Webshop support
Call us: +372 5668 1714

266 products

Midas AS80

Midas AS80

Brand:

Midas

Description:

  • Midas AS80 Single HyperMac to dual HMAC converter for running dual redundant 1 GBit connections
  • Up to 192 bidirectional channels at 96 kHz
  • Dual redundant auto-ranging universal switch-mode power supply
  • Compact and rugged design
  • 1U rackmountable design
  • Clocked from incoming HMAC ports
  • Connection redundancy status available from connected console indicating cable state
  • Neutrik etherCON * connectors used for AES50 ports and copper snake connection
  • Dual-fibre Neutrik opticalCON DUO * connector used for optical fibre snake connection
  • Product is on order

 

1 piece

€2 048,00

Monthly payment from: 58,00 €

Downloads:

Quick start guide : Midas AS80 Quick start guide (.pdf)

Specifications

Dimensions : 44 x 483 x 436 mm

Weight : 5,1kg

EAW UXA4401

EAW UXA4401

Brand:

EAW

Description:

  • EAW UXA4401 4-channel amplifier
  • 280W 4/8Ohm
  • Half rack extension and rear support hardware
  • Connection plate for 2x units & desk/wall mounting plate options
  • 4 inputs & 4 outputs
  • Pairs seamlessly with EAW installation loudspeakers
  • Optional Sync Functionality by S/PDIF linking to multiple amps
  • Connect wirelessly or direct to the amplifier via a web page interface
  • Configurable GPIO for additional control
  • Safety and EMC Certified. Compliant to ErP & EnergySTAR
  • Product is on order

 

1 piece

€1 490,00

Monthly payment from: 43,00 €

Downloads:

Specification sheet: EAW UXA4401 specification sheet (.pdf)

Specifications

EAW UXA4401

Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit

EAW MKC 50

EAW MKC 50

Brand:

EAW

Description:

  • EAW MKC50 5,25"+1" 2-way coaxial speaker for installation
  • With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
  • Pristine Audio
  • Smaller Package
  • Flexibility Is Key
  • Versatility For
  • A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
  • The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
  • Other deployment options include a ceiling and support for third-party mic stand mount
  • Available as standard in black or white
  • Product is on order

1 piece

€339,00

Price per piece: 339,00 €

Downloads:

Specification sheet: EAW MKC50 specification sheet (.pdf)

Specifications


Model: MKC50
Frequency Response​: 80Hz-20kHz
Max SPL: 121dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:

LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 150W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 235 x 165 x 141mm
Weight: 3.3kg

EAW MKC 60

EAW MKC 60

Brand:

EAW

Description:

  • EAW MKC50 6,5"+1" 2-way coaxial speaker for installation
  • With an innovative new port design and direct radiating 1″ dome tweeter, MKC50 & MKC60 offer pristine audio output, similar to that of a professional studio monitor
  • Pristine Audio
  • Smaller Package
  • Flexibility Is Key
  • Versatility For
  • A Range Of Applications: Restaurants, Auditoriums, Hotels, Clubs, Bars, Corporate events
  • The enclosures can be deployed in either horizontal or vertical orientations through the use of pan & tilt wall bracket
  • Other deployment options include a ceiling and support for third-party mic stand mount
  • Available as standard in black or white
  • Product is on order

1 piece

€595,00

Monthly payment from: 17,00 €

Downloads:

Specification sheet: EAW MKC60 specification sheet (.pdf)

Specifications


Model: MKC60
Frequency Response​: 70Hz-20kHz
Max SPL: 125dB
Operating Mode: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:

LF – 6,5″ Cone, 1.5″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominal Beamwidth: 110° conical
Power Handling: 250W @ 8ohms
Connections: 1x Neutrik NL4, 2-pin barrier strip
Dimensions: 324 x 208 x 206mm
Weight: 4,9kg

EAW MKC 80

EAW MKC 80

Brand:

EAW

Description:

  • EAW MKC80 8"+1" installation loudspeaker
  • High output, compact coaxial loudspeaker
  • Patented CSA coaxial horn provides superior control, fidelity and output
  • Integrated handle and pole mount
  • Weather protection and transformer options
  • Companion UXA4403 amplifiers
  • Versatile accessories for a vast range of applications
  • Product is on order

1 piece

€890,00

Monthly payment from: 26,00 €

Specifications

Model: MKC80
Frequency Response: 60Hz-20kHz
Max SPL: 132dB
Operating Mode: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:

LF Transducer – 1x8in cone, 2in VC, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominal Beamwidth: 90 x 60 degrees, rotatable
Power Handling: 450W @ 8ohms
Connections: 2x Neutrik NL4, 2-pin barrier strip
Dimensions: 422 x 255 x 267mm
Weight: 10kg

Spec sheet and quick start guide

Specification sheet: EAW MKC80 specification sheet (.pdf)

Behringer 502S

Behringer 502S

Brand:

Behringer

Description:

  • Behringer 502S
  • Ultra-low noise analog mixer for streaming, podcasting and recording
  • Award winning XENYX microphone preamp for warm and musical sound
  • Stereo USB audio interface to connect to your computer or mobile device
  • Direct mixing of PC/gaming sounds into the streaming output
  • Analog mixing and equalization for pure sound
  • Versatile sub mixer for network enabled audio devices
  • Stereo channel 4/5 automatically switches between TRS input and USB playback
  • High-quality main, phones and streaming outputs
  • Stereo RCA inputs assignable to main mix or monitor/phones outputs
  • Product is in stock

 

1 piece

€72,00

Price per piece: 72,00 €

Specifications

Dimensions : 47 x 134 x 177 mm

Weight : 1,2kg

Behringer 802S

Behringer 802S

Brand:

Behringer

Description:

  • Behringer 802S
  • Ultra-low noise analog mixer for streaming, podcasting and recording
  • 2 Award winning XENYX microphone preamps for warm and musical sound
  • Stereo USB audio interface to connect to your computer or mobile device
  • Direct mixing of PC/gaming sounds into the streaming output
  • Analog mixing and equalization for pure sound
  • Versatile sub mixer for network enabled audio devices
  • Stereo channel 7/8 automatically switches between TRS input and USB playback
  • 3-band EQs for warm and musical sound
  • FX send control per channel for external FX processor or monitoring mix
  • High-quality main, monitor, phones and streaming outputs
  • Stereo RCA inputs assignable to main mix or monitor/phones outputs
  • Product is in stock

