30 toodet

Lake LMX48

Lake LMX48

Bränd:

Lake

Kirjeldus:

  • Lake LMX48 helisüsteemi protsessor
  • Up to 38 audio input channels and 44 output channels directly routable. 16 input routers with 4 failover levels each can be matrix mixed into 8 LAKE MESA or 4 LAKE CONTOUR channels with up to 12 processed outputs.
  • Console switching/mixing with Input Scenes. Recall Scene through front panel, Lake Controller or a custom-made switching device through the internal GPI port
  • High-performance Lake digital audio system processor for unparalleled loudspeaker management and system control
  • Full system control via Lake Controller touch-screenoptimized software application
  • Raised Cosine Equalization plus linear phase, classic, FIR crossover and Lake XP capability including dedicated FIR for array optimization and multiband/limiter compressor for ultimate sound-shaping abilities
  • Configurable Lake groups offers simultaneous non-destructive parameter adjustments across all Lake platforms
  • 4 x Neutrik XLR providing 4 analog inputs with Iso-Float ground isolation OR 2 x AES3 inputs with up to 192 kHz sampling frequency with individual sample rate converter per AES3 input in addition to 2 extra analog inputs
  • 8 x Neutrik XLR providing 8 analog outputs with Iso-Float ground isolation OR 4 x AES3 outputs with up to 192 kHz sampling frequency in addition to 4 extra analog outputs.
  • 5 x RJ45 ports provide 8 x 8 channels of dual redundant Dante/AES67 interfaces and remote configuration via Lake Controller and Dante Controller software. One of the ports has PoE+
  • 2 x RJ45 ports provide 2 x AES50 individual interfaces
  • 1 x RJ45 port providing GPI
  • 2 x BNC providing Word clock I/O with 75 Ohm selectable termination
  • High-quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
  • 8 different clock sources
  • High contrast full color IPS display with 6 dynamic buttons and rotary encoder for navigation
  • Dedicated buttons for Menu, Exit and Scene selection activation
  • Front panel accessible dedicated module input and output mute buttons and LED metering
  • Rugged 1U rackmount chassis for touring applications
  • 100 user Frame presets for simple and efficient system configuration and setup
  • Redundant universal 85- 264 V power supply served through locking IEC connectors
  • Toode on tellitav

1 tükk

€3 990,00

Kuumakse alates: 113,00 €

Lae alla:

Tooteinfo : ProductName tooteinfo (.pdf)
Lühijuhend : ProductName lühijuhend (.pdf)

Tehnilised andmed

Kasutajaliides:

    Display: Daylight readable full color IPS (320 x 210)
    Menu: Fault/Warning detailed description on display
    Interface: Intuitive interface with ability to recall Scene- and Frame Preset, Frame Config, see IP address, Main status
    Meters and Mute buttons: 16x LED meters and clip indicators, with individual mute of inputs or outputs with dedicated buttons

Lake funktsionaalsus

    Module configuration: 8x MESA, 4x Contour or 2x Contour/4x MESA modules
    Processing channels: 12x in Contour, 8x in MESA, 10x in Contour/MESA
    Block program: Mesa, XP, Linear phase, Classic crossovers and Auxiliary
    Input routers: 16 input routers with 4 priorities in each, seamless fallback to lower priorities
    Module input mixer: 16 ch. for Contour, 16 ch. for MESA-modules. Mix any ratio between all input routers.
    Link ability: Yes, via 24 channels of AES50
    Input Processing: Parametric EQ with MESA and Ideal Graphic equalizers, both utilizing Raised Cosine algorithms
    Output Processing: Crossovers with up to 48dB/oct. Parametric EQ, shelving and all pass filters, FIR
    Features: Delay, Mute, Phase, Gain etc.
    Limiters: LimiterMax with Peak and RMS limiter
    SuperModule compatible: No

Audio Performance

    Conversion Resolution: 24-bit
    Internal Sample Rate: 96 kHz
    Internal Floating Path: 32-bit floating point
    Product Propagation Delay:
        Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via DSP) 0.872 ms
        Analog (Analog in to Analog out via DSP) 1.036 ms
        Pass through (Analog in to AES synchronous 96 kHz bypassing DSP) 0.143 ms
    Maximum Available User Delay: 2 seconds from any input to any output

