Behringer MX882 V2
Bränd:
BehringerKirjeldus:
- Behringer MX882 V2 väikese müratasemega signaali mixer/jagaja
- 8 sisse/ 2välja mixer või 2 sisse / 8 välja signaalijagaja
- Iga kanal on võimeline töötama mixeri või jagaja režiimis
- Kasutatav 6 sisse / 6 välja signaalinivoo ühtlustamise võimendina
- Muundab helisignaalid -10 dBV ja +4 dBu vahel
- Lai sagedusala tagab kadudeta signaaliedastuse
- 6 mono sisse, 6 mono välja, 2 main sisendit ja 2 main väljundit
- 8-segmendiline sisend/väljund nivooindikaator igal kanalil
- Universaalne toiteplokk ~100 - 240 V
- Toode on tellitav
1 tükk
€120,00
Hind tk kohta: 120,00 €
Lae alla:
Lühijuhend : Behringer MX882 V2 lühijuhend (.pdf)
Tehnilised andmed
Helisisendid
Ühendused: XLR and 1/4" TRS
Tüüp: RF-filtered, servo-balanced input
Impedants: 40 kΩ balanced, 20 kΩ unbalanced
Nominaalne sisendnivoo: -10 dBV to +4 dBu
Max. sisendsignaali tugevus: +21 dBu, balanced and unbalanced
CMRR: Typically >55 dB @ 1 kHz
Heliväljundid
Ühendused: XLR and 1/4" TRS
Tüüp: Electronically servo-balanced output stage
Impedants: 100 Ω balanced & unbalanced
Max. väljund nivoo: +21 dBu, balanced and unbalanced
Süsteemi spetsifikatsioonid
Sagedusala: 10 Hz to 130 kHz, +/- 3 dB
Signaali ja müra suhe (S/N ratio): >95 dBu, unweighted, 22 Hz to 22 kHz
THD: 0.003% typical @ +4 dBu, unity gain
Funktsioonid
Põhi sisendnivoo (Main input level): Muudetav
Põhi väljundnivoo (Main output level): Muudetav
Nivoo: Muudetav igal kanalil
Balanss/panoraam: Stereo field placement
Funktsioonivalitsad
Main link: Links the main input signal to the main output
Split/mix: Changeover from split to mix mode for each channel
Näidikud
Sisendnivoo (main): 4-segmendiga LED: -24/-12/0/+6 dB
Väljundnivoo (main): 4-segmendiga LED: -24/-12/0/+6 dB
Sisend/väljund nivoo: 8-segmendiga LED: -24/-18/-12/-6/0/+6/+12/+18 dB
Toide
Impulsstoiteplokk, universaalne: 100-240 V ~50/60 Hz
Võimsustarve: 15 W
Toitekaabli ühendus: Standard IEC pistik
Mõõtmed
Mõõdud: H x W x D 44 x 483 x 149 mm
Kaal: 1.7 kg
Behringer MS8000
Bränd:
BehringerKirjeldus:
- Behringer MS8000 mikrofoni signaalijagaja
- Väikse müratasemege 8 sisse 16 välja mikrofonisignaali jagaja
- Igal kanalil direct out ja Link väljund
- Igal kanalil varjestuse lahtisidestamise valits
- Mugav sisendite link'imise võimalus
- Phantoomi suunamine Direct out väljundisse
- Toode on tellitav
1 tükk
€99,00
Hind tk kohta: 99,00 €
Lae alla:
Lühijuhend : Behringer MS8000 lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 44 x 483 x 65 mm
Kaal : 1,1 kg
EAW UXA4401
Bränd:
EAWKirjeldus:
- EAW UXA4401 4-kanaliga installatsioonivõimendi
- 280W 4/8Ohm
- 4x sisend
- 4x väljund
- Ühildub lihtsalt EAW installatsioonikõlaritega
- Wifi või kaabliga ühendamise võimalus
- Konfigureeritav GPIO abil
- Erp ja EnergySTAR vastav
- Toode on tellitav
1 tükk
€1 490,00
Kuumakse alates: 43,00 €
Lae alla:
Spetsifikatsioonid: EAW UXA4401 specification sheet (.pdf)
Tehnilised andmed
EAW UXA4401
Channels 4
