Webshop support
Call us: +372 5668 1714

39 products

Lake LM44

Lake LM44

Brand:

Lake

Description:

  • Lake LM44 4 in / 4 out loudspeaker processor
  • High-performance Lake digital audio system processor for unparalleled loudspeaker management and system control
  • Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
  • Configurable Lake groups offers simultaneous non-destructive parameter adjustments across all Lake platforms
  • Redundant audio inputs and on-board system surveillance for full system security
  • Full system control via Lake Controller touch-screen-optimized software application
  • LimiterMax Peak and RMS limiters offer seamless power output control
  • 4 x Lake Mesa modules or 2 x Lake Contour modules for optimized system or loudspeaker control
  • 4 x analog inputs and 4 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR * connectors
  • 4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
  • 2 x Neutrik etherCON * RJ-45 ports provide dual-redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software
  • High quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
  • Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
  • Rugged 1U rackmount chassis for space saving durability in touring applications
  • 100 user presets for simple and efficient system configuration and set-up
  • Backlit, white-on-black front panel daylight readable display
  • Dynamic buttons and rotary encoder for front panel parameter adjustment
  • Software configurable GPIO for 3rd party system control
  • Universal 70 - 265 V power supply served through a locking IEC mains connector

1 piece

€3 799,00

Monthly payment from: 108,00 €

Downloads:


Quick start guide : Lake LM44 Quick start guide (.pdf)

Specifications

Lake features
Module configuration 2 Contour or 4 Mesa modules
Processing channels 6 in Contour mode, 4 in Mesa mode
Input routers 8 input routers with 4 priorities in each, seamless failover to lower priorities
Module Input mixer 4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers.
Input processing Parameteric EQ with Mesa and Ideal Graphic equalizers, both utilizing Raised Cosine algorithms
Output processing Linear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters
Features Delay, Mute, Phase, Gain etc.
Limiters LimiterMax with Peak and RMS limiter. Configurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack,
MaxRMSRelease and MaxPeakLevel
SuperModule compatible Yes
Audio Performance
Conversion resolution 24-bit
Internal sample rate 96 kHz
Internal data path 32-bit floating point
Product propagation delay Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms
Analog (Analog in to Analog out via module) 1.049 ms
Pass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms
Maximum available user delay 2 seconds
Analog
Inputs and Outputs 4 inputs, 4 outputs
Frequency Response, analog-to-digital +/-0.1 dB, 20 Hz to 20 kHz
Frequency Response, digital-to-analog +/-0.1 dB, 20 Hz to 20 kHz
THD+Noise, Inputs 0.00024% typical at 1 kHz
THD+Noise, Outputs 0.00037% typical at 1 kHz
Dynamic Range, Inputs 116 dB
Dynamic Range, Outputs 115 dB
Input Impedance 20 kOhm balanced, 10 kOhm unbalanced
Output Impedance 50 ohm
Maximum Input level +26 dBu
Input Sensitivity - settings for digital full-scale +12 dBu, +26 dBu
Maximum Output level +21 dBu
Crosstalk, Inputs -98 dB, 20 Hz to 20 kHz
Crosstalk, Outputs -98 dB, 20 Hz to 20 kHz
Common Mode Rejection Ratio (CMRR) >70 dB, 20 Hz to 20 kHz
AES3/EBU (sample rate converters available as desired)
Inputs and Outputs 8 inputs, 8 outputs
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz (I/O individually selectable)
Supported resolutions Up to 24-bit
THD+Noise 0.00002 % at 96 kHz and 0.00006 % at 44.1 kHz sample rate
Dynamic Range Base48 -140 dBFS, Base44 -125 dBFS
Clocking
Clock selection Manual or automatic according to priority scheme
Oscillator type / Synchronization High quality VCXO clock can provide Dante master clock or slave. Automatic synchronization with Dante network.
Base48 2 (Primary and SRC)
Base44 1 (SRC)
Clock accuracy < ± 7 ppm
Dante (Audio Network)
Inputs and Outputs 4 inputs, 8 outputs
Supported sample rates 48 kHz, 96 kHz
Support redundant paths Glitch-free Dual Redundant Dante using two Ethernet networks
Receiver latency 0.5 ms, 0.8 ms, 1.3 ms, 4 ms
GPIO
Inputs 2 General Purpose Inputs (GPI) supporting external contact closure
Outputs 2 General Purpose Outputs (GPO) with internal contact closure
Software configurable input control Standby state, Mute state, Dual preset recall
Software configurable output indication Standby state, Mute state, Faults, Ready
Device presets
Frame presets 100
Power requirements
Nominal Voltage 100-240 VAC
Operating Voltage 70-265 VAC
Power consumption 30 W maximum
Front panel interface
Display Daylight readable monochrome (128 x 64)
Meters LED for signal level and clip indicators per channel
Mute access Dedicated Mute button and LED indication per processing channel
Menu Intuitive and powerful user interface with soft keys
Status indication LED Fault and Warning indication and detailed description on display
Parameter Adjustment Single/multiple parameter edits with rotary encoder
Back Panel Interface
Analog Inputs and Outputs 4 + 4 XLR
AES Inputs and Outputs DB-25, with selectable termination
Ethernet Auto 100/1000, Auto uplink, 2 x Neutrik etherCON RJ45 connectors
GPIO DB-9
Power Detachable locking 3-pin IEC
Control and monitoring interface Via Ethernet for Lake Controller software, or DLM (the 3rd party protocol)
Dimensions (W/H/D) 483 mm (19"), 44 mm (1 U), 290 mm (11.5")
Weight 5 Kg (11 lbs.)
Finish Black painted steel chassis with cast alumimum handles
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