1 piece

€92,00

Price per piece: 92,00 €

Specifications

Dimensions : 47 x 189 x 220 mm
Weight : 1,6kg

Behringer XM8500

Behringer XM8500

Brand:

Behringer

Description:

  • Behringer XM8500 Dynamic cardioid vocal microphone
  • Dynamic vocal microphone with smooth mid-frequency presence rise for excellent voice projection
  • Ultra-wide frequency response for brilliant and transparent sound
  • Extremely high signal output lets your voice cut through
  • Cardioid characteristic minimizes background noise and feedback
  • Shock mount system to cut down handling noise
  • Integrated spherical wind and pop noise filter
  • Microphone stand adapter and impact-resistant carrying case included
  • Product is in stock

1 piece

€26,00

Price per piece: 26,00 €

Downloads:

  Spec sheet : Behringer XM8500 spec sheet (.pdf)

Specifications

Bandwith: 50Hz - 15kHz

Weight : 0,24kg

Behringer DDM4000

Behringer DDM4000

Brand:

Behringer

Description:

  • Behringer  DDM4000 5-channel DJ mixer
  • 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI
  • 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously
  • 2 microphone inputs with Gain, EQ, Talk function and FX
  • 4 stereo channels with Gain, programmable parametric 3-band EQ with Kill function, fader curve control and flexible crossfader assignment
  • Fully featured MIDI controller for your DJ software
  • Sophisticated sampler with beat-controlled loop function, real-time pitch control, sampler FX and crossfader start option
  • 2 freely assignable and BPM-synchronized, high-quality FX engines (Bitcrusher, Resonator, Reverb, Flanger, etc.)
  • Ultra-fast, and accurate BPM counters for automatic BPM synchronization of sampler, FX, crossfader and external drum machines, etc. via MIDI
  • Digital crossfader with flexible curve adjustment, reverse button and automatic, BPM-synchronized crossfading
  • Dual-mode crossfader with innovative frequency-selective crossfading
  • Dedicated headphones section includes PFL mix/split and bass/snare boost functions
  • Recall your last mixer setting at the push of a button
  • Digital S/PDIF output for direct recording of your performance
  • Rack mount brackets included for ultimate flexibility
  • Product is on order

1 piece

€407,00

Price per piece: 407,00 €

Downloads:

Product information : ProductName Product information (.pdf)
Quick start guide : ProductName Quick start guide (.pdf)

Specifications

Dimensions : 392 x 320 x 110 mm

Weight : 5,6 kg

Shure ULXD24/B58

Shure ULXD24/B58

Brand:

Shure

Description:

  • Shure ULXD24/B58 raadiomikrofoni komplekt
  • ULXD4
  • Digital Predictive Switching Diversity
  • Up to 72 MHz tuning range (region dependent)
  • Optimized scanning automatically finds, and prioritizes the cleanest frequencies to be manually deployed to transmitters over IR sync
  • Bodypack Frequency Diversity ensures uninterrupted audio for mission critical applications
  • Individual gain controls (up to 60 dB), LED meters, and XLR outputs for each channel
  • Ethernet networking for: streamlined frequency coordination and deployment across multiple receivers; compatibility with Wireless Workbench® 6 software for advanced coordination, monitoring, and control
  • Compatible with AMX and Crestron control systems
  • Interference detection and alerts
  • Intuitive front panel LCD menu and controls with various lockout options, plus audio and RF LED meters with peak indicator
  • Removable half wave antennas
  • 24 bit / 48 kHz digital audio
  • 20 Hz – 20 kHz frequency range with flat response
  • Greater than 120 dB dynamic range
  • Up to 22 active transmitters in one 8 MHz TV channel in standard mode; High Density mode enables up to 63 active transmitters in one  8 MHz TV channel
  • AES-256 bit encryption equipped for secure wireless transmission
  • ULXD2 Beta58
  • 30 Hz–20 kHz range with flat frequency response (actual response is microphone dependent)
  • Interchangeable Shure microphone cartridgesAES 256-bit encryption for applications for which secure transmission is needed
  • Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source, eliminating the need for transmitter gain adjustments
  • Shure Lithium-Ion rechargeable battery pack provides over 9 hours of battery life, precision metering in hours and minutes, and zero memory effect
  • External charging contacts for docked charging (with the SBC200 Dual Docking Charger)
  • Backlit LCD with easy to navigate menu and controls
  • Rugged metal construction
  • Frequency and power lockout
  • Product is on order

1 piece

€2 429,00

Monthly payment from: 69,00 €

Behringer Q802USB

Behringer Q802USB

Brand:

Behringer

Description:

  • Behringer Q802 USB Premium ultra-low noise, high headroom analog mixer
  • 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
  • Studio-grade compressors with super-easy ?one-knob? functionality and control LED for professional vocal and instrumental sound
  • Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
  • Neo-classic "British" 3-band EQs for warm and musical sound
  • 1 post fader FX send per channel for external FX devices
  • 1 stereo aux return for FX applications or as separate stereo input
  • Main mix outputs plus separate control room, phones and 2-Track outputs
  • 2-Track inputs assignable to main mix or control room/phones outputs
  • Product is in stock

 

1 piece

€102,00

Price per piece: 102,00 €

Downloads:


Quick start guide : Q802 Quick start guide (.pdf))

Specifications

Dimensions : 195 x 248 x 50 mm

Weight : 1,1kg

TC Helicon Go XLR MIC

TC Helicon Go XLR MIC

Brand:

TC Helicon

Description:

  • TC Helicon GoXLR MIC Professional Broadcast Microphone
    The GoXLR MIC is a streaming enthusiast’s dream come true! With ultra-low-noise design, this professional-quality dynamic microphone is an excellent choice for any broadcasting scenario. The GoXLR MIC provides incredible high-quality performance and is rugged enough to go the distance with a heavy-duty multi-adjustable mount
  • Universally Adjustable
    GoXLR MIC is designed for perfect positioning via a 3-dimensional adjustment mechanism.
    Dual articulation locking joints allow precise control for fine-tuning the position of your mic for any setup. The sliding pop filter height is adjustable via an accessible thumb screw.
  • Why the GoXLR MIC?
    GoXLR MIC doesn’t just look great; it’s a powerful recording tool with an almost flat 50 Hz to 18 kHz frequency response, a highly directional super-cardioid polar pattern, and a high-quality transducer and gold plated XLR output.
  • Accent Rings
    Customize your streaming rig by swapping out the silver anodized ring with one of 9 colored accent rings. Replace the ring color to match your mood, or your streaming room color-scheme. Replacement is very simple – first remove the pop filter, then unscrew the nut from the base of the mic to swap the ring
  • Product is in stock