Output Power Single: channel driven 280W* @ 4/8 ohms
Total System Power: 560W*
Power Consumption: 150W
Dimensions: 44.5 x 220 x 296 mm
Weight: 2.8kg
Output Circuitry: UMAC™ Class D - full bandwidth PWM modulator with ultra-low distortion
Output Voltage: 70Vp / 140Vpp (unloaded) // Bridged 140Vp / 280 Vpp (unloaded)
Signal To Noise-Ratio: >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
THD+N (typical) < 0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
Frequency Response: 20Hz-20kHz (+0/-0.25dB (8Ω load, 3dB below rated power)
Protection Circuits: Short circuit, DC, Undervoltage, Temperature and Overload protection
Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Operating temperature: 0-40C
Operating Voltage/Frequency: Universal Mains, 100V-240V, 50Hz-60Hz
Standby Consumption <0.5W
Accessories Rack mount kit, Wall/desktop mount kit
Power Ratings 1% THD @ 120Vac and 230Vac
*System limited by SMPS RMS Power Limit
EAW MKC 50
Bränd:
EAWKirjeldus:
- EAW MKC50 5,25"+1" installatsioonikõlar
- Kompaktne, mitmekülgsete võimalustega seinakõlar
- 80Hz-20kHz
- 121dB
- 150W@8Ohm
- 3,3kg
- Ilmastikule vastupidav korpus
- Saadaval ka valgena
- Toode on Eesti laos ja koheselt saadaval
1 tükk
€339,00
Hind tk kohta: 339,00 €
Lae alla:
Spetsifikatsioonid: EAW MKC50 specification sheet (.pdf)
Tehnilised andmed
Mudel: MKC50
Sagedusala: 80Hz-20kHz
Max SPL: 121dB
Töörežiim: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 5.25″ Cone, 1.25″ VC Vented
HF – 1″ dome tweeter, coaxial
Nominaalne katvusnurk: 110° kooniline
Võimsus: 150W @ 8ohms
Pistikud ühendused: 1x Neutrik NL4, 2-pooluseline kruviklemm
Mõõdud: 235 x 165 x 141mm
Kaal: 3.3kg
EAW MKC 60
Bränd:
EAWKirjeldus:
- EAW MKC50 6,55"+1" installatsioonikõlar
- Kompaktne, mitmekülgsete võimalustega seinakõlar
- 80Hz-20kHz
- 121dB
- 250W@8Ohm
- Ilmastikule vastupidav korpus
- 4,9kg
- Saadaval ka valgena
- Toode on tellitav
1 tükk
€595,00
Kuumakse alates: 17,00 €
Lae alla:
Spetsifikatsioonid: EAW MKC60 specification sheet (.pdf)
Tehnilised andmed
Mudel: MKC60
Sagedusala: 70Hz-20kHz
Max SPL: 125dB
Töörežiim: Single-Amp (LF/HF, DSP w/ EAW Focusing & DynO)
Subsystem:
LF – 6,5″ Cone, 1.5″ võnkepool, Vented
HF – 1″ dome tweeter, coaxial
Nominaalne katvusnurk: 110° kooniline
Võimsus: 250W @ 8ohms
Pistikud ühendused: 1x Neutrik NL4, 2-pooluseline kruviklemm
Mõõdud: 324 x 208 x 206mm
Kaal: 4,9kg
EAW MKC 80
Bränd:
EAWKirjeldus:
- EAW MKC80 8"+1" installatsioonikõlar
- Võimekas, kompaktse disainiga kõlar
- Parendeeritud CSA koaksiaalne ruupor
- Integreeritud käepide ja statiivi ava
- 60Hz-20kHz
- 132dB
- 450W@8Ohm
- Saadaval ilmastikukindlana ja trafoga
- Sobib kasutamiseks EAW UXA4403 võimendiga
- 10kg
- Toode on tellitav
1 tükk
€890,00
Kuumakse alates: 26,00 €
Tehnilised andmed
Mudel: MKC80
Sagedusala: 60Hz-20kHz
Max SPL: 132dB
Töörežiim: LF/HF, DSP w/ EAW Focusing & DynO
Subsystem:
LF Transducer – 1x8in cone, 2-tolline võnkepool, Vented
HF Transducer – 1×1-in exit, 35mm voice coil compression driver, Concentric Summation Array (CSA) loaded
