Webshop support
Call us: +372 5668 1714

22 products

Lab gruppen FAD602

Lab gruppen FAD602

Brand:

Lab gruppen

Description:

  • Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€435,00

Price per piece: 435,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD1202

Lab gruppen FAD1202

Brand:

Lab gruppen

Description:

  • Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€485,00

Price per piece: 485,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD2402

Lab gruppen FAD2402

Brand:

Lab gruppen

Description:

  • Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€532,00

Monthly payment from: 16,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen CMA1201

Lab gruppen CMA1201

Brand:

Lab gruppen

Description:

  • Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
  • 4 mic/line inputs with individual volume controls
  • Energy efficient design conserves energy and reduces
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • Direct drive, constant power technology for superior audio performance and reliability
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Front panel power control button for direct access
  • Aux output for expansion to additional amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Specifications

Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

 

Lab gruppen CM82

Lab gruppen CM82

Brand:

Lab gruppen

Description:

  • Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
  • 8 mic/line inputs with individual volume controls and output routing
  • Individual front panel master volume and bass/treble controls for each output
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, 19" enclosure with brackets for rack mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 437 x 248 x 44mm
Weight : 2,4kg

Lab gruppen CM41

Lab gruppen CM41

Brand:

Lab gruppen

Description:

  • Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
  • 4 mic/line inputs with individual volume controls
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€272,00

Price per piece: 272,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 299 x 218 x 44mm
Weight : 2,1kg

Lab gruppen IPX1200

Lab gruppen IPX1200

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 180,00

Monthly payment from: 34,00 €

Downloads:


Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo  300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg

Lab gruppen IPX2400

Lab gruppen IPX2400

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 496,00

Monthly payment from: 43,00 €

Downloads:


Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo  600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg

Lab gruppen E 12:2

Lab gruppen E 12:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€1 479,00

Monthly payment from: 42,00 €

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W

Lab gruppen E 40:4

Lab gruppen E 40:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
    4  x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 790,00

Monthly payment from: 79,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 20:4

Lab gruppen E 20:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 649,00

Monthly payment from: 75,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 10:4

Lab gruppen E 10:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€2 090,00

Monthly payment from: 60,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg

*See spec sheet for details

Lab gruppen E 5:4

Lab gruppen E 5:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 890,00

Monthly payment from: 54,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg

Lab gruppen E 2:2

Lab gruppen E 2:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€899,00

Monthly payment from: 26,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 8:2

Lab gruppen E 8:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 379,00

Monthly payment from: 40,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 4:2

Lab gruppen E 4:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 090,00

Monthly payment from: 31,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen PD3000

Lab gruppen PD3000

Brand:

Lab gruppen

Description:

  • Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
  • Precise power management guarantees performance and efficiency
  • Proven and reliable Class-D amplifier stage
  • Highly efficient Switch Mode Power Supply (SMPS)
  • Speaker Protect Limiter for maximum level output and reliable driver protection
  • Accurate 8-segment Signal and Limit LEDs for performance monitoring
  • Integrated crossover with low-cut, high-cut and full range mode
  • Comprehensive circuit protection against short circuits, DC and thermal overload
  • Balanced XLR and TRS input connectors with optimised sensitivities
  • Professional speakON* output connectors
  • Efficient cooling with temperature-controlled fan
  • Rugged and lightweight rack mount chassis for maximum durability
  • Product is on order

1 piece

€609,00

Monthly payment from: 18,00 €

Downloads:


Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg

Lab gruppen PDX3000

Lab gruppen PDX3000

Brand:

Lab gruppen

Description:

  • Lab gruppen PDX3000 2-channel amplifier
  • 2x 800W @8Ohm
  • 2x 1500W @4Ohm
  • 2x 1000W @2Ohm
  • Full DSP feature set for speaker processing
  • Proven and reliable Class-D amplifier stage
  • Highly efficient Switch Mode Power Supply (SMPS)
  • Comprehensive configuration and monitoring software through USB connection
  • Intuitive front panel user interface for easy setup and monitoring
  • Precise power management guarantees performance and efficiency
  • Comprehensive circuit protection against short circuits, DC and thermal overload
  • User configurable gain, delay, crossover, EQ, limiter and dynamic EQ
  • Speaker Protect Limiter for maximum level output and reliable driver protection
  • Pre-configured crossover settings for speaker configuration
  • Balanced XLR and TRS input connectors with optimised sensitivities
  • Professional speakON* output connectors
  • Front panel locking functionality for ultimate security
  • Efficient cooling with temperature-controlled fan
  • Rugged and lightweight rack mount chassis for maximum durability
  • Designed and engineered in Sweden
  • Product is on order

1 piece

€705,00

Monthly payment from: 20,00 €

Specifications

Dimensions : 483 x 326 x 93mm

Weight : 6,5kg

Behringer WING 32 set

Behringer WING 32 set

Behringer WING 32 set

1 piece

€4 789,00

1 piece

€4 789,00

Monthly payment from: 136,00 €

Behringer WING 32 set

Behringer WING 32 set

Description:

  • Behringer WING
  • 8 award-winning Midas PRO mic preamps and 8 Midas PRO outputs onboard
  • 24 motorized 100 mm faders in 3 separate, fully configurable sections
  • "Plug and play" remote I/O connectivity for up to 144 input and output signals over 3 AES50 ports featuring Klark Teknik’s SuperMAC technology for ultra-low jitter and latency
  • Large main display with capacitive touch screen and adjustable display swivel
  • Unique touch-sensitive channel editing section with 11 rotary controls and dedicated color TFT for staying on top of all channel properties
  • Optional module for 64x64 channels of audio over Ethernet – supporting WAVES SoundGrid Technology* or Dante/AES67 Technology*
  • 48 x 48 channel USB 2.0 audio interface onboard with DAW remote control emulating HUI* and Mackie Control*
  • Dual-SD card live recorder/player with up to 64 tracks and markers for identifying song positions
  • Additional 4-channel control section with rotary controls, buttons and parameter display for permanent access to mains, matrices or "money-channels"
  • Premium FX rack with 8 true-stereo processors and world-class TC algorithms, Lexicon*, Quantec* and EMT* emulations
  • Standard FX rack with 8 true-stereo processors for a wide array of modulation, EQ, dynamics etc.
    - also allows blending outboard effects to the mix
  • 5 variable plug-in processing slots for all 40 stereo input channels, featuring the most iconic vintage analog equalizers and compressors, plus insert FX slot and 4-band parametric EQ for all 8 stereo aux channels
  • Custom Controls offering 16 latching or momentary buttons and 4 rotary controls, easily being configured for preferred functions
  • 4 main, 8 matrix and 16 aux stereo buses, featuring dual inserts, 8-band parametric EQ's, stereo imager and full dynamics processing
  • 2 Ethernet ports with integrated switch for networked remote control
  • Built-in expansion port for optional audio interface cards or digital networking bridges, MADI* and ADAT/WC
  • StageCONNECT 32-channel low-latency interface for personal monitoring or analog I/O boxes, AES/EBU stereo digital in
    - and outputs on balanced XLR, 8x8 balanced TRS auxiliary line in
    - and outputs, 2 TRS phones connectors, MIDI I/O and 4 GPIO ports
  • Midas DL32
  • Midas DL32 has 32 award-winning Midas PRO microphone preamplifiers with switchable 48 V phantom power
  • 16 electronically balanced low impedance line level outputs
  • ULTRANET personal monitoring system connectivity for in-ear applications
  • Digital audio and control connectivity for Turbosound speaker systems with ULTRANET networking capability
  • Dual AES50 SuperMAC ports for cascading additional DL16 stageboxes—no merger or router required
  • Automatic AES50 stage-split mode when connected between Midas M32 Series FOH and monitor consoles
  • Dual ADAT outputs providing 16-channel digital output on two optical TOSLINK* connectors
  • 2 AES-3 ports (AES/EBU), for directly connecting PA system controllers with digital inputs
  • Remote operation via shielded CAT5e cable up to 330 ft / 100 m length
  • Mute All function for quietly patching any inputs on stage
  • MIDI In/Out for bidirectional communication between Midas M32 Series console and on-stage MIDI devices
  • Features Neutrik etherCON* AES50 and ULTRANET network ports
  • Rugged 3U rackmount chassis for durability in portable applications
  • Auto-ranging universal switch-mode power supply