1 piece

€164,00

Price per piece: 164,00 €

Downloads:


Quick start guide : GoXLR Mic Quick start guide (.pdf)

Specifications

Type: Super-Cardioid
Dynamic Microphone
Frequency response: 50 Hz to 18 kHz
Impedance: 300 Ohms
Connector: Gold-Plated XLR
Sensitivity: -74 db
Weight: 485 g

TC Helicon GO XLR MINI (demo)

TC Helicon GO XLR MINI (demo)

Brand:

TC Helicon

Description:

  • USB audio interface. Mixer for livestreaming
  • GoXLR Mini is an intuitive all-in-one audio interface for live streamers and content creators
  • Designed specifically for an online creator’s workflow
  • GoXLR Mini establishes multiple USB audio devices in Windows so you can control your app volumes individually
  • Award-winning Midas preamps are quiet and versatile—perfect for any voice and microphone.
  • Whether you’re an established creator with a multi-PC setup, or just getting started, GoXLR Mini has all the inputs and outputs to grow with you
  • Product is in stock

1 piece

€170,00

Price per piece: 170,00 €

Downloads:


Quick start guide: TC Helicon GO XLR MINI Quick start guide (.pdf)

Specifications


Dimensions : 70 x 132 x 168mm

Weight : 0,68kg

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

1 piece

€175,00

1 piece

€175,00

Price per piece: 175,00 €

Shure WL185 lavalier microphone

Shure WL185 lavalier microphone

Brand:

Shure

Description:

  • Shure WL185 Cardioid TQG Lavalier Microphone
  • Suitable for Shure bodypack
  • Product is in stock

 

1 piece

€175,00

Price per piece: 175,00 €

Specifications

Type: Condenser (electret bias)
Frequency Response: 50 to 17,000  Hz
Output Impedance: 1800  Ω
Sensitivity [1]: WL185     -45.5  dBV/Pa
Maximum SPL: WL185     130.5  dB SPL
Self Noise (A-Weighted): WL185     28.0  dB SPL
Dynamic Range: 102.5  dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter

Shure SLXD14/SM35

Shure SLXD14/SM35

Brand:

Shure

Description:

  • Shure SLXD14/SM35 Digital Wireless Receiver with bodypack and headset microphone
  • Transparent 24-bit digital audio
  • Extended 20 Hz to 20 kHz frequency range (microphone dependent)
  • 120 dB dynamic range
  • Digital predictive switching diversity
  • 44 MHz tuning bandwidth (region dependent)
  • 32 available channels per frequency band (region dependent)
  • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
  • Easy pairing of transmitters and receivers over IR scan and sync
  • Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
  • Interchangeable microphone capsules
  • Rugged metal construction
  • Bodypack transmitter
  • Durable cardioid condenser microphone in a comfortable headset for hands-free vocal performance. Ideal for multi-instrumentalists
  • Product is on order

 

1 piece

€798,00

Monthly payment from: 23,00 €

Specifications

SM35 specs

Type Electret Condenser
Frequency Response 40 Hz to 20,000 Hz
Polar Pattern Unidirectional (Cardioid)
Output Impedance @ 1 kHz: 2400 Ω
Audio Output Level -59.0 dBV/Pa
Signal-To-Noise Ratio[1] @ 1 kHz: 55 dB
Maximum SPL[1] 1000 Ω load, @ 1% THD: 153.0 dB
Dynamic Range[1] @ 1 kHz, 1000 Ω load:114.0 dB
Equivalent Output Noise[1] Typical, A-Weighted: 39 dB
Power Requirements +5 V DC (nominal), 10 V maximum (DC bias)
Polarity Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
Cable 1.1 m
Connector TA4F
Net Weight 72 g

Behringer RX1602 V2

Behringer RX1602 V2

Brand:

Behringer

Description:

  • Behringer RX1602 V2 Extremely flexible multi-purpose sub-mixer, multi-track monitoring mixer and level translator
  • 16 balanced high-headroom line inputs for individual stereo or mono use of each section
  • Ultra-low noise ULN design, highest possible headroom, ultra-transparent audio
  • Dedicated balance and level controls plus +4/-10 level selection per channel
  • Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
  • Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
  • Monitor/FX signal assignable to phones output for added flexibility
  • Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
  • 1/4'' TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
  • High-quality detented rotary controls for long-term reliability
  • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
  • Product is in stock

1 piece

€138,00

Price per piece: 138,00 €

Downloads:


Quick start guide : Behringer RX1602 V2 Quick start guide (.pdf)

Specifications

Dimensions : 44 x 483 x 149 mm

Weight : 1,8kg

Behringer QX2222USB

Behringer QX2222USB

Brand:

Behringer

Description:

  • Behringer QX2222 Premium ultra-low noise, high headroom mixer
  • 8 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
  • 8 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
  • Ultra-high quality Klark Teknik FX processor with LCD display, dual-parameters, Tap function and storable user parameter settings
  • "Wireless-ready" for high-quality Behringer digital wireless system (not included)
  • Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
  • Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound
  • Channel inserts on each mono channel for flexible connection of outboard equipment
  • 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
  • Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
  • 2 subgroups with separate outputs for added routing flexibility; 3 multi-functional stereo aux returns with flexible routing
  • Balanced main mix outputs with ?" jack and gold-plated XLR connectors, separate control room, headphones and stereo rec outputs
  • Control room/phones outputs with multi-input source matrix; rec inputs assignable to main mix or control room/phones outputs
  • Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
  • Product is on order

1 piece

€346,00

Price per piece: 346,00 €

Downloads:


Quick start guide : Behringer QX2222USB Quick start guide (.pdf)

Specifications

Dimensions : 430 x 370 x 90mm

Weight : 4,8 kg

Behringer DI800 V2

Behringer DI800 V2

Brand:

Behringer

Description:

  • Behringer DI800V2 8-channel di-box
  • Professional and multi-purpose 8-channel direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to servo-balanced operation
  • Optional mains or phantom-powered operation
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • +20 dB gain switch for pre-amplification of low-level signals
  • Switchable input attenuation allows input levels of up to +40 dB
  • Ground Lift switch eliminates typical ground loop problems
  • Link output for easy connection to further equipment
  • 1/4" TRS and gold-plated XLR connectors
  • Illuminated switches enable perfect operation in dark stage environments
  • Product is in stock

1 piece

€160,00

Price per piece: 160,00 €

Downloads:


Quick start guide : Behringer DI800V2 Quick start guide (.pdf)

Specifications

Dimensions : 44 x 134 x 483 mm

Weight : 1,8kg

SHURE SLXD14E/85 H56

SHURE SLXD14E/85 H56

Brand:

Shure

Description:

  • Shure SLXD14/85 wireless system
  • Including bodypack transmitter and lavalier microphone
  • Featuring the WL185 Cardioid Lavalier Microphone and the SLXD1 transmitter
  • The SLXD14/85 provides transparent digital audio and rock-solid RF stability for lecture halls and live performances.
  • Product is on order

 

1 piece

€819,00

Monthly payment from: 24,00 €

Behringer DI4000 V2

Behringer DI4000 V2

Brand:

Behringer

Description:

  • Behringer DI4000 V2 Professional and multi-purpose 4-channel direct injection box for stage and studio applications
  • Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
  • Ultra-flat frequency response due to renowned Behringer OT-1 transformers
  • Allows direct connection to speaker outputs with up to 3,000 Watts
  • +20 dB gain switch for pre-amplification of low-level signals
  • Switchable input attenuation allows input levels of up to +40 dB
  • Phase Reverse switch allows you to instantly correct phase problems
  • Switchable High-cut filter (8 kHz) for guitar applications
  • Ground Lift switch eliminates typical ground loop problems
  • Accurate 8-segment LED level meter for optimum performance
  • 1/4" TRS and gold-plated XLR connectors
  • Illuminated switches enable perfect operation in dark stage environments
  • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
  • Product is in stock

1 piece

€163,00

Price per piece: 163,00 €

Downloads:


Quick start guide : Behringer DI4000 V2 Quick start guide (.pdf)

Specifications


Dimensions : 483 x 136 x 44mm
Weight : 2,1kg

Behringer VOCODER VC340

Behringer VOCODER VC340

Brand:

Behringer

Description:

  • Behringer VC340 Authentic analog Vocoder, Human Voice and Strings sounds from the '80s
  • Vocoder sounds that wrote musical history and inspired some of the most famous artists and bands
  • Microphone input to modulate any audio signal
  • Multiple-stage Chorus based on legendary BBD (Bucket Brigade Delay) technology
  • 37 semi-weighted full-size keys featuring velocity sensitivity
  • 32 sliders and switches to give you direct and real-time access to all important parameters
  • Comprehensive USB/MIDI implementation for connection to keyboard/sequencers
  • Product is on order

1 piece

€567,00

Monthly payment from: 17,00 €

Downloads:


Quick start guide : Behringer VC340 Quick start guide (.pdf)

Specifications


Dimensions : 649 x 257 x 103mm
Weight : 6,6kg

Midas DN4816-I

Midas DN4816-I

Brand:

Midas

Description:

  • Midas DN4816-I Bus-Powered StageCONNECT Interface with 16 Analog Inputs and Dual Ultranet Outputs
  • Breakout box with 16 balanced XLR line inputs for StageConnect and Behringer Ultranet systems
  • Can be used as analogue input box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers such as P16 personal monitoring mixers
  • StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
  • Two units can be cascaded for a total of 32 low-latency analogue line inputs feeding the StageConnect bus
  • Flexible connectivity on stage and between side racks using any balanced microphone cable
  • Supports bi-directional audio configurations, with control data and 12 VDC / 18 W remote power
  • Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
  • Slave mode for use with StageConnect-enabled mixing consoles, stageboxes and hubs
  • Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect bus and from analogue inputs
  • External power supply for standalone use and offering remote power on the StageConnect Master output
  • Product is available for preorder

1 piece

€396,00

Price per piece: 396,00 €

Downloads:


Quick start guide : Midas DN4816-I Quick start guide (.pdf)

Specifications


Dimensions : 483 x 169 x 49mm
Weight : 2,2kg

Midas DN4816-O

Midas DN4816-O

Brand:

Midas

Description:

  • Breakout box with 16 balanced XLR line out for StageConnect and Behringer Ultranet systems
  • Analog output box for other StageConnect devices, Midas HUB4 and Behringer WING or Ultranet transmitters such as Midas MR18/M32 and DL16/DL32 stageboxes
  • StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
  • Two units can be cascaded for a total of 32 low-latency analogue outputs fed from a single StageConnect source
  • Flexible connectivity on stage and between side racks using any balanced microphone cable
  • Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
  • Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
  • Operates in Master mode, or as Slave synchronised to StageConnect or Ultranet input streams
  • Ultranet output for feeding Turbosound iQ speaker systems and Behringer P16 personal monitoring directly from StageConnect bus
  • External power supply for standalone use and offering remote power on the StageConnect Master output
  • Product is on order

1 piece

€374,00

Price per piece: 374,00 €

Downloads:

Quick start guide : Midas DN4816-O Quick start guide (.pdf)

Specifications


Dimensions : 483 x 169 x 49mm
Weight : 2,2kg

Spec sheet and quick start guide


Mõõdud : 483 x 169 x 49mm
Kaal : 2,2kg

KLARK TEKNIK DN4816U

KLARK TEKNIK DN4816U

Brand:

Klark Teknik

Description:

  • KLARK TEKNIK DN4816U Bus-Powered StageCONNECT Interface Bridge with Multi-Channel USB I/O and Behringer Ultranet I/O
  • DI Box sized interface for connecting StageConnect devices to Behringer Ultranet systems and USB multi-channel audio
  • StageConnect 32-channel audio transmission at sub-milisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz, using standard XLR microphone or DMX cable
  • Asynchronous 32-channel sample rate conversion allows connecting different clock domains and sample rates with 0.4 ms latency and 140 dB dynamic range
  • Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
  • Master and Slave ports allow exchanging multi-channel audio with a chain of other StageConnect devices
  • Can be used for sending StageConnect or USB signals to P16 personal monitoring mixers or Turbosound iQ speakers  Behringer Ultranet signals can be converted to StageConnect or USB streams
  • Slave mode for use with StageConnect enabled mixing consoles, stageboxes and hubs
  • External power supply for stand-alone use and offering remote power on the StageConnect Master output
  • Product is on order

1 piece

€204,00

Price per piece: 204,00 €

Downloads:


Quick start guide : KLARK TEKNIK DN4816U Quick start guide (.pdf)

Specifications

 

Dimensions : 118 x 112 x 63mm
Weight : 0,71kg

Midas DN4888

Midas DN4888

Brand:

Midas

Description:

  • Midas DN4888 Breakout box with 8 balanced XLR line in and 8 balanced XLR line out for StageConnect systems
  • Can be used as analogue I/O box for other StageConnect devices, Turbosound iQ speakers or Behringer WING and Ultranet receivers, such as P16 personal monitoring mixers
  • StageConnect 32-channel audio transmission at sub-millisecond latency, 24-Bit uncompressed PCM, 44.1/48 kHz using standard XLR microphone or DMX cable
  • Allows cascading with other StageConnect boxes, such as DN4816-I and DN4816-O for more analogue inputs and outputs
  • Flexible connectivity on stage and between side racks using any balanced microphone cable
  • Supports bi-directional audio configurations, with control data and 12 VDC/18 W remote power
  • Master mode allows exchanging multichannel audio with a chain of other StageConnect devices
  • Slave modes offer 8x8 or 16x8 channel configurations to be used with StageConnect-enabled mixing consoles, stage boxes and hubs
  • Dual Ultranet outputs for feeding Behringer P16 personal monitoring and Turbosound iQ speaker systems directly from StageConnect and analogue inputs
  • External power supply for standalone use and offering remote power on the StageConnect Master output
  • Product is available for preorder

1 piece

€319,00

Price per piece: 319,00 €

Downloads:


Quick start guide : Midas DN4888 Quick start guide (.pdf)

Specifications


Dimensions : 483 x 169 x 49mm
Weight : 2,2kg

Midas Heritage-D HD96-24 TP

Midas Heritage-D HD96-24 TP

Brand:

Midas

Description:

  • Midas Heritage-D HD-96-TP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
  • 120 time-aligned and phase-coherent mix buses
  • 21" full colour TFT display screen with capacitive touch sensing
  • Advanced and multi-gesture touchscreen user interface
  • Award-winning Midas microphone preamplifiers
  • HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
  • Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
  • 24 VCA (variable control association) groups, and unlimited POPulation groups
  • Up to 24 multi-channel digital signal processing effects engines
  • Integrated Wireless transceiver module
  • Dual ULTRANET Ports providing 32 additional digital outputs
  • 28 Midas PRO motorised 100 mm faders
  • Fully interpolated touch sensitive controls
  • Dual redundant auto-ranging universal switch-mode power supplies
  • Product is on order

Midas HD-96-TP digital touring consoleMidas HD-96-TP frontMidas HD-96-TP leftMidas HD-96-TP rightMidas Heritage-D HD-96-TP rear

 

1 piece

€39 500,00

Monthly payment from: 1 118,00 €

Specifications


Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg

Klark Teknik DM TCE-EU

Klark Teknik DM TCE-EU

Brand:

Klark Teknik

Description:

  • Klark Teknik DM TCE-EU 2.3" colour touch screen controller
  • User programmable encoder and button
  • POE powered device
  • Support for multiple pages and controls from DM series devices
  • Single gang EU size
  • Black and white single gang trim plates and encoder knobs included
  • Programmable using DM KONTROL application
  • Product is on order

1 piece

€245,00

Price per piece: 245,00 €

Downloads:


Quick start guide : Klark Teknik DM TCE-EU Quick start guide (.pdf)

Specifications


Dimensions : 86,36 x 86,36 x 53,75mm
Weight : 0,16kg

Klark Teknik CP8000EU

Klark Teknik CP8000EU

Brand:

Klark Teknik

Description:

  • Klark Teknik CP8000EU Wall plate remote control for DM8000
  • Volume control may be assigned to either auxiliary input section or main mix bus
  • Selection of auxiliary inputs 1-6
  • All Illuminated, soft touch controls powered remotely from DM8000
  • Use CAT5/6 or any 5 conductor cable for connection distances up to 300 feet (100 m)
  • Compact, single gang format allows use with low voltage trim rings and most standard depth enclosures
  • Generous space provided for input labeling
  • Discrete appearance matches any decor
  • Product is on order

1 piece

€56,00

Price per piece: 56,00 €

Downloads:


Quick start guide : Klark Teknik CP8000EU Quick start guide (.pdf)

Specifications


Dimensions : 80 x 80 x 36mm
Weight : 0,07kg

Midas Heritage-D HD96-24 IP

Midas Heritage-D HD96-24 IP

Brand:

Midas

Description:

  • Midas Heritage-D HD-96-IP Live performance digital control centre with up to 144 simultaneous input channels and 96 kHz sample rate
  • 120 time-aligned and phase-coherent mix buses
  • 21" full colour TFT display screen with capacitive touch sensing
  • Advanced and multi-gesture touchscreen user interface
  • Award-winning Midas microphone preamplifiers
  • HyperMAC and AES50 networking allows up to 576 inputs and 576 outputs @ 96 kHz sample rate
  • Dual network bridge format converter with up to 128 bidirectional channels and asynchronous sample rate conversion
  • 24 VCA (variable control association) groups, and unlimited POPulation groups
  • Up to 24 multi-channel digital signal processing effects engines
  • Integrated Wireless transceiver module
  • Dual ULTRANET Ports providing 32 additional digital outputs
  • 28 Midas PRO motorised 100 mm faders
  • Fully interpolated touch sensitive controls
  • Dual redundant auto-ranging universal switch-mode power supplies
  • Product is on order

Midas HD-96-TP frontMidas HD-96-TP leftMidas HD-96-TP rightMidas Heritage-D HD-96-TP rear

1 piece

€37 500,00

Monthly payment from: 1 061,00 €

Downloads:


Quick start guide : Midas Heritage-D HD-96 Quick start guide (.pdf)

Specifications


Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Dimensions : 1028 x 719 x 352 mm
Weight : 43,2kg

Klark Teknik DF1000

Klark Teknik DF1000

Brand:

Klark Teknik

Description:

  • Klark Teknik DF1000 Dual-channel feedback suppression processor designed for fully automatic and zero-configuration setup
  • Offers up to 10 dB increase in system gain
  • Instantly detects and stops acoustic feedback. Highly effective with both speech and music
  • Ultra-fast and highly accurate DSP selects and applies up to 32 filters per channel
  • Two fully independent audio channels to process stereo or separate zone signals
  • Extremely narrow filters (up to 1/30th octave) to retain overall signal integrity
  • Front panel control featuring suppression and filter reset buttons
  • Two balanced/unbalanced inputs on combination line level XLR/TRS and 3-pin Euroblock connectors
  • Auto-ranging universal switch-mode power supply
  • Product is on order

1 piece

€205,00

Price per piece: 205,00 €

Downloads:


Quick start guide : Klark Teknik DF1000 Quick start guide (.pdf)