Lake LM26

Lake LM26

Brand:

Lake

Description:

  • Lake LM26 2in / 6out Loudspeaker processor
  • High-performance Lake digital audio loudspeaker processor for unparalleled loudspeaker management and system control
  • Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
  • Configurable Lake groups offers simultaneous non-destructive parameter adjustments across all Lake platforms
  • Redundant audio inputs and on-board system surveillance for full system security
  • Full system control via Lake Controller touch-screen-optimized software application
  • LimiterMax Peak and RMS limiters offer seamless power output control
  • 4 x Lake Mesa modules or 2 x Lake Contour modules for optimized system or loudspeaker control
  • 2 x analog inputs and 6 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR * connectors
  • 4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
  • 2 x Neutrik etherCON * RJ-45 ports provide dual-redundant Dante interfaces and remote configuration via Lake Controller and Dante Controller software
  • High quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
  • Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
  • Rugged 1U rackmount chassis for space saving durability in touring applications
  • 100 user presets for simple and efficient system configuration and set-up
  • Backlit, white-on-black front panel daylight readable display
  • Dynamic buttons and rotary encoder for front panel parameter adjustment
  • Software configurable GPIO for 3rd party system control
  • Universal 70 - 265 V power supply served through a locking IEC mains connector
  • Product is on order

1 piece

€3 199,00

Monthly payment from: 91,00 €

Downloads:


Quick start guide : Lake LM26 Quick start guide (.pdf)

Specifications

2-in/6-out Lake Processor
2 Contour Modules
Raised Cosine Mesa and Ideal graphic input equalizer
Linear phase and classic crossovers and output EQ
LimiterMax peak and RMS limiter
Delay, mute, phase, gain
Audio Performance
Internal sample rate: 96 kHz
A/D and D/A conversion resolution: 24 bit
Internal data path: 32 bit floating point
System propagation delay: < 1.22 ms
Maximum available delay: 2 seconds
Analog
Inputs and Outputs 2 inputs, 6 outputs
Dynamic range, inputs 116 dB
Dynamic range, outputs 115 dB
Frequency response, analog to digital +/-0.1 dB, 20 Hz to 20 kHz
Frequency response, digital to analog +/-0.03 dB, 20 Hz to 20 kHz
THD + Noise, inputs 0.00024% at 1 kHz
THD + Noise, outputs 0.00037% at 1 kHz
Iso-Float ground isolation Yes, separate setting for input and output
Input sensitivity settings 12 or 26 dBu
Maximum output level 21 dBu
Input impedance 20 kOhm balanced, 10 kOhm unbalanced
Common mode rejection -74 dB, 20 Hz to 20 kHz
Crosstalk -98 dB, 20 Hz to 20 kHz
AES3
Inputs and Outputs 4 inputs, 8 outputs
Supported resolutions Up to 24 bit
Supported sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
Termination Selectable
Dante Audio Network
Inputs and Outputs 4 inputs, 8 outputs
Supported sample rates 48, 96 kHz
Supports redundant paths Yes
Flexible topology Yes
Network latency 0.5, 0.8, 1.3, 4 ms
Front panel user interface
Display Daylight readable monochrome
Meters LED meters and clip indicators per channel
Mute access Mute button and LED indication per channel
LED Fault and Warning indication Yes
Parameter adjustment Rotary encoder
Standby Power button On/Standby
Back panel interface
Analog inputs and outputs 2 + 6 XLR
AES inputs and outputs DB-25
Ethernet Dual Neutrik ® etherCON ®
GPIO DB-9
Power Locking 3-pin IEC
Control and monitoring interface Via Ethernet for Lake Controller software
Ethernet
Gigabit Ethernet 1000 Base-T
Fast Ethernet 100 Base-Tx
GPIO
Inputs 2 General Purpose Inputs (GPI) supporting external contact closure
Outputs 2 General Purpose Outputs (GPO) with internal contact closure
Software configurable input control Standby state, Mute state, Dual Preset recall
Software configurable output indication Standby state, Mute state, Faults, Ready
Device presets
Frame presets 100
Power
Nominal voltage 100-240 VAC
Operating voltage 70-265 VAC
Power consumption 30 W maximum
Dimensions (W/H/D) W: 483 mm (19”), H: 44 mm (1 U), Overall D: 290 mm (11.5”)
Weight 5 Kg (11 lbs.)
Finish Black painted steel chassis with aluminum handles
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