Analoog

    Inputs: 8x inputs with Iso-Float™ ground isolation configurable per blocks of 4
    Outputs: 8x outputs
    Frequency Response, analog-to-digital: +/-0.05 dB, 20 Hz to 20 kHz
    Frequency Response, digital-to-analog: +/-0.2 dB, 20 Hz to 20 kHz
    THD+Noise, Inputs: 0.0015% typical at 1 kHz
    THD+Noise, Outputs: 0.0008% typical at 1 kHz
    Dynamic Range, Inputs: 126 dB
    Dynamic Range, Outputs: 116 dB
    Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
    Output Impedance: 50 Ohm
    Maximum Input level: +21 dBu
    Input Sensitivity Settings for Digital Full-Scale: +21 dBu
    Maximum Output level: +21 dBu
    Crosstalk, inputs: -108 dB, 20 Hz to 20 kHz
    Crosstalk, outputs: -98 dB, 20 Hz to 20 kHz
    Common Mode Rejection Ratio (CMRR): >70 dB, 20 Hz to 20 kHz

AES/EBU Sample Rate konvertimine

    Inputs and Outputs: 8x inputs, 8x outputs
    ASRC: Yes, high quality low latency available per digital input
    Supporting Sample Rates: 44.1 kHz, 48 kHz, 88.1 kHz, 96 kHz, 176.4 kHz, 192 kHz (I/O individually selected)
    Supported Resolutions: Up to 24-bit
    THD+Noise (limits): -135 dB at 96 kHz and -125 dB at 44.1 kHz sample rate
    THD+Noise (typical): -145 dB at 96 kHz and -138 dB at 44.1 kHz sample rate
    Dynamic Range: Base48 -144 dBFS, Base44 -142 dBFS

Behringer MX882 V2

Behringer MX882 V2

Bränd:

Behringer

Kirjeldus:

  • Behringer MX882 V2 väikese müratasemega signaali mixer/jagaja
  • 8 sisse/ 2välja mixer või 2 sisse / 8 välja signaalijagaja
  • Iga kanal on võimeline töötama mixeri või jagaja režiimis
  • Kasutatav 6 sisse / 6 välja signaalinivoo ühtlustamise võimendina
  • Muundab helisignaalid -10 dBV ja +4 dBu vahel
  • Lai sagedusala tagab kadudeta signaaliedastuse
  • 6 mono sisse, 6 mono välja, 2 main sisendit ja 2 main väljundit
  • 8-segmendiline sisend/väljund nivooindikaator igal kanalil
  • Universaalne toiteplokk ~100 - 240 V
  • Toode on tellitav

1 tükk

€120,00

Hind tk kohta: 120,00 €

Lae alla:


Lühijuhend : Behringer MX882 V2 lühijuhend (.pdf)

Tehnilised andmed

Helisisendid
Ühendused: XLR and 1/4" TRS
Tüüp: RF-filtered, servo-balanced input
Impedants: 40 kΩ balanced, 20 kΩ unbalanced
Nominaalne sisendnivoo: -10 dBV to +4 dBu
Max. sisendsignaali tugevus: +21 dBu, balanced and unbalanced
CMRR: Typically >55 dB @ 1 kHz
Heliväljundid
Ühendused: XLR and 1/4" TRS
Tüüp: Electronically servo-balanced output stage
Impedants: 100 Ω balanced & unbalanced
Max. väljund nivoo: +21 dBu, balanced and unbalanced
Süsteemi spetsifikatsioonid
Sagedusala: 10 Hz to 130 kHz, +/- 3 dB
Signaali ja müra suhe (S/N ratio): >95 dBu, unweighted, 22 Hz to 22 kHz
THD: 0.003% typical @ +4 dBu, unity gain
Funktsioonid
Põhi sisendnivoo (Main input level): Muudetav
Põhi väljundnivoo (Main output level): Muudetav
Nivoo: Muudetav igal kanalil
Balanss/panoraam: Stereo field placement
Funktsioonivalitsad
Main link: Links the main input signal to the main output
Split/mix: Changeover from split to mix mode for each channel
Näidikud
Sisendnivoo (main): 4-segmendiga LED: -24/-12/0/+6 dB
Väljundnivoo (main): 4-segmendiga LED: -24/-12/0/+6 dB
Sisend/väljund nivoo: 8-segmendiga LED: -24/-18/-12/-6/0/+6/+12/+18 dB
Toide
Impulsstoiteplokk, universaalne: 100-240 V ~50/60 Hz
Võimsustarve: 15 W
Toitekaabli ühendus: Standard IEC pistik
Mõõtmed
Mõõdud: H x W x D 44 x 483 x 149 mm
Kaal: 1.7 kg