Specifications


Dimension : 483 x 296 x 50 mm
Weight : 2,9kg

Klark Teknik KT-DANTE64

Klark Teknik KT-DANTE64

Brand:

Klark Teknik

Description:

  • Klark Teknik KT-DANTE Audinate Dante* network module for Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
  • Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
  • Enables multichannel recording and playback through Dante Virtual Soundcard (PC or Mac* computer)
  • Primary and secondary Ethernet interfaces for dual-redundant Dante networking
  • Operates from internal Dante network Precision Time Protocol (PTP) clock or external clock via host unit
  • Optional Dante Controller software for remote configuration (PC or Mac computer)
  • LED indicators monitor network activity and speed
  • Product is on order

1 piece

€793,00

Monthly payment from: 23,00 €

Klark Teknik KT-MADI

Klark Teknik KT-MADI

Brand:

Klark Teknik

Description:

  • Klark Teknik KT-MADI MADI (AES10-compliant) network module with up to 64 bidirectional channels @ 48 kHz and 32 bidirectional channels @ 96 kHz
  • Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
  • Operates up to 500 m over optical fibre link and 200 m over coaxial copper link
  • Optical transmission on SC-Duplex* connector
  • Copper transmission on 75 ohm coaxial BNC connectors
  • Dual-redundant operation with failover from optical to copper connections
  • Operates as either MADI clock master, MADI clock slave or from external clock via host unit
  • Product is on order

1 piece

€352,00

Price per piece: 352,00 €

Klark Teknik KT-USB

Klark Teknik KT-USB

Brand:

Klark Teknik

Description:

  • Klark Teknik KT-USB USB 2.0 network module with up to 48 bidirectional channels @ 48 kHz and 24 bidirectional channels @ 96 kHz
  • Compatible with Klark Teknik DN9650 and DN9652 network bridges and Midas NEUTRON-NB expansion module
  • Simultaneous computer audio recording and playback
  • LED indication of sample rate
  • Windows* software driver available at klarkteknik.com
  • Product is on order

1 piece

€345,00

Price per piece: 345,00 €

Specifications


Connectors

USB 1 x USB 2.0, type B
Input/Output Characteristics
Channels of input/output @ 48kHz 48, bidirectional
Channels of input/output @ 96kHz 24, bidirectional
Sample rates 48 kHz/96 kHz
Sample word length 24 bit
Clock synchronization selectable DN9650 unit
Latency Platform/implementation dependent

Klark Teknik DM8500

Klark Teknik DM8500

Brand:

Klark Teknik

Description:

  • Klark Teknik DM8500 Networked open architecture digital audio processor
  • 64 x 64 channel, dual-redundant Dante*/AES67 audio transport
  • 10 high-headroom analogue mic/line inputs
  • 6 electronically balanced, low impedance line level outputs
  • 24 channels of freely assignable Acoustic Echo Cancellation
  • 16 channel ULTRANET audio output bus
  • Class-compliant USB connection for integration with soft codec conferencing applications
  • System configuration and control via ethernet
  • Embedded HTML engine to serve custom control pages
  • Integrated control modules for Lab Gruppen D series and Lucia amplifiers
  • Embedded media engine for audio playback and recording
  • RS232 connector for interfacing with 3rd party control systems
  • 6 user-configurable general purpose input output connections (GPIO)
  • Auto-ranging universal power supply
  • Product is on order

1 piece

€2 229,00

Monthly payment from: 64,00 €

Downloads:


Quick start guide : Klark Teknik DM8500 Quick start guide (.pdf)

Specifications


Dimensions : 483 x 293 x 44mm
Weight : 3,6 kg

Klark Teknik DN9652

Klark Teknik DN9652

Brand:

Klark Teknik

Description:

  • Klark Teknik DN9652 Dual network bridge format converter with up to 64 bidirectional channels
  • Compatible with Klark Teknik KT-AES50, KT-DANTE64, KT-MADI and KT-USB network modules
  • Bidirectional Asynchronous Sample Rate Conversion on every channel with bypass facility
  • Bidirectional output audio clock inhibit feature for redundant network systems
  • 24 bit audio operation with 96 kHz and 48 kHz sample rates
  • Video synchronisation in standard and high definition formats
  • Internal "AES Grade 1" temperature-compensated word clock (1 ppm)
  • Internal web server allows browser-based configuration via Ethernet control port
  • Status indicator LEDs and LCD display on front panel
  • Features Neutrik etherCON* network ports
  • Rugged 1U rackmount chassis for durability in portable applications
  • Auto-ranging universal switch-mode power supply
  • Product is on order

1 piece

€1 565,00

Monthly payment from: 45,00 €

Downloads:


Quick start guide : Klark Teknik DN9652 Quick start guide (.pdf)

Specifications


Dimensions : 482 x 410 x 44,5mm
Weight : 5,5 kg

Klark Teknik DN9650

Klark Teknik DN9650

Brand:

Klark Teknik

Description:

  • Klark Teknik DN9650 Network bridge format converter for AES50 networks with up to 64 bidirectional channels
  • Compatible with Klark Teknik KT-AES50, KT-DANTE64, KT-MADI and KT-USB network modules
  • Asynchronous sample rate conversion on every channel with bypass facility
  • Bidirectional output audio clock inhibit feature for redundant network systems
  • 24 bit audio operation with 96 kHz and 48 kHz sample rates
  • Video synchronisation in standard and high definition formats
  • Internal "AES Grade 1" temperature-compensated word clock (1 ppm)
  • Internal web server allows browser-based configuration via Ethernet control port
  • Status indicator LEDs and LCD display on front panel
  • Features Neutrik etherCON* network ports
  • Rugged 1U rackmount chassis for durability in portable applications
  • Auto-ranging universal switch-mode power supply
  • Product is on order

1 piece

€2 149,00

Monthly payment from: 61,00 €

Downloads:


Quick start guide : Klark Teknik DN9650 Quick start guide (.pdf)

Specifications


Dimensions : 482 x 410 x 44,5mm
Weight : 5,5 kg

Behringer UV1

Behringer UV1

Brand:

Behringer

Description:

  • Behringer UV1 pristine Midas-designed preamplifier for all microphone and line-level sources
  • Perfectly matches your studio, live and pro recording environment
  • High-quality mic processor allows you to optimize your recordings
  • Audiophile 192 kHz USB audio interface to connect directly to your computer
  • Flexible Compressor for "inaudible" level control and creative sound processing
  • Effective De-esser for quick removal of excessive sibilance from your vocal track
  • Integrated dynamic Enhancer adds high frequencies, lost through compression
  • True RMS expander for extremely smooth noise reduction
  • Send and Return connectors allow you to add external processors
  • Input/playback mix control to balance between direct monitor and USB playback signal
  • Accurate LED metering for level and processing indication
  • Inputs and outputs on ¼" TRS, XLR and Combo connectors
  • Illuminated switches ensure perfect operation in dark stage and studio environments
  • Internal switch-mode power supply (100 - 240 V~) for noise-free audio and low power consumption
  • Product is in stock

1 piece

€181,00

Price per piece: 181,00 €

Downloads:


Quick start guide : Behringer UV1 Quick start guide (.pdf)

Specifications


Dimensions : 483 x 150 x 44mm
Weight : 1,5kg
USB
Type USB 2.0, type B
Interface 2 in / 2 out
Converter 24-bit
Sample rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
Supported operating systems Windows 10 / Mac OS X 10.4 or higher
Drivers Windows driver available on behringer.com,
no drivers needed for Mac

Lab gruppen FAD602

Lab gruppen FAD602

Brand:

Lab gruppen

Description:

  • Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€435,00

Price per piece: 435,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD1202

Lab gruppen FAD1202

Brand:

Lab gruppen

Description:

  • Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€485,00

Price per piece: 485,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen FAD2402

Lab gruppen FAD2402

Brand:

Lab gruppen

Description:

  • Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
  • Direct drive, constant power technology for superior audio performance and reliability
  • Dante* audio connectivity to enable creating large audio systems over a local network
  • Energy Star* certified design conserves energy and drastically reduces operational cost
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Tamperproof gain controls for each channel on rear panel location
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type amplifier output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Comprehensive fail safe circuit protection ensures continued operation
  • Product is on order

1 piece

€532,00

Monthly payment from: 16,00 €

Specifications


Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg

Lab gruppen CMA1201

Lab gruppen CMA1201

Brand:

Lab gruppen

Description:

  • Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
  • Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
  • 4 mic/line inputs with individual volume controls
  • Energy efficient design conserves energy and reduces
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • Direct drive, constant power technology for superior audio performance and reliability
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
  • Front panel power control button for direct access
  • Aux output for expansion to additional amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Convection-cooled, fan-less amplifier technology for low noise
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Specifications

Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

 

Lab gruppen CM82

Lab gruppen CM82

Brand:

Lab gruppen

Description:

  • Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
  • 8 mic/line inputs with individual volume controls and output routing
  • Individual front panel master volume and bass/treble controls for each output
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, 19" enclosure with brackets for rack mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€344,00

Price per piece: 344,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 437 x 248 x 44mm
Weight : 2,4kg

Lab gruppen CM41

Lab gruppen CM41

Brand:

Lab gruppen

Description:

  • Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
  • 4 mic/line inputs with individual volume controls
  • Individual front panel master volume and bass/treble controls
  • Configurable priority muting function for background music override
  • GPI remote volume control using standard RJ-45 connector and Ethernet cable
  • Front panel power control button for direct access
  • Aux output for expansion to connect with amplifiers
  • Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
  • Euroblock type mic/line input and output connectors
  • Product is on order

1 piece

€272,00

Price per piece: 272,00 €

Downloads:


Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)

Specifications


Dimensions : 299 x 218 x 44mm
Weight : 2,1kg

Lab gruppen IPX1200

Lab gruppen IPX1200

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 180,00

Monthly payment from: 34,00 €

Downloads:


Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo  300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg

Lab gruppen IPX2400

Lab gruppen IPX2400

Brand:

Lab gruppen

Description:

  • Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
  • Low mains current draw with proven IDEEA technology for power conservation
  • Highly advanced DSP with 40 real-time multi-slope Parametric EQs
  • 100 user presets for system configuration and setup
  • Networked control via touchscreen user interface
  • AES3 and analogue inputs with redundant failover
  • Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
  • 4-channel input mixer for multi-input mixing and switching
  • Backlit display with navigation buttons and encoder for front panel setup
  • Horizontal output VU meters on display in operating mode
  • Binding post and Neutrik speakON* connectors
  • Universal power supply supports 100 - 240 V at 50 or 60 Hz
  • Fast network setup with auto-discovery and identification of amplifiers
  • Product is on order

1 piece

€1 496,00

Monthly payment from: 43,00 €

Downloads:


Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo  800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo  600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg

Lab gruppen E 12:2

Lab gruppen E 12:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€1 479,00

Monthly payment from: 42,00 €

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W

Lab gruppen E 40:4

Lab gruppen E 40:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
    4  x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 790,00

Monthly payment from: 79,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 20:4

Lab gruppen E 20:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

 

1 piece

€2 649,00

Monthly payment from: 75,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications

Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 10:4

Lab gruppen E 10:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€2 090,00

Monthly payment from: 60,00 €

Downloads:


Quick start guide : Lab gruppen E-series Quick start guide (.pdf)

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg

*See spec sheet for details

Lab gruppen E 5:4

Lab gruppen E 5:4

Brand:

Lab gruppen

Description:

  • Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 890,00

Monthly payment from: 54,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg

Lab gruppen E 2:2

Lab gruppen E 2:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€899,00

Monthly payment from: 26,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 8:2

Lab gruppen E 8:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 379,00

Monthly payment from: 40,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen E 4:2

Lab gruppen E 4:2

Brand:

Lab gruppen

Description:

  • Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Product is on order

1 piece

€1 090,00

Monthly payment from: 31,00 €

Specifications


Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg

Lab gruppen PD3000

Lab gruppen PD3000

Brand:

Lab gruppen

Description:

  • Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
  • Precise power management guarantees performance and efficiency
  • Proven and reliable Class-D amplifier stage
  • Highly efficient Switch Mode Power Supply (SMPS)
  • Speaker Protect Limiter for maximum level output and reliable driver protection
  • Accurate 8-segment Signal and Limit LEDs for performance monitoring
  • Integrated crossover with low-cut, high-cut and full range mode
  • Comprehensive circuit protection against short circuits, DC and thermal overload
  • Balanced XLR and TRS input connectors with optimised sensitivities
  • Professional speakON* output connectors
  • Efficient cooling with temperature-controlled fan
  • Rugged and lightweight rack mount chassis for maximum durability
  • Product is on order

1 piece

€855,00

Monthly payment from: 25,00 €

Downloads:


Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)

Specifications


2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg

Midas DL231

Midas DL231

Brand:

Midas

Description:

  • Midas DL231 has 2 award-winning Midas microphone preamplifiers per input with switchable +48 V phantom power
  • 2 dual redundant AES50 network ports with independent phase-locked loop synchronisation
  • 24 electronically balanced output channels can be sourced from microphone preamplifiers or AES50 ports
  • Remote operation up to 100 m via CAT5/5e cable
  • Selectable 96 kHz or 48 kHz sample rate operation
  • All settings programmable from front panel controls or console
  • PSU status indicator LEDs and configuration LCD display on front panel
  • MIDI In, Out and Thru connectors
  • Features Neutrik etherCON* AES50 network ports
  • Rugged 5U rackmount chassis for durability in portable applications
  • Dual redundant auto-ranging universal switch-mode power supplies
  • Product is on order

1 piece

€4 990,00

Monthly payment from: 142,00 €

Downloads:


Quick start guide : Midas DL231 Quick start guide (.pdf)

Specifications

Dimensions : 5U 410mm deep

Weight : 15kg

Behringer SD251-CK

Behringer SD251-CK

Brand:

Behringer

Description:

  • Behringer SD251-CL professional studio-grade monitoring earphones
  • Dynamic micro-driver provides wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
  • Sound-isolating design blocks outside noise for detailed musical experience
  • Secure, over-the-ear cable design ensures in-ear stability and comfort
  • Optimized performance with exceptional sound quality for use with a wide range of audio devices
  • 63 inch (160 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
  • Zipper case included to enjoy your music on-the-go
  • Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
  • Product is in stock

1 piece

€39,50

Price per piece: 39,50 €

Downloads:


Quick start guide : Behringer SD251 Quick start guide (.pdf)

Specifications

Driver: 6.8 mm
Impedance: 22 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @ 1 kHz (105 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Connector: MMCX connector, detachable
Cable: 1.6 m (63")
Plug: 3.5 mm, stereo
Adapter: 6.3 mm, gold plated

Behringer SD251-CL

Behringer SD251-CL

Brand:

Behringer

Description:

  • Behringer SD251-CL professional studio-grade monitoring earphones
  • Dynamic micro-driver provides wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
  • Sound-isolating design blocks outside noise for detailed musical experience
  • Secure, over-the-ear cable design ensures in-ear stability and comfort
  • Optimized performance with exceptional sound quality for use with a wide range of audio devices
  • 63 inch (160 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
  • Zipper case included to enjoy your music on-the-go
  • Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
  • Product is in stock

1 piece

€39,50

Price per piece: 39,50 €

Downloads:


Quick start guide : Behringer SD251 Quick start guide (.pdf)

Specifications

Driver: 6.8 mm
Impedance: 22 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @ 1 kHz (105 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Connector: MMCX connector, detachable
Cable: 1.6 m (63")
Plug: 3.5 mm, stereo
Adapter: 6.3 mm, gold plated

Behringer MO240

Behringer MO240

Brand:

Behringer

Description:

  • Behringer MO240 Professional studio-grade monitoring earphones
  • Single dynamic and single balanced armature micro-drivers delivering full bass and detailed highs
  • Ultra-linear frequency response from 20 Hz to 20 kHz
  • Sound-isolating design blocks outside noise for detailed musical experience
  • Secure over-the-ear cable design ensures in-ear stability and comfort
  • Optimized performance with exceptional sound quality for use with a wide range of audio devices
  • 59 inch (150 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
  • Zipper case included to enjoy your music on-the-go
  • Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
  • Product is on order

1 piece

€41,50

Price per piece: 41,50 €

Downloads:


Quick start guide : Behringer MO240 Quick start guide (.pdf)

Specifications

Driver: Dynamic and balanced armature
Crossover frequency: 500 Hz
Impedance: 32 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @1kHz (102 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Cable: Shielded, detachable
Connector:MMCX connector
Cable length: 1.5 m (59")
Plug: 3.5 mm, stereo
Adapter 6.3 mm, gold plated

Klark Teknik DS20

Klark Teknik DS20

Brand:

Klark Teknik

Description:

  • Klark Teknik DS20 Line level splitter sends single input signal to 2 outputs
  • Custom-built Midas transformer for highest signal integrity
  • High headroom design offers superior sound quality
  • Passive design does not require any power supply
  • High quality Neutrik* XLR connectors
  • Earth Lift switches for each output eliminates ground loop problems
  • Fully transformer-isolated design ensures electrical separation
  • Ultra-low noise and ultra-linear system for highest signal integrity
  • Aluminium extrusion casing with protective rubber corners
  • Compact and rugged design
  • Product is in stock

1 piece

€53,00

Price per piece: 53,00 €

Downloads:


Quick start guide : Klark Teknik DS20 Quick start guide (.pdf)

Specifications


Dimension : 118 x 120 x 64 mm
Weight : 0,6kg
Dynamic range +124 dB
THD+N < 0.03 % @ 1 kHz, +4 dBu
S/N ratio > 100 dB @ +4 dBu

Behringer BC1500

Behringer BC1500

Brand:

Behringer

Description:

  • Behringer BC1500 High-performance set of 7 microphones tuned and matched to capture every nuance of a full drum kit
  • Complete collection of premium drum microphones, ideal for studio recordings and live performances
  • 1 premium large diaphragm dynamic microphone specially designed for bass drum and low frequency instruments
  • 4 dynamic percussion microphones for snare, toms and other acoustic percussive instruments
  • 2 matched condenser microphones for overhead stereo drum imaging with switchable low-frequency roll-off
  • Cardioid polar pattern for outstanding sound source separation
  • Rugged, reliable metal die-cast body construction
  • Compact and versatile microphones make it suitable for precision and close mic recordings
  • Gold-plated 3-pin XLR output connector for highest signal integrity
  • Microphone clamps, 5/8” threaded adapters, windscreen and aluminum carry case included
  • Product is on order

1 piece

€186,00

Price per piece: 186,00 €

Specifications









  Tom mic Bass Drum mic Cymbal mic
Type Dynamic Dynamic Condenser
Polar pattern  Uni-directional  Uni-directional Cardioid
Frequency response 50 Hz - 14 kHz 50 Hz - 14 kHz 50 Hz - 18 kHz
Sensitivity -55 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa -52 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/P -42 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa
Power supply N/A N/A 9-52 V phantom power
Max. SPL 145 dB @ 1 kHz ≤1% THD 150 dB @ 1 kHz ≤1% THD 136 dB @ 1 kHz ≤1% THD
S/N ratio 75 dB 79 dB  70dB
0