Lab gruppen FAD602
Brand:
Lab gruppenDescription:
- Labgruppen FAD602 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€435,00
Price per piece: 435,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 60W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD1202
Brand:
Lab gruppenDescription:
- Labgruppen FAD1202 2 x 120 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€485,00
Price per piece: 485,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen FAD2402
Lab gruppen FAD2402
1 piece
€532,00
1 piece
€532,00
Lab gruppen FAD2402
Brand:
Lab gruppenDescription:
- Labgruppen FAD2402 2 x 240 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
- Product is on order
1 piece
€532,00
Monthly payment from: 16,00 €
Downloads:
Quick start guide : Lab gruppen FAD602/FAD1202/FAD2402 Quick start guide (.pdf)
Specifications
Maximum Output Power
4 or 8 Ω per channel: 240W
Dimensions : 280 x 218 x 44mm
Weight : 2,6kg
Lab gruppen CMA1201
Brand:
Lab gruppenDescription:
- Lab gruppen CMA1201 120 Watt mixer amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation with switchable high-pass filter
- 4 mic/line inputs with individual volume controls
- Energy efficient design conserves energy and reduces
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- Direct drive, constant power technology for superior audio performance and reliability
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Front panel power control button for direct access
- Aux output for expansion to additional amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Specifications
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm (1.8 x 8.6 x 11.8")
Weight: 2.4 kg (5.3 lbs)
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82
Brand:
Lab gruppenDescription:
- Lab gruppen CM82 8 input / 2 output mixer for commercial and industrial applications
- 8 mic/line inputs with individual volume controls and output routing
- Individual front panel master volume and bass/treble controls for each output
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, 19" enclosure with brackets for rack mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€344,00
Price per piece: 344,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 437 x 248 x 44mm
Weight : 2,4kg
Lab gruppen CM41
Brand:
Lab gruppenDescription:
- Lab gruppen CM41 4 input / 1 output mixer for commercial and industrial applications
- 4 mic/line inputs with individual volume controls
- Individual front panel master volume and bass/treble controls
- Configurable priority muting function for background music override
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Front panel power control button for direct access
- Aux output for expansion to connect with amplifiers
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type mic/line input and output connectors
- Product is on order
1 piece
€272,00
Price per piece: 272,00 €
Downloads:
Quick start guide : Lab gruppen CM41/82 Quick start guide (.pdf)
Specifications
Dimensions : 299 x 218 x 44mm
Weight : 2,1kg
Lab gruppen IPX1200
Lab gruppen IPX1200
1 piece
€1 180,00
1 piece
€1 180,00
Lab gruppen IPX1200
Brand:
Lab gruppenDescription:
- Lab gruppen IPX1200 Compact 1,200 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 180,00
Monthly payment from: 34,00 €
Downloads:
Quick start guide : Lab gruppen IPX1200 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 500 W
4 Ω per channel, stereo 600 W
8 Ω per channel, stereo 300 W
Dimensions : 483 x 336 x 44 mm
Weight : 5,3 kg
Lab gruppen IPX2400
Lab gruppen IPX2400
1 piece
€1 496,00
1 piece
€1 496,00
Lab gruppen IPX2400
Brand:
Lab gruppenDescription:
- Lab gruppen IPX2400 Compact 2,400 Watt, 2-channel amplifier with DSP control for touring applications
- Low mains current draw with proven IDEEA technology for power conservation
- Highly advanced DSP with 40 real-time multi-slope Parametric EQs
- 100 user presets for system configuration and setup
- Networked control via touchscreen user interface
- AES3 and analogue inputs with redundant failover
- Renowned Speaker Protect Limiter (maxSPL) for optimal speaker match and protection
- 4-channel input mixer for multi-input mixing and switching
- Backlit display with navigation buttons and encoder for front panel setup
- Horizontal output VU meters on display in operating mode
- Binding post and Neutrik speakON* connectors
- Universal power supply supports 100 - 240 V at 50 or 60 Hz
- Fast network setup with auto-discovery and identification of amplifiers
- Product is on order
1 piece
€1 496,00
Monthly payment from: 43,00 €
Downloads:
Quick start guide : Lab gruppen IPX2400 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 800 W
4 Ω per channel, stereo 1200 W
8 Ω per channel, stereo 600 W
Dimensions : 483 x 423 x 44 mm
Weight : 7,0 kg
Lab gruppen E 12:2
Lab gruppen E 12:2
1 piece
€1 479,00
1 piece
€1 479,00
Lab gruppen E 12:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 479,00
Monthly payment from: 42,00 €
Downloads:
Spec sheet : Lab gruppen E 12:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W
Lab gruppen E 40:4
Lab gruppen E 40:4
1 piece
€2 790,00
1 piece
€2 790,00
Lab gruppen E 40:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
4 x 1,000 Watts into Hi-Z 100 V - Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 790,00
Monthly payment from: 79,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 20:4
Lab gruppen E 20:4
1 piece
€2 649,00
1 piece
€2 649,00
Lab gruppen E 20:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 649,00
Monthly payment from: 75,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 10:4
Lab gruppen E 10:4
1 piece
€2 090,00
1 piece
€2 090,00
Lab gruppen E 10:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€2 090,00
Monthly payment from: 60,00 €
Downloads:
Quick start guide : Lab gruppen E-series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg
*See spec sheet for details
Lab gruppen E 5:4
Lab gruppen E 5:4
1 piece
€1 890,00
1 piece
€1 890,00
Lab gruppen E 5:4
Brand:
Lab gruppenDescription:
- Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 890,00
Monthly payment from: 54,00 €
Downloads:
Spec sheet : Lab gruppen E 5:4 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Dimensions : 483 x 276 x 44 mm
Weight : 6,4kg
Lab gruppen E 2:2
Brand:
Lab gruppenDescription:
- Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€899,00
Monthly payment from: 26,00 €
Downloads:
Spec sheet : Lab gruppen E 2:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 8:2
Lab gruppen E 8:2
1 piece
€1 379,00
1 piece
€1 379,00
Lab gruppen E 8:2
Brand:
Lab gruppenDescription:
- Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 379,00
Monthly payment from: 40,00 €
Downloads:
Spec sheet : Lab gruppen E 8:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen E 4:2
Lab gruppen E 4:2
1 piece
€1 090,00
1 piece
€1 090,00
Lab gruppen E 4:2
Brand:
Lab gruppenDescription:
- Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Product is on order
1 piece
€1 090,00
Monthly payment from: 31,00 €
Downloads:
Spec sheet : Lab gruppen E 4:2 spec sheet (.pdf)
Quick start guide : Lab gruppen E series Quick start guide (.pdf)
Specifications
Max. Output Power (all ch.’s driven)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Dimensions : 483 x 276 x 44 mm
Weight : 4,2kg
Lab gruppen PD3000
Brand:
Lab gruppenDescription:
- Lab gruppen PD3000 Two channel amplifier delivering 2 x 1,500 Watts
- Precise power management guarantees performance and efficiency
- Proven and reliable Class-D amplifier stage
- Highly efficient Switch Mode Power Supply (SMPS)
- Speaker Protect Limiter for maximum level output and reliable driver protection
- Accurate 8-segment Signal and Limit LEDs for performance monitoring
- Integrated crossover with low-cut, high-cut and full range mode
- Comprehensive circuit protection against short circuits, DC and thermal overload
- Balanced XLR and TRS input connectors with optimised sensitivities
- Professional speakON* output connectors
- Efficient cooling with temperature-controlled fan
- Rugged and lightweight rack mount chassis for maximum durability
- Product is on order
1 piece
€609,00
Monthly payment from: 18,00 €
Downloads:
Quick start guide : Lab gruppen PD3000 Quick start guide (.pdf)
Specifications
2 Ω per channel, stereo 1000 W
4 Ω per channel, stereo 1500 W