Behringer MS8000

Behringer MS8000

Bränd:

Behringer

Kirjeldus:

  • Behringer MS8000 mikrofoni signaalijagaja
  • Väikse müratasemege 8 sisse 16 välja mikrofonisignaali jagaja
  • Igal kanalil direct out ja Link väljund
  • Igal kanalil varjestuse lahtisidestamise valits
  • Mugav sisendite link'imise võimalus
  • Phantoomi suunamine Direct out väljundisse
  • Toode on tellitav

1 tükk

€99,00

Hind tk kohta: 99,00 €

Lae alla:

Lühijuhend : Behringer MS8000 lühijuhend (.pdf)

Tehnilised andmed


Mõõdud : 44 x 483 x 65 mm
Kaal : 1,1 kg

EAW UXA4401

EAW UXA4401

Bränd:

EAW

Kirjeldus:

  • EAW UXA4401 4-kanaliga installatsioonivõimendi
  • 280W 4/8Ohm
  • 4x sisend
  • 4x väljund
  • Ühildub lihtsalt EAW installatsioonikõlaritega
  • Wifi või kaabliga ühendamise võimalus
  • Konfigureeritav GPIO abil
  • Erp ja EnergySTAR vastav
  • Toode on tellitav

1 tükk

€1 490,00

Kuumakse alates: 43,00 €

Lae alla:

Spetsifikatsioonid: EAW UXA4401 specification sheet (.pdf)

Tehnilised andmed

EAW UXA4401

Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit

EAW MKC 50

EAW MKC 50

Bränd:

EAW

Kirjeldus:

  • EAW MKC50 5,25"+1" installatsioonikõlar
  • Kompaktne, mitmekülgsete võimalustega seinakõlar
  • 80Hz-20kHz
  • 121dB
  • 150W@8Ohm
  • 3,3kg
  • Ilmastikule vastupidav korpus
  • Saadaval ka valgena
  • Toode on Eesti laos ja koheselt saadaval

 

 

1 tükk

€339,00

Hind tk kohta: 339,00 €

Lae alla:

Spetsifikatsioonid: EAW MKC50 specification sheet (.pdf)

Tehnilised andmed


Mudel: MKC50
Sagedusala​: 80Hz-20kHz
Max SPL: 121dB
Töörežiim: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:

LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominaalne katvusnurk: 110° kooniline
Võimsus: 150W @ 8ohms
Pistikud ühendused: 1x Neutrik NL4, 2-pooluseline kruviklemm
Mõõdud: 235 x 165 x 141mm
Kaal: 3.3kg

EAW MKC 60

EAW MKC 60

Bränd:

EAW

Kirjeldus:

  • EAW MKC50 6,55"+1" installatsioonikõlar
  • Kompaktne, mitmekülgsete võimalustega seinakõlar
  • 80Hz-20kHz
  • 121dB
  • 250W@8Ohm
  • Ilmastikule vastupidav korpus
  • 4,9kg
  • Saadaval ka valgena
  • Toode on tellitav

 

 

1 tükk

€595,00

Kuumakse alates: 17,00 €

Lae alla:

Spetsifikatsioonid: EAW MKC60 specification sheet (.pdf)

Tehnilised andmed


Mudel: MKC60
Sagedusala​: 70Hz-20kHz
Max SPL: 125dB
Töörežiim: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:

LF – 6,5″ Cone, 1.5″ võnkepool, Vented
HF – 1″ dome tweeter, coaxial
Nominaalne katvusnurk: 110° kooniline
Võimsus: 250W @ 8ohms
Pistikud ühendused: 1x Neutrik NL4, 2-pooluseline kruviklemm
Mõõdud: 324 x 208 x 206mm
Kaal: 4,9kg

EAW MKC 80

EAW MKC 80

Bränd:

EAW

Kirjeldus:

  • EAW MKC80 8"+1" installatsioonikõlar
  • Võimekas, kompaktse disainiga kõlar
  • Parendeeritud CSA koaksiaalne ruupor
  • Integreeritud käepide ja statiivi ava
  • 60Hz-20kHz
  • 132dB
  • 450W@8Ohm
  • Saadaval ilmastikukindlana ja trafoga
  • Sobib kasutamiseks EAW UXA4403 võimendiga
  • 10kg
  • Toode on tellitav