Nominaalne katvusnurk: 90° x 60°, pööratav ruupor
Võimsus: 450W @ 8ohms
Pistikühendused: 2x Neutrik NL4, 2-pooluseline riviklemm
Mõõdud: 422 x 255 x 267mm
Kaal: 10kg
Hoiutingimused
Spetsifikatsioonid: EAW MKC80 specification sheet (.pdf)
Behringer RX1602 V2
Bränd:
BehringerKirjeldus:
- Behringer RX1602 V2 paindlik ja mitmekülgne helimikser
- 16x balanseeritud liinisisendit mono või stereosignaalidele
- Iga kanali kohta eraldi balansi ja +4/-10 dB nivoo valitsad
- Taustvalgusega kahe funktsiooniga Mute valits igal sektsioonil koos Clip indikaatoriga
- Monitor/FX signaalid suunatavad kõrvaklapi väljundisse
- Kaks täpset 7-segmendilist LED nivooindikaatorit ja eraldi parema vasaku kanali nivoo reduleerimise võimalus
- 6,35mm pulk väljundid ning lihtsasti ligipääsetav kõrvaklapiväljund esipaneelil koos nivooregulaatoriga
- Kvaliteetsed pöördvalitsad
- Sisemine toiteplokk
- Toode on tellitav
1 tükk
€138,00
Hind tk kohta: 138,00 €
Lae alla:
Lühijuhend : Behringer RX1602 V2 lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 44 x 483 x 149 mm
Kaal : 1,8kg
Klark Teknik DM TCE-EU
Bränd:
Klark TeknikKirjeldus:
- Klark Teknik DM TCE-EU 2,3-tolline värvilise ekraaniga puutetundlik kontroller
- Programmeertiavad valitsad
- POE toitega
- Toetab DM seeria seadmete mitut lehekülge ning funktsiooni
- Üksiku EU paigaldutoosi suuruses
- Komplektis must ja valget värvi raam ning valitsa nupud
- Programmeeritav DM KONTROL tarkvara abil
- Toode on tellitav
1 tükk
€245,00
Hind tk kohta: 245,00 €
Lae alla:
Lühijuhend : Klark Teknik DM TCE-EU lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 86,36 x 86,36 x 53,75mm
Kaal : 0,16kg
Klark Teknik CP8000EU
Bränd:
Klark TeknikKirjeldus:
- Klark Teknik CP8000EU süvistatav seinakontroller DM8000 seeriale
- Nivoo valitsat on võimalik määrata sisendsignaalile või üldnivoo reguleerimiseks
- Valits võimaldab aktiveerida lisa sisendeid 1-6
- Kõik valitsad taustvalgusega
- Toide üle võrgu DM8000 protsessorist
- Maksimaalne Cat5/6 või 5-juhiga kaabli pikkus 100m
- Kompaktne disain võimaldab paigaldamist enamikesse standard paigaldustoosidesse/karbikutesse
- Piisavalt ruumi markeerimiseks
- Diskreetne välimus sobitub iga sisekujundusega
- Toode on tellitav
1 tükk
€56,00
Hind tk kohta: 56,00 €
Lae alla:
Lühijuhend : Klark Teknik CP8000EU lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 80 x 80 x 36mm
Kaal : 0,07kg
Midas Heritage-D HD96-24 IP
Midas Heritage-D HD96-24 IP
1 tükk
€29 500,00
1 tükk
€29 500,00
Midas Heritage-D HD96-24 IP
Bränd:
MidasKirjeldus:
- Midas Heritage-D HD96-IP 144-kanaliga digitaalne helipult 96kHz
- 120 samal ajateljel ja faasi-koherentset mix bus'i
- 21-tolline värviline TFT mahtuvuslik puuteekraan
- Multitouch kasutajaliides
- Auhinnatud Midas mikrofonieelvõimenid
- HyperMAC ja AES50 võrguühendused võimaldavad valida 576 sisendi ja 576 väljundi seast 96kHz saple rate juures