8 Ω per channel, stereo 800 W
Dimensions : 93 x 483 x 326 mm
Weight : 6,5kg
Midas DL231
Brand:
MidasDescription:
- Midas DL231 has 2 award-winning Midas microphone preamplifiers per input with switchable +48 V phantom power
- 2 dual redundant AES50 network ports with independent phase-locked loop synchronisation
- 24 electronically balanced output channels can be sourced from microphone preamplifiers or AES50 ports
- Remote operation up to 100 m via CAT5/5e cable
- Selectable 96 kHz or 48 kHz sample rate operation
- All settings programmable from front panel controls or console
- PSU status indicator LEDs and configuration LCD display on front panel
- MIDI In, Out and Thru connectors
- Features Neutrik etherCON* AES50 network ports
- Rugged 5U rackmount chassis for durability in portable applications
- Dual redundant auto-ranging universal switch-mode power supplies
- Product is on order
1 piece
€5 899,00
Monthly payment from: 167,00 €
Downloads:
Quick start guide : Midas DL231 Quick start guide (.pdf)
Specifications
Dimensions : 5U 410mm deep
Weight : 15kg
Behringer SD251-CK
Brand:
BehringerDescription:
- Behringer SD251-CL professional studio-grade monitoring earphones
- Dynamic micro-driver provides wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
- Sound-isolating design blocks outside noise for detailed musical experience
- Secure, over-the-ear cable design ensures in-ear stability and comfort
- Optimized performance with exceptional sound quality for use with a wide range of audio devices
- 63 inch (160 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
- Zipper case included to enjoy your music on-the-go
- Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
- Product is in stock
1 piece
€39,50
Price per piece: 39,50 €
Downloads:
Quick start guide : Behringer SD251 Quick start guide (.pdf)
Specifications
Driver: 6.8 mm
Impedance: 22 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @ 1 kHz (105 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Connector: MMCX connector, detachable
Cable: 1.6 m (63")
Plug: 3.5 mm, stereo
Adapter: 6.3 mm, gold plated
Behringer SD251-CL
Brand:
BehringerDescription:
- Behringer SD251-CL professional studio-grade monitoring earphones
- Dynamic micro-driver provides wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs
- Sound-isolating design blocks outside noise for detailed musical experience
- Secure, over-the-ear cable design ensures in-ear stability and comfort
- Optimized performance with exceptional sound quality for use with a wide range of audio devices
- 63 inch (160 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
- Zipper case included to enjoy your music on-the-go
- Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
- Product is in stock
1 piece
€39,50
Price per piece: 39,50 €
Downloads:
Quick start guide : Behringer SD251 Quick start guide (.pdf)
Specifications
Driver: 6.8 mm
Impedance: 22 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @ 1 kHz (105 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Connector: MMCX connector, detachable
Cable: 1.6 m (63")
Plug: 3.5 mm, stereo
Adapter: 6.3 mm, gold plated
Behringer MO240
Brand:
BehringerDescription:
- Behringer MO240 Professional studio-grade monitoring earphones
- Single dynamic and single balanced armature micro-drivers delivering full bass and detailed highs
- Ultra-linear frequency response from 20 Hz to 20 kHz
- Sound-isolating design blocks outside noise for detailed musical experience
- Secure over-the-ear cable design ensures in-ear stability and comfort
- Optimized performance with exceptional sound quality for use with a wide range of audio devices
- 59 inch (150 cm) detachable cable with 360-degree rotating gold-plated MMCX lock-snap connector for flexibility and versatile connectivity options
- Zipper case included to enjoy your music on-the-go
- Includes foam and silicone ear-plugs in 3 sizes to ensure a perfect fit
- Product is in stock
1 piece
€41,50
Price per piece: 41,50 €
Downloads:
Quick start guide : Behringer MO240 Quick start guide (.pdf)
Specifications
Driver: Dynamic and balanced armature
Crossover frequency: 500 Hz