 

 

1 tükk

€890,00

Kuumakse alates: 26,00 €

Tehnilised andmed

Mudel: MKC80
Sagedusala: 60Hz-20kHz
Max SPL: 132dB
Töörežiim: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:

LF Transducer – 1x8in cone, 2-tolline võnkepool, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominaalne katvusnurk: 90° x 60°, pööratav ruupor
Võimsus: 450W @ 8ohms
Pistikühendused: 2x Neutrik NL4, 2-pooluseline riviklemm
Mõõdud: 422 x 255 x 267mm
Kaal: 10kg

Hoiutingimused

Spetsifikatsioonid: EAW MKC80 specification sheet (.pdf)

Behringer RX1602 V2

Behringer RX1602 V2

Bränd:

Behringer

Kirjeldus:

  • Behringer RX1602 V2 paindlik ja mitmekülgne helimikser
  • 16x balanseeritud liinisisendit mono või stereosignaalidele
  • Iga kanali kohta eraldi balansi ja +4/-10 dB nivoo valitsad
  • Taustvalgusega kahe funktsiooniga Mute valits igal sektsioonil koos Clip indikaatoriga
  • Monitor/FX signaalid suunatavad kõrvaklapi väljundisse
  • Kaks täpset 7-segmendilist LED nivooindikaatorit ja eraldi parema vasaku kanali nivoo reduleerimise võimalus
  • 6,35mm pulk väljundid ning lihtsasti ligipääsetav kõrvaklapiväljund esipaneelil koos nivooregulaatoriga
  • Kvaliteetsed pöördvalitsad
  • Sisemine toiteplokk
  • Toode on tellitav

1 tükk

€138,00

Hind tk kohta: 138,00 €

Lae alla:


Lühijuhend : Behringer RX1602 V2 lühijuhend (.pdf)

Tehnilised andmed

Mõõdud : 44 x 483 x 149 mm

Kaal : 1,8kg

Klark Teknik DM TCE-EU

Klark Teknik DM TCE-EU

Bränd:

Klark Teknik

Kirjeldus:

  • Klark Teknik DM TCE-EU 2,3-tolline värvilise ekraaniga puutetundlik kontroller
  • Programmeertiavad valitsad
  • POE toitega
  • Toetab DM seeria seadmete mitut lehekülge ning funktsiooni
  • Üksiku EU paigaldutoosi suuruses
  • Komplektis must ja valget värvi raam ning valitsa nupud
  • Programmeeritav DM KONTROL tarkvara abil
  • Toode on tellitav

1 tükk

€245,00

Hind tk kohta: 245,00 €

Tehnilised andmed


Mõõdud : 86,36 x 86,36 x 53,75mm
Kaal : 0,16kg

Klark Teknik CP8000EU

Klark Teknik CP8000EU

Bränd:

Klark Teknik

Kirjeldus:

  • Klark Teknik CP8000EU süvistatav seinakontroller DM8000 seeriale
  • Nivoo valitsat on võimalik määrata sisendsignaalile või üldnivoo reguleerimiseks
  • Valits võimaldab aktiveerida lisa sisendeid 1-6
  • Kõik valitsad taustvalgusega
  • Toide üle võrgu DM8000 protsessorist
  • Maksimaalne Cat5/6 või 5-juhiga kaabli pikkus 100m
  • Kompaktne disain võimaldab paigaldamist enamikesse standard paigaldustoosidesse/karbikutesse
  • Piisavalt ruumi markeerimiseks
  • Diskreetne välimus sobitub iga sisekujundusega
  • Toode on tellitav

1 tükk

€56,00

Hind tk kohta: 56,00 €

Tehnilised andmed


Mõõdud : 80 x 80 x 36mm
Kaal : 0,07kg

Midas Heritage-D HD96-24 IP

Midas Heritage-D HD96-24 IP

Bränd:

Midas

Kirjeldus:

  • Midas Heritage-D HD96-IP 144-kanaliga digitaalne helipult 96kHz
  • 120 samal ajateljel ja faasi-koherentset mix bus'i
  • 21-tolline värviline TFT mahtuvuslik puuteekraan
  • Multitouch kasutajaliides
  • Auhinnatud Midas mikrofonieelvõimenid
  • HyperMAC ja AES50 võrguühendused võimaldavad valida 576 sisendi ja 576 väljundi seast 96kHz saple rate juures
  • Kaks digitaalse võrguprotokolli konverterit võimaldavad mõlemas suunas kuni 128 kanalit asünkroonse sample rate konversiooniga
  • 24x VCA gruppi ja piiramatu arv POP gruppe
  • Kuni 24 mitmekanaliga efektiprotsessorit (efect engine)
  • Integreeritud Wifi moodul
  • 32x lisaväljundi topelt ULTRANET mooduli abil
  • 28x Midas PRO motoriseeritud heeblit
  • Puutetundlikud valitsad
  • 2x universaalset toiteplokki
  • Sobivad stageboxid: DL251, DL231, DL153, DL151, DL152, DL154, DL155
  • Installatsiooni versioon (ilma transpordikastita)
  • Toode on tellitav

Midas HD-96-TP frontMidas HD-96-TP leftMidas HD-96-TP rightMidas Heritage-D HD-96-TP rear

1 tükk

€29 500,00

Kuumakse alates: 835,00 €

Lae alla:


Lühijuhend :  Midas Heritage-D HD-96 lühijuhend (.pdf)

Tehnilised andmed


Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Mõõdud : 1028 x 719 x 352 mm
Kaal : 43,2kg

Klark Teknik DF1000

Klark Teknik DF1000

Bränd:

Klark Teknik

Kirjeldus:

  • Klark Teknik DF1000 2-kanaliga eelseadistud automaatne feedback elimineerija
  • Lisab kuni 10dB süsteemi gain'i
  • Tuvastab ja eemaldab koheselt akustilise tagasiside ("vile")
  • Ülikiire ja täpne DSP valib ning lisab kuni 32 filtrit kanali kohta
  • Töötab efektiivselt nii kõnele kui muusikale
  • Kaks autonoomset kanalit stereo või kahe eraldi mono tsoonide protsessimiseks
  • Väga kitsad filtrid (kuni 1/30 oktavi) aitavad säilitad signaali algset kõla
  • Tagasiside eemaldamise ning filtrite lähtestamise valitsad esipaneelil
  • Kaks balansseeritud/balansseerimata kombo pistikuga (XLR ja TRS) ning Euroblock tüüpi kruviklemmidega sisendit ja väljundit
  • Universaalne toiteplokk
  • Toode on tellitav

1 tükk

€205,00

Hind tk kohta: 205,00 €

Lae alla:


Lühijuhend : Klark Teknik DF1000 lühijuhend (.pdf)

Tehnilised andmed


Mõõdud : 483 x 296 x 50 mm
Kaal : 2,9kg

Klark Teknik DM8500

Klark Teknik DM8500

Bränd:

Klark Teknik

Kirjeldus:

  • Klark Teknik DM8500 avatud arhitektuuriga digitaalne heliprotsessor
  • 64 x 64 topelt avariikindlusega Dante/AES67 digitaalne audioliides
  • 10x mikrofoni eelvõimendit/liini sisendit
  • 6 elektrooniliselt balansseeritud liini väljundit
  • 24x vabalt suunatavat Acoustic Echo Cancellation efekti
  • 16x ULTRANET väljundit
  • USB liides
  • Ethernet liides
  • Integreeritud veebiserver konfigureerimiseks
  • Integreeritud meediakeskus heli salvestamiseks ja mahamängimiseks
  • Labgruppen D-seeria ja Lucia võimendite tugi
  • RS232 liides kolmandate osapoolte juhtsüsteemide jaoks
  • 6 kasutaja-seadistatavat GPIO sisend/väljundühendust
  • Universaalne toiteplokk
  • Toode on tellitav

1 tükk

€2 574,00

Kuumakse alates: 73,00 €

Lae alla:


Lühijuhend : Klark Teknik DM8500 lühijuhend (.pdf)

Tehnilised andmed


Mõõdud : 483 x 293 x 44mm
Kaal : 3,6 kg

Lab gruppen FAD602

Lab gruppen FAD602

Bränd:

Lab gruppen

Kirjeldus:

  • Labgruppen FAD602 2x60W installatsioonivõimendi
  • Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
  • Dante digitaalse audioprotokolli liides
  • Energy Star energiasäästu sertifikaat
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Muutmiskindlad nivooregulaatorid tagaküljes
  • 1U 19" seadmeräkki paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
  • Toode on tellitav