Shure ULXD24/B58

Shure ULXD24/B58

Brand:

Shure

Description:

  • Shure ULXD24/B58 raadiomikrofoni komplekt
  • ULXD4
  • Digital Predictive Switching Diversity
  • Up to 72 MHz tuning range (region dependent)
  • Optimized scanning automatically finds, and prioritizes the cleanest frequencies to be manually deployed to transmitters over IR sync
  • Bodypack Frequency Diversity ensures uninterrupted audio for mission critical applications
  • Individual gain controls (up to 60 dB), LED meters, and XLR outputs for each channel
  • Ethernet networking for: streamlined frequency coordination and deployment across multiple receivers; compatibility with Wireless Workbench® 6 software for advanced coordination, monitoring, and control
  • Compatible with AMX and Crestron control systems
  • Interference detection and alerts
  • Intuitive front panel LCD menu and controls with various lockout options, plus audio and RF LED meters with peak indicator
  • Removable half wave antennas
  • 24 bit / 48 kHz digital audio
  • 20 Hz – 20 kHz frequency range with flat response
  • Greater than 120 dB dynamic range
  • Up to 22 active transmitters in one 8 MHz TV channel in standard mode; High Density mode enables up to 63 active transmitters in one  8 MHz TV channel
  • AES-256 bit encryption equipped for secure wireless transmission
  • ULXD2 Beta58
  • 30 Hz–20 kHz range with flat frequency response (actual response is microphone dependent)
  • Interchangeable Shure microphone cartridgesAES 256-bit encryption for applications for which secure transmission is needed
  • Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
  • Shure Lithium-Ion rechargeable battery pack provides over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect
  • External charging contacts for docked charging (with the SBC200 Dual Docking Charger)
  • Backlit LCD with easy to navigate menu and controls
  • Rugged metal construction
  • Frequency and power lockout
  • Product is on order

1 piece

€2 429,00

Monthly payment from: 69,00 €

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

1 piece

€175,00

1 piece

€175,00

Price per piece: 175,00 €

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

Brand:

Shure

Description:

  • Shure WL185 Cardioid TQG Lavalier Microphone
  • Suitable for Shure bodypack
  • Product is in stock

 

1 piece

€175,00

Price per piece: 175,00 €

Specifications

Type: Condenser (electret bias)
Frequency Response: 50 to 17,000  Hz
Output Impedance: 1800  Ω
Sensitivity [1]: WL185     -45.5  dBV/Pa
Maximum SPL: WL185     130.5  dB SPL
Self Noise (A-Weighted): WL185     28.0  dB SPL
Dynamic Range: 102.5  dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter

Shure SLXD14/SM35

Shure SLXD14/SM35

Brand:

Shure

Description:

  • Shure SLXD14/SM35 Digital Wireless Receiver with bodypack and headset microphone
  • Transparent 24-bit digital audio
  • Extended 20 Hz to 20 kHz frequency range (microphone dependent)
  • 120 dB dynamic range
  • Digital predictive switching diversity
  • 44 MHz tuning bandwidth (region dependent)
  • 32 available channels per frequency band (region dependent)
  • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
  • Interchangeable microphone capsules
  • Rugged metal construction
  • Bodypack transmitter
  • Durable cardioid condenser microphone in a comfortable headset for hands-free vocal performance. Ideal for multi-instrumentalists
  • Product is on order