Impedance: 32 Ω
Frequency response: 20 Hz to 20 kHz
Sound pressure level (SPL): 93 dB @1kHz (102 dB peak)
Rated power: 3 mW
Peak power: 5 mW
Cable: Shielded, detachable
Connector:MMCX connector
Cable length: 1.5 m (59")
Plug: 3.5 mm, stereo
Adapter 6.3 mm, gold plated
Klark Teknik DS 20
Brand:
Klark TeknikDescription:
- Klark Teknik DS20 Line level splitter sends single input signal to 2 outputs
- Custom-built Midas transformer for highest signal integrity
- High headroom design offers superior sound quality
- Passive design does not require any power supply
- High quality Neutrik* XLR connectors
- Earth Lift switches for each output eliminates ground loop problems
- Fully transformer-isolated design ensures electrical separation
- Ultra-low noise and ultra-linear system for highest signal integrity
- Aluminium extrusion casing with protective rubber corners
- Compact and rugged design
- Product is in stock
1 piece
€43,00
Price per piece: 43,00 €
Downloads:
Quick start guide : Klark Teknik DS20 Quick start guide (.pdf)
Specifications
Dimension : 118 x 120 x 64 mm
Weight : 0,6kg
Dynamic range +124 dB
THD+N < 0.03 % @ 1 kHz, +4 dBu
S/N ratio > 100 dB @ +4 dBu
Behringer BC1500
Brand:
BehringerDescription:
- Behringer BC1500 High-performance set of 7 microphones tuned and matched to capture every nuance of a full drum kit
- Complete collection of premium drum microphones, ideal for studio recordings and live performances
- 1 premium large diaphragm dynamic microphone specially designed for bass drum and low frequency instruments
- 4 dynamic percussion microphones for snare, toms and other acoustic percussive instruments
- 2 matched condenser microphones for overhead stereo drum imaging with switchable low-frequency roll-off
- Cardioid polar pattern for outstanding sound source separation
- Rugged, reliable metal die-cast body construction
- Compact and versatile microphones make it suitable for precision and close mic recordings
- Gold-plated 3-pin XLR output connector for highest signal integrity
- Microphone clamps, 5/8” threaded adapters, windscreen and aluminum carry case included
- Product is on order
1 piece
€186,00
Price per piece: 186,00 €
Specifications
| Tom mic | Bass Drum mic | Cymbal mic | |
| Type | Dynamic | Dynamic | Condenser |
| Polar pattern | Uni-directional | Uni-directional | Cardioid |
| Frequency response | 50 Hz - 14 kHz | 50 Hz - 14 kHz | 50 Hz - 18 kHz |
| Sensitivity | -55 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa | -52 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/P | -42 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa |
| Power supply | N/A | N/A | 9-52 V phantom power |
| Max. SPL | 145 dB @ 1 kHz ≤1% THD | 150 dB @ 1 kHz ≤1% THD | 136 dB @ 1 kHz ≤1% THD |
| S/N ratio | 75 dB | 79 dB | 70dB |
Behringer DR18
Brand:
BehringerDescription:
- Behringer DR18 High-performance 2400-Watt powered subwoofer for live and playback applications
- Extremely powerful 18" long-excursion driver provides incredibly deep bass and acoustic power
- Extremely high sound pressure level and incredibly accurate bass
- Precise reproduction of ultra-low frequencies for ”bulletproof“ punch and impact
- State-of-the-art 2400- Watt Class-D amplifier with comprehensive over-excursion, thermal, RMS and clip limit protection
- Built-in active stereo crossover provides high-pass filtered outputs for full-range loudspeakers
- Phase switch for ultimate low-frequency performance
- Subwoofer level control to adjust the balance between subwoofer and the full-range speakers
- Power, Signal and Clip LEDs for perfect monitoring
- Intelligent limiter for maximum sound performance and woofer protection
- Pole socket for mounting with commercial spacer poles
- Ergonomically shaped handles for easy transport
- Rugged steel grill for optimal speaker protection
- Balanced XLR connections are provided for the Input and Output signals
- In stock within 7-8 weeks
1 piece
€459,00
Price per piece: 459,00 €
Downloads:
Quick start guide : Behringer DR18 Quick start guide (.pdf)
Specifications
Dimensions : 650 x 530 x 609 mm
Weight : 41,0kg
Output power 800W (2400W peak)
Max SPL: 129dB