1 tükk

€529,00

Kuumakse alates: 15,00 €

Tehnilised andmed


Maximum Output Power
4 or 8 Ω per channel: 60W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg

Lab gruppen FAD1202

Lab gruppen FAD1202

Bränd:

Lab gruppen

Kirjeldus:

  • Labgruppen FAD1202 2x120W installatsioonivõimendi
  • Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
  • Dante digitaalse audioprotokolli liides
  • Energy Star energiasäästu sertifikaat
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Muutmiskindlad nivooregulaatorid tagaküljes
  • 1U 19" seadmeräkki paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
  • Toode on tellitav

1 tükk

€579,00

Kuumakse alates: 17,00 €

Tehnilised andmed


Maximum Output Power
4 or 8 Ω per channel: 120W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg

Lab gruppen FAD2402

Lab gruppen FAD2402

Bränd:

Lab gruppen

Kirjeldus:

  • Labgruppen FAD2402 2x240W installatsioonivõimendi
  • Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
  • Dante digitaalse audioprotokolli liides
  • Energy Star energiasäästu sertifikaat
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Muutmiskindlad nivooregulaatorid tagaküljes
  • 1U 19" seadmeräkki paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
  • Toode on tellitav

1 tükk

€669,00

Kuumakse alates: 19,00 €

Tehnilised andmed


Maximum Output Power
4 or 8 Ω per channel: 240W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg

Lab gruppen CMA1201

Lab gruppen CMA1201

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen CMA1201 120W installatsiooni mikservõimendi
  • Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
  • 4 mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
  • Energiasäästlik disain
  • Üldnivoo reguleerimise võimalus koos 2-ribalise ekvaliaiseriga esipaneelil
  • Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Toitelüliti esipaneelil
  • Lisa heliväljund teiste võimenditega ühendamiseks
  • 1U 19" seadmeräkki paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
  • Toode on tellitav

1 tükk

€344,00

Hind tk kohta: 344,00 €

Tehnilised andmed

Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm
Weight: 2.4 kg
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B

 

Lab gruppen CM82

Lab gruppen CM82

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen CM82 8sisse /2 välja installatsioonimikser
  • 8x mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
  • Üldnivoo regulaator esipaneelil 2-ribalise ekvalaiseriga
  • Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Toitelüliti esipaneelil
  • Lisa heliväljund võimenditega ühendamiseks
  • 1U 19" seadmeräkki paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Toode on tellitav

 

1 tükk

€344,00

Hind tk kohta: 344,00 €

Lae alla:


Lühijuhend : Labgruppen CM41/82 lühijuhend (.pdf)

Tehnilised andmed

Mõõdud : 437 x 248 x 44mm
Kaal : 2,4kg

Lab gruppen CM41

Lab gruppen CM41

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen CM41 4sisse /1 välja installatsioonimikser
  • 4x mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
  • Üldnivoo regulaator esipaneelil 2-ribalise ekvalaiseriga
  • Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
  • Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
  • Toitelüliti esipaneelil
  • Lisa heliväljund võimenditega ühendamiseks
  • 1U 19" seadmeräkki, lauale või seinale paigaldatav
  • Euroblock tüüpi sisend- ja väljundpistikud
  • Toode on tellitav

1 tükk

€272,00

Hind tk kohta: 272,00 €

Lae alla:


Lühijuhend : Labgruppen CM41/82 lühijuhend (.pdf)

Tehnilised andmed


Dimensions : 299 x 218 x 44mm
Weight : 2,1kg

Lab gruppen E 12:2

Lab gruppen E 12:2

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€1 479,00

Kuumakse alates: 42,00 €

Tehnilised andmed

Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W

Lab gruppen E 40:4

Lab gruppen E 40:4

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
    4  x 1,000 Watts into Hi-Z 100 V
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€2 790,00

Kuumakse alates: 79,00 €

Lae alla:


Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)

Tehnilised andmed

Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*See spec sheet for details

Lab gruppen E 20:4

Lab gruppen E 20:4

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€2 649,00

Kuumakse alates: 75,00 €

Lae alla:


Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)

Tehnilised andmed

Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg

*Vaata spetsifikatsioonilehte

Lab gruppen E 10:4

Lab gruppen E 10:4

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€2 090,00

Kuumakse alates: 60,00 €

Lae alla:


Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)

Tehnilised andmed


Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg

*Vaata spetsifikatsioonilehte

Lab gruppen E 5:4

Lab gruppen E 5:4

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fans with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€1 890,00