 

1 piece

€798,00

Monthly payment from: 23,00 €

Specifications

SM35 specs

Type Electret Condenser
Frequency Response 40 Hz to 20,000 Hz
Polar Pattern Unidirectional (Cardioid)
Output Impedance @ 1 kHz: 2400 Ω
Audio Output Level -59.0 dBV/Pa
Signal-To-Noise Ratio[1] @ 1 kHz: 55 dB
Maximum SPL[1] 1000 Ω load, @ 1% THD: 153.0 dB
Dynamic Range[1] @ 1 kHz, 1000 Ω load:114.0 dB
Equivalent Output Noise[1] Typical, A-Weighted: 39 dB
Power Requirements +5 V DC (nominal), 10 V maximum (DC bias)
Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Cable 1.1 m
Connector TA4F
Net Weight 72 g

SHURE SLXD14E/85 H56

SHURE SLXD14E/85 H56

Brand:

Shure

Description:

  • Shure SLXD14/85 wireless system
  • Including bodypack transmitter and lavalier microphone
  • Featuring the WL185 Cardioid Lavalier Microphone and the SLXD1 transmitter
  • The SLXD14/85 provides transparent digital audio and rock-solid RF stability for lecture halls and live performances.
  • Product is on order

 

1 piece

€819,00

Monthly payment from: 24,00 €

Lab gruppen FAD602

Lab gruppen FAD602

Brand:

Lab gruppen

Description:

  • Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€435,00

Price per piece: 435,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD1202

Lab gruppen FAD1202

Brand:

Lab gruppen

Description:

  • Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€485,00

Price per piece: 485,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD2402

Lab gruppen FAD2402

Brand:

Lab gruppen

Description:

  • Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€532,00

Monthly payment from: 16,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen CMA1201

Lab gruppen CMA1201

Brand:

Lab gruppen

Description:

  • Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
  • 4 mic/line inputs with individual volume controls
  • Energy efficient design conserves energy and reduces
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • Direct drive, constant power technology for superior audio performance and reliability
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Front panel power control button for direct access
  • Aux output for expansion to additional amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Specifications

Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

 

Lab gruppen CM82

Lab gruppen CM82

Brand:

Lab gruppen

Description:

  • Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
  • 8 mic/line inputs with individual volume controls and output routing
  • Individual front panel master volume and bass/treble controls for each output
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, 19" enclosure with brackets for rack mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 437 x 248 x 44mm
Weight : 2,4kg

Lab gruppen CM41

Lab gruppen CM41

Brand:

Lab gruppen

Description:

  • Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
  • 4 mic/line inputs with individual volume controls
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€272,00

Price per piece: 272,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 299 x 218 x 44mm
Weight : 2,1kg

Lab gruppen IPX1200

Lab gruppen IPX1200

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 180,00

Monthly payment from: 34,00 €

Downloads:


Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo  300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg

Lab gruppen IPX2400

Lab gruppen IPX2400

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 496,00

Monthly payment from: 43,00 €

Downloads:


Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo  600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg

Lab gruppen E 12:2

Lab gruppen E 12:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€1 479,00

Monthly payment from: 42,00 €

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W

Lab gruppen E 40:4

Lab gruppen E 40:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
    4  x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 790,00

Monthly payment from: 79,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 20:4

Lab gruppen E 20:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 649,00

Monthly payment from: 75,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 10:4

Lab gruppen E 10:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€2 090,00

Monthly payment from: 60,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg

*See spec sheet for details

Lab gruppen E 5:4

Lab gruppen E 5:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 890,00

Monthly payment from: 54,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg

Lab gruppen E 2:2

Lab gruppen E 2:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€899,00

Monthly payment from: 26,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 8:2

Lab gruppen E 8:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 379,00

Monthly payment from: 40,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 4:2

Lab gruppen E 4:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 090,00

Monthly payment from: 31,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen PD3000

Lab gruppen PD3000

Brand:

Lab gruppen

Description:

  • Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
  • Precise power management guarantees performance and efficiency
  • Proven and reliable Class-D amplifier stage
  • Highly efficient Switch Mode Power Supply (SMPS)
  • Speaker Protect Limiter for maximum level output and reliable driver protection
  • Accurate 8-segment Signal and Limit LEDs for performance monitoring
  • Integrated crossover with low-cut, high-cut and full range mode
  • Comprehensive circuit protection against short circuits, DC and thermal overload
  • Balanced XLR and TRS input connectors with optimised sensitivities
  • Professional speakON* output connectors
  • Efficient cooling with temperature-controlled fan
  • Rugged and lightweight rack mount chassis for maximum durability
  • Product is on order

1 piece

€855,00

Monthly payment from: 25,00 €

Downloads:


Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg

SHURE SE846 EARPHONES

SHURE SE846 EARPHONES

Brand:

Shure

Description:

  • Shure SE846 Professional Sound Isolating™ Earphones are engineered for unparalleled audio monitoring in a durable, discrete design
  • Four high-definition drivers, a groundbreaking low-pass filter, a customizable frequency response, and a detachable cable
  • Secure, over the ear cable with wireform fit ensures earphones stay in place and out of the way during hours of wear
  • Sound Isolating technology with selection of sleeves blocks up to 37 dB of outside noise and ensures custom, comfortable fit
  • Includes a premium carrying case, 1/4” adapter, fit kit with wide selection of sleeves, and nozzle removal tool with changeable inserts for frequency response adjustments
  • Three-way system configuration for dedicated low, mid and high frequency distribution
  • Groundbreaking low-pass filter provides the previously unattainable deep low-end performance of a true subwoofer—without sacrificing clarity or detail
  • Adjustable frequency response for customizable sound signatures with removable metal nozzle and changeable nozzle inserts (balanced, warm, and bright options included)
  • Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise for immersive listening on stage or on the streets
  • Innovative detachable cable system for flexible connection and wearing options with two standard 3.5 mm audio cables included (46” and 64”)
  • Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage
  • Silver-plated MMCX connector has a lock-snap mechanism allowing 360-degree rotation for a comfortable fit
  • Secure, over-the-ear design ensures earphones stay in place and out of the way for unmatched, long-wearing comfort
  • Designed to withstand the rigors of live performance with two-year warranty
  • Includes a premium carrying case, 1/4” adapter, fit kit with wide selection of sleeves, clothing clip, cleaning cloth, and nozzle removal tool with changeable inserts for frequency response adjustments
  • Product is on order

1 piece

€875,00

Monthly payment from: 25,00 €

SHURE SE535 EARPHONE

SHURE SE535 EARPHONE

Brand:

Shure

Description:

  • Shure SE535 Professional Sound Isolating™ Earphones provide spacious sound and rich bass through triple high-definition drivers
  • The discrete, secure design includes a detachable cable with wireform fit to keep earphones in pace and cables out of the way
  • Sound Isolating technology blocks up to 37 dB of outside noise
  • Includes a premium carrying case, 1/4” adapter, volume control and fit kit with wide selection of sleeves for custom fit
  • Triple high-definition drivers deliver spacious sound and rich bass in a discrete, durable design
  • Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music
  • Secure, over-the-ear design ensures earphones stay in place and cables out of the way for unmatched, long-wearing comfort
  • Gold-plated MMCX connector has a lock-snap mechanism allowing 360-degree rotation for a comfortable fit
  • Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage
  • Includes a zippered carrying case, volume control, airline adapter, ¼” adapter and fit kit with selection of sleeves
  • Designed to withstand the rigors of live performance with two-year warranty
  • Product is on order

1 piece

€389,00

Price per piece: 389,00 €

SHURE SE425 EARPHONE

SHURE SE425 EARPHONE

Brand:

Shure

Description:

  • Shure SE425 Professional Sound Isolating™ Earphones provide accurate, natural sound through dual high-definition drivers
  • The discrete, secure design includes a detachable cable with wireform fit to keep earphones in pace and cables out of the way
  • Sound Isolating technology blocks up to 37 dB of outside noise
  • Includes a premium carrying case, 1/4” adapter, and fit kit with wide selection of sleeves for custom fit
  • Dual high-definition drivers deliver accurate, natural sound in a discrete, durable design
  • Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music
  • Secure, over-the-ear design ensures earphones stay in place and cables out of the way for unmatched, long-wearing comfort
  • Gold-plated MMCX connector has a lock-snap mechanism allowing 360-degree rotation for a comfortable fit
  • Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage
  • Includes a zippered carrying case and fit kit with selection of sleeves
  • Designed to withstand the rigors of live performance with two-year warranty
  • Product is on order