Frequency range: 30Hz - 150Hz (±3 dB)
Behringer T-BUDS
Brand:
BeghringerDescription:
- Behringer T-Buds High-fidelity true wireless stereo earbuds provide wide frequency response (20 Hz - 20 kHz), delivering full bass and detailed highs
- Bluetooth* 5.0 true wireless technology for exceptional sound quality with up to 10 m (33 ft) of wireless freedom
- State-of-the-art, active noise cancellation with transparent mode feature enables awareness of surroundings while enjoying your music
- Splash-proof construction (IPX4) is ideal for sports, work out and any outdoor activity that requires pure listening pleasure
- Secure in-ear design ensures stability and comfort
- Seamless phone, voice commands, volume and music via touch control
- Up to 4 hours of battery life that can be extended up to 16 hours with the integrated battery charging case
- USB charging cable included
- Includes replacement silicon buds and optional bud sizes for custom fitting
- Product is in stock
1 piece
€41,90
Price per piece: 41,90 €
Downloads:
Quick start guide : Behringer T-BUDS Quick start guide (.pdf)
Behringer BO440
Brand:
BehringerDescription:
- Behringer BO440 Professional head-worn condenser microphone for a natural and accurate voice reproduction
- Ideal as main and support microphone for studio recordings, live performances, houses of worship, fitness and theaters
- Excellent choice for broadcasters, presenters, lecturers, singers, musicians, actors and performers requiring hands-free microphones
- Optimized frequency response especially for body pack transmitters
- Omni-directional polar pattern for a warm and balanced sonic quality with low proximity effect
- Rugged, reliable, low-profile and lightweight metal construction for concealed-mic performances
- Gold-plated 3-pin mini XLR output connector for highest signal integrity
- Integrated ear hooks for comfortable and nearly invisible fit
- Adjustable boom length for flexible positioning
- Integrated 4 feet (1.2 m) cable with mini XLR connector
- Discrete windscreen and cable clip included
- Product is in stock
1 piece
€45,00
Price per piece: 45,00 €
Specifications
Specifications
Capsule type: Condenser
Polar pattern: Omnidirectional
Frequency response: 20 Hz to 18 kHz
Sensitivity: -50 dB (0 dB = 1/u Pa @ 1 KHz)
Impedance: 1.2 kΩ
Max operating voltage: 9 V DC
Standard operating voltage: 3 V DC (RL: 2.2 kΩ)
Power consumption: 0.5 mA
Cable length: 1.2 m (4 ft)
Connector: Mini 3-pin XLR
Net weight: 19.5 g (0.68 oz)
Behringer BD440
Brand:
BehringerDescription:
- Behringer BD440 Professional head-worn condenser microphone for focused and transparent voice reproduction
- Ideal as main and support microphone for studio recordings, live performances, houses of worship, fitness and theaters
- Excellent choice for broadcasters, presenters, lecturers, singers, musicians, actors and performers requiring hands-free microphones
- Optimized frequency response especially for body pack transmitters
- Cardioid polar pattern for outstanding sound source separation and off-axis rejection
- Rugged, reliable, low-profile and lightweight metal construction for concealed-mic performances
- Gold-plated 3-pin mini XLR output connector for highest signal integrity
- Integrated ear hooks for comfortable and nearly invisible fit
- Adjustable boom length for flexible positioning
- Integrated 4 feet (1.2 m) cable with mini XLR connector
- Discrete windscreen and cable clip included
- Product is in stock
1 piece
€45,00
Price per piece: 45,00 €
Downloads:
Quick start guide : Behringer BD440 Quick start guide (.pdf)
Specifications
Specifications
Capsule type: Condenser
Polar pattern: Unidirectional
Frequency response: 80 Hz to 16 kHz
Sensitivity: -46 dB (0 dB = 1/u Pa @ 1 KHz)
Impedance: 1.2 kΩ
Max operating voltage: 9 V DC
Standard operating voltage: 3 V DC (RL: 2.2 kΩ)
Power consumption: 0.5 mA
Cable length: 1.2 m (4 ft)
Connector Mini: 3-pin XLR
Net weight: 20 g (0.7 oz)
WING-DANTE
Brand:
BehringerDescription:
- Behringer WING-DANTE 64-channel 48 kHz, bi-directional audio interface for Dante* IP networks
- Low-latency 24-bit signal transmission with sample-accurate synchronization