Kuumakse alates: 54,00 €

Tehnilised andmed


Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 6,4kg

Lab gruppen E 2:2

Lab gruppen E 2:2

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€899,00

Kuumakse alates: 26,00 €

Tehnilised andmed


Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg

Lab gruppen E 8:2

Lab gruppen E 8:2

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€1 379,00

Kuumakse alates: 40,00 €

Tehnilised andmed


Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg

Lab gruppen E 4:2

Lab gruppen E 4:2

Bränd:

Lab gruppen

Kirjeldus:

  • Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
  • Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
  • High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
  • IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
  • Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
  • Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
  • Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
  • Built in 50 Hz high pass filter selectable per channel available on rear panel switch
  • Per-channel attenuation knob and signal LED on rear panel for simple commissioning
  • Efficient cooling with temperature-controlled fan with front to back airflow
  • Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
  • GPIO connector with power control and indication for further system integration
  • Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
  • Toode on tellitav

 

1 tükk

€1 090,00

Kuumakse alates: 31,00 €

Tehnilised andmed


Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg

Behringer RX1202FX

Behringer RX1202FX

Bränd:

Behringer

Kirjeldus:

  • Behringer RX1202FX analoog 3U rack mixer
  • 8x tippklassi XENYX mikrofoni eelvõimendit
  • "British" 2-ribaline sooja kõlaga ekvalaiser
  • Efektiprotsessor koos 100 suurepärase eelseadisusega
  • Lülitatav +48V phantom toide kondensaatormikrofonidele
  • 4x balanseeritud liinisisendit
  • CD/Tape sisend võimalik suunata otse põhi- või lisaväljundisse/kõrvaklappidesse
  • 2 Aux liini iga kanali kohta (1 pre fader monitoridele, 1 post fader efektidele)
  • Eraldi Control Room, kõrvaklapi ja DC/Tape väljundid
  • Balanseeritud Main väljund kullatud XLR pistikutega
  • Vastupidavad 60-mm käiguga heeblid ja tihendiga pöördvalitsad
  • Universaalne toiteplokk 100-240V
  • Toode on tellitav

1 tükk

€210,00

Hind tk kohta: 210,00 €

Tehnilised andmed

Mõõdud : 482 x 133 x 150 mm

Kaal : 3,04kg

Behringer CE500D

Behringer CE500D

Bränd:

Behringer

Kirjeldus:

  • Behringer CE500D multifunktsionaalne 100W aktiivkõlar
  • Sobib restoranidesse, kauplustesse, näitustele, multimeedia ja koduaudio lahendustesse
  • Suurepärane helikvaliteet, suure dünaamikaga lineaarse sageduskarakteristikuga
  • Revolutsiooniline Class-D võimenditehnoloogia: suur võimsus ja uskumatu helikvaliteet
  • Suure võimsusega 5,5-tolline madalsagedusvaljuhääldi ja ½" tweeter
  • Madala müratasemega mic/line sisend koos nivoo reguleerimise võimaluse ning ülekoormus LED'iga
  • Lisa liiniväljund võimaldab signaali edastada järgmistesse kõlaritesse
  • Integreeritud kõlari kaitsefunktsiooniga limiter
  • Paindlik ja vastupidav seinakinnitus
  • Universaalne toiteplokk 100-240V
  • Toode on tellitav

1 tükk

€149,00

Hind tk kohta: 149,00 €

Tehnilised andmed

Mõõdud : 320 x 196 x 195mm

Kaal : 4,0kg

K&M 24110

K&M 24110

Bränd:

K&M

Kirjeldus:

  • K&M 24110 muudetava positsiooniga kõlarikinnitus
  • Asend: muudetav, 11 positsiooni
  • Maksimaalne koormus: 50kg
  • Kinnitusviis: seinakinnitus
  • Värv: must
  • Kõlari kinnituspunkti kaugus seinast: 420mm
  • Kaal: 2,63kg
  • Toode on tellitav

1 tükk

€74,00

Hind tk kohta: 74,00 €

Tehnilised andmed

Asend: muudetav, 11 positsiooni
Vertikaalne nurk: 0° to 22°
Materjal: teras
Maksimaalne koormus: 50kg
Kinnitusviis: seinakinnitus
Värv: must
Kõlari kinnituspunkti kaugus seinast: 420mm
Kaal: 2,63kg

0