1 piece

€255,00

Price per piece: 255,00 €

SHURE SE215 EARPHONE black

SHURE SE215 EARPHONE black

Brand:

Shure

Description:

  • Shure SE215 Professional Sound Isolating™ Earphones provide clear sound and deep bass through a single, high-definition driver
  • Discrete, secure design includes a detachable cable with wireform to keep earphones in place and cables out of the way
  • Sound Isolating technology blocks up to 37 dB of outside noise
  • Single dynamic driver delivers clear sound with deep bass performance in a discrete, durable design
  • Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music
  • Secure, over-the-ear design ensures earphones stay in place and cables out of the way for unmatched, long-wearing comfort
  • Gold-plated MMCX connector has a lock-snap mechanism allowing 360-degree rotation for a comfortable fit
  • Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage
  • Includes a zippered carrying case and fit kit with selection of sleeves
  • Designed to withstand the rigors of live performance with two-year warranty
  • Includes a zippered carrying case and fit kit with selection of sleeves for custom fit
  • Product is on order

1 piece

€119,00

Price per piece: 119,00 €

SHURE SE215 EARPHONE

SHURE SE215 EARPHONE

Brand:

Shure

Description:

  • Shure SE215 Professional Sound Isolating™ Earphones provide clear sound and deep bass through a single, high-definition driver
  • Discrete, secure design includes a detachable cable with wireform to keep earphones in place and cables out of the way
  • Sound Isolating technology blocks up to 37 dB of outside noise
  • Single dynamic driver delivers clear sound with deep bass performance in a discrete, durable design
  • Sound Isolating™ design featuring fit kit with a variety of sleeves blocks up to 37 dB of outside noise so you can hear the details of your music
  • Secure, over-the-ear design ensures earphones stay in place and cables out of the way for unmatched, long-wearing comfort
  • Gold-plated MMCX connector has a lock-snap mechanism allowing 360-degree rotation for a comfortable fit
  • Detachable cable is durable enough to withstand everyday wear, yet allows for easy replacement in case of damage
  • Includes a zippered carrying case and fit kit with selection of sleeves
  • Designed to withstand the rigors of live performance with two-year warranty
  • Includes a zippered carrying case and fit kit with selection of sleeves for custom fit
  • Product is on order

1 piece

€119,00

Price per piece: 119,00 €

Shure SLXD24DE/Beta58 H56

Shure SLXD24DE/Beta58 H56

Brand:

Shure

Description:

  • Shure SLXD24DE/Beta58 Dual Digital Wireless Receiver with handheld microphone
  • Transparent 24-bit digital audio
  • Extended 20 Hz to 20 kHz frequency range (microphone dependent)
  • 120 dB dynamic range
  • Digital predictive switching diversity
  • 44 MHz tuning bandwidth (region dependent)
  • 32 available channels per frequency band (region dependent)
  • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
  • Interchangeable microphone capsules
  • Rugged metal construction
  • 2x Handheld Transmitter With Beta®58A Capsule
  • Product is in stock

1 piece

€1 444,00

Monthly payment from: 41,00 €

Shure SLXD14/153T H56

Shure SLXD14/153T H56

Brand:

Shure

Description:

  • Shure SLXD14/153T wireless system with bodypack transmitter and earset
  • Transparent 24-bit digital audio
  • Extended 20 Hz to 20 kHz frequency range (microphone dependent)
  • 120 dB dynamic range
  • Digital predictive switching diversity
  • 44 MHz tuning bandwidth (region dependent)
  • 32 available channels per frequency band (region dependent)
  • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
  • Interchangeable microphone capsules
  • Rugged metal construction
  • Bodypack transmitter
  • Earset Headworn Microphone
  •     Subminiature, omnidirectional cartridge offers superior speech clarity and enhanced plosive protection with no proximity effect
        Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters
        Ultra-lightweight, comfortable, flexible design is stable and easy to place over either ear
        CommShield® Technology guards against interference from cellular RF devices and digital bodypack transmitters
        Reinforced, attached soft flex cable
        Matte black, tan, and cocoa colour options available
        Includes protective storage pouch, 3 windscreens, and collar clip
  • Product is on order

1 piece

€848,00

Monthly payment from: 24,00 €

0