- Allows interfacing with standard 100 MBit/s or Gigabit network infrastructure with DSCP-based QoS
- Mixed sample and bit rates can coexist on the same Dante network
- WING remote control possible on the same network, using the integrated Ethernet switch
- Audinate* Dante Controller application with full control over configuration and signal routing among all Dante-enabled devices
- Dante Virtual Soundcard allows employing your PC or Mac* for IP-based multitrack recording and playback of up to 64 channels (license optionally available at (www.audinate.com)
- Secondary connection can be configured for seamless redundant audio networking
- Product is on order
1 piece
€632,00
Monthly payment from: 18,00 €
Downloads:
Quick start guide : WING-DANTE Quick start guide (.pdf)
Behringer QX2442USB
Brand:
BehringerDescription:
- Behringer X2442USB Premium ultra-low noise, high headroom mixer
- 10 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
- 8 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
- Ultra-high quality Klark Teknik FX processor with LCD display, dual-parameters, Tap function and storable user parameter settings
- "Wireless-ready" for high-quality Behringer digital wireless system (not included)
- Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect plug-ins downloadable at behringer.com
- Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound
- Channel inserts and direct outputs on each mono channel plus main mix inserts for flexible connection of outboard equipment
- 4 aux sends per channel: 2 pre/post fader switchable for monitoring/FX applications, 2 post fader (for internal FX or as external send)
- Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
- 4 subgroups with separate outputs for added routing flexibility; 4 multi-functional stereo aux returns with flexible routing
- Control room/phones outputs with multi-input source matrix; rec inputs assignable to main mix or control room/phones outputs
- Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- Rack mount brackets included for ultimate flexibility
- Product is in stock
1 piece
€381,00
Price per piece: 381,00 €
Downloads:
Quick start guide : Behringer QX2442USB Quick start guide (.pdf)
Specifications
Dimensions : 140 x 440 x 445 mm
Weight : 5,7kg
Behringer X2442USB
Brand:
BehringerDescription:
- Behringer X2442USB Premium ultra-low noise, high headroom analog mixer
- 10 state-of-the-art, phantom-powered XENYX Mic Preamps comparable to stand-alone boutique preamps
- 8 studio-grade compressors with super-easy "one-knob" functionality and control LED for professional vocal and instrumental sound
- Neo-classic "British" 3-band EQs with semi-parametric mid band for warm and musical sound
- Studio-grade FX processor with 16 editable presets including reverb, chorus, flanger, delay, pitch shifter, multi-effects, Tap function and storable user
- arameter settings
- Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio recording, editing and podcasting software plus 150 instrument/effect
- Plug-ins and ultra-low latency driver downloadable at www.behringer.com
- Channel inserts and direct outputs on each mono channel plus main mix inserts for flexible connection of outboard equipment
- 4 aux sends per channel: 2 pre/post fader switchable for monitoring/FX applications, 2 post fader (for internal FX or as external send)
- Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
- 4 subgroups with separate outputs for added routing flexibility; 4 multi-functional stereo aux returns with flexible routing
- Balanced main mix outputs with ?" jack and gold-plated XLR connectors, separate control room, headphones and stereo rec outputs
- Control room/phones outputs with multi-input source matrix; rec inputs assignable to main mix or control room/phones outputs
- Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
- "Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
- Rack mount brackets included for ultimate flexibility
- Product is on order
1 piece
€360,00
Price per piece: 360,00 €
Downloads:
Quick start guide : Behringer X2442USB Quick start guide (.pdf)
Specifications
Dimensions : 135 x 440 x 420 mm
Weight : 6,35kg