- Kaks digitaalse võrguprotokolli konverterit võimaldavad mõlemas suunas kuni 128 kanalit asünkroonse sample rate konversiooniga
- 24x VCA gruppi ja piiramatu arv POP gruppe
- Kuni 24 mitmekanaliga efektiprotsessorit (efect engine)
- Integreeritud Wifi moodul
- 32x lisaväljundi topelt ULTRANET mooduli abil
- 28x Midas PRO motoriseeritud heeblit
- Puutetundlikud valitsad
- 2x universaalset toiteplokki
- Sobivad stageboxid: DL251, DL231, DL153, DL151, DL152, DL154, DL155
- Installatsiooni versioon (ilma transpordikastita)
- Toode on tellitav
1 tükk
€29 500,00
Kuumakse alates: 835,00 €
Lae alla:
Lühijuhend : Midas Heritage-D HD-96 lühijuhend (.pdf)
Tehnilised andmed
Processing
Input processing channels: 144 flexi channels
Output processing channels: 96 flexi aux outputs, 24 matrices, stereo bus, mono bus
Internal effects engines:
24 x effects slots (up to 96 effects)
32 x Stereo multiband compressors
96 x Stereo dynamic equalisers
Point-to-point routing matrix: 622 x 652
Signal processing: 64-bit floating point
D/A converter: 24-bit, 96 kHz and 128 times oversampling
A/D converter: 24-bit, 96 kHz and 128 times oversampling
Sampling frequency: 96 kHz
I/O latency (surface input to output): 1.34 ms
Input audio processing:
Dual-slope high and low-pass filters
True phase filter control
4-band parametric EQ with 3 shelf modes
4-mode creative input compressors
Input gates or ducker
Insert point on/off with processing order change
Direct output with adjustable level and processing pick of point
Delay-compensated aux return mode on inputs
5 x tap-off points per send
Output audio processing:
Output 4-band parametric EQ with shelving/HP/LP options
4-mode creative output dynamics
Insert point on/off with processing order change
Direct input with adjustable level and processing tap-off point
Mixing control assistance:
12 x talk groups
12 x mute groups
24 x surface POPulation groups
24 x VCA associated population groups
Scene snapshot automation
Mõõdud : 1028 x 719 x 352 mm
Kaal : 43,2kg
Klark Teknik DF1000
Bränd:
Klark TeknikKirjeldus:
- Klark Teknik DF1000 2-kanaliga eelseadistud automaatne feedback elimineerija
- Lisab kuni 10dB süsteemi gain'i
- Tuvastab ja eemaldab koheselt akustilise tagasiside ("vile")
- Ülikiire ja täpne DSP valib ning lisab kuni 32 filtrit kanali kohta
- Töötab efektiivselt nii kõnele kui muusikale
- Kaks autonoomset kanalit stereo või kahe eraldi mono tsoonide protsessimiseks
- Väga kitsad filtrid (kuni 1/30 oktavi) aitavad säilitad signaali algset kõla
- Tagasiside eemaldamise ning filtrite lähtestamise valitsad esipaneelil
- Kaks balansseeritud/balansseerimata kombo pistikuga (XLR ja TRS) ning Euroblock tüüpi kruviklemmidega sisendit ja väljundit
- Universaalne toiteplokk
- Toode on tellitav
1 tükk
€205,00
Hind tk kohta: 205,00 €
Lae alla:
Lühijuhend : Klark Teknik DF1000 lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 483 x 296 x 50 mm
Kaal : 2,9kg
Klark Teknik DM8500
Bränd:
Klark TeknikKirjeldus:
- Klark Teknik DM8500 avatud arhitektuuