Midas DL32 Product information (.pdf)
Quick start guide: Midas DL32 Quick start guide (.pdf)
Product information : Klark Teknik NCAT50E Product information (.pdf)
Behringer DR115DSP

Brand:
BehringerDescription:
- High-Power 1,400-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- Dedicated DSP function for EQ, system control and speaker protection and Built-in Bluetooth* receiver
- 2-channel mixer with individual Mic/Line inputs and level controls
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
- High-performance DSP functions with optimization for 4 unique sound programs: Music, Live, Speech, DJ/CLUB
- Excellent Low-Cut filter performance, switchable at 80, 100, 120 or 150 Hz
- State-of-the-art 1.75'' compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning: Stand mounting with 35-mm pole socket Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
- Product is on order
1 piece
€319,00
Price per piece: 319,00 €
Downloads:
Quick start guide: Behringer DR115 quick start guide (.pdf)
Specifications
Max SPL : 136dB
Dispersion : 90x60
Weight : 21,4kg
Dimensions : 687 x 422 x 390mm
Behringer DR110DSP

Brand:
BehringerDescription:
- High-Power 1,000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
- Dedicated DSP function for EQ, system control and speaker protection and Built-in Bluetooth* receiver
- 2-channel mixer with individual Mic/Line inputs and level controls
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Extremely powerful 10'' long-excursion driver provides incredibly deep bass and acoustic power
- High-performance DSP functions with optimization for 4 unique sound programs: Music, Live, Speech, DJ/CLUB
- Excellent Low-Cut filter performance, switchable at 80, 100, 120 or 150 Hz
- State-of-the-art 1.35'' compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential horn
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning: Stand mounting with 35-mm pole socket Tilts on its side for use as a floor monitor
- Ergonomically shaped handles for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
- Product is on order
1 piece
€249,00
Price per piece: 249,00 €
Downloads:
Quick start guide: Behringer DR110 quick start guide (.pdf)
Specifications
Max SPL : 132dB
Dispersion : 90x60
Weight : 13,1kg
Dimensions : 521 x 302 x 312 mm
Behringer MPA200BT

Brand:
BehringerDescription:
- Behringer MPA200BT All-in-one portable PA system with full Bluetooth* connectivity
- Incredibly simple to set-up and use no technical background required
- 200 Watts of powerful, high-quality sound for audiences of up to 500 people
- Perfect for parties, schools, corporate and educational presentations, seminars, aerobics, auctioneers, working musicians, tour guides, weddings, etc.
- High-Performance Behringer ULM digital wireless microphone system included
- Comprehensive remote control via Apple iPhone/iPad* and future Android* app
- High quality Bluetooth* stereo audio streaming
- AC & battery operated with up to 20 hours continuous use per battery charge
- 4-channel digital mixer with gain setting recall
- DSP presets for application type
- Intuitive single rotary control user interface with LCD display for ease of navigation
- 4-channel inputs with individual volume control to connect to your mic, smart phone and other line level source
- Powerful 8" woofer and high-resolution tweeter driven by a Class-D amplifier
- Integrated stand mounting with 35 mm pole socket
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~) and low power consumption for energy saving
- Product is in stock
1 piece
€453,00
Price per piece: 453,00 €
Downloads:
Product information: Behringer MPA200BT Product information (.pdf)
Quick start guide: Behringer MPA200BT quick start guide (.pdf)
Specifications
Behringer MPA200BT
Dimensions : 420 x 280 x 257mm
Weight : 12.1kg