  • Product is on order

1 piece

€4 789,00

Monthly payment from: 136,00 €

Downloads:

 

Quick start guide : Behringer WING Quick start guide (.pdf)
Product information: Midas DL32 Product information (.pdf)
Quick start guide: Midas DL32 Quick start guide (.pdf)

Midas M32C TourPro Compact 16

Midas M32C TourPro Compact 16

Brand:

Midas

Description:


Midas M32C

  • Live performance and studio recording digital console with up to 40 simultaneous input channels
  • 25 time-aligned and phase-coherent mix buses
  • AES50 networking allows up to 96 inputs and 96 outputs
  • Midas DL153
  • Midas DL153 16 award-winning Midas microphone preamplifiers with switchable +48 V phantom power
  • 8 electronically balanced low impedance line level outputs
  • Remote operation up to 100 m via CAT5/5e cable
  • Selectable 96 kHz or 48 kHz sample rate operation
  • 0,5m Cat5e cable
  • Product is on order

1 piece

€2 915,00

Monthly payment from: 83,00 €

Midas M32C Tourpack Compact 32

Midas M32C Tourpack Compact 32

Brand:

Midas

Description:


Midas M32C

  • Live performance and studio recording digital console with up to 40 simultaneous input channels
  • 25 time-aligned and phase-coherent mix buses
  • AES50 networking allows up to 96 inputs and 96 outputs
  • Midas DL32
  • Midas DL32 32 award-winning Midas PRO microphone preamplifiers with switchable 48 V phantom power
  • 16 electronically balanced low impedance line level outputs
  • ULTRANET personal monitoring system connectivity for in-ear applications
  • Digital audio and control connectivity for Turbosound speaker systems with ULTRANET networking capability
  • Dual AES50 SuperMAC ports for cascading additional DL16 stageboxes—no merger or router required
  • 0,5m Cat5e cable
  • Product is in stock

1 piece

€2 579,00

Monthly payment from: 73,00 €

Midas M32R Live 32 Tour Bundle

Midas M32R Live 32 Tour Bundle

Brand:

Midas

Description:


Midas M32R

  • Live performance and studio recording digital console with up to 40 simultaneous input channels
  • 16 award-winning Midas PRO microphone preamplifiers
  • 25 time-aligned and phase-coherent mix buses
  • AES50 networking allows up to 96 inputs and 96 outputs
  • 32 bi-directional channels of live recording/playback on dual SD/SDHC (cards not included)
  • Midas DL32
  • Midas DL32 32 award-winning Midas PRO microphone preamplifiers with switchable 48 V phantom power
  • 16 electronically balanced low impedance line level outputs
  • ULTRANET personal monitoring system connectivity for in-ear applications
  • Digital audio and control connectivity for Turbosound speaker systems with ULTRANET networking capability
  • Dual AES50 SuperMAC ports for cascading additional DL16 stageboxes—no merger or router required
  • Klark Teknik NCAT50E
  • Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
  • Length 50 metres
  • Tested for both AES50 and EtherSound* audio networking
  • Dual shielding for protection against EMI and ESD interference
  • Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
  • Flight case M32R-Live
  • Product is in stock

1 piece

€4 649,00

Monthly payment from: 132,00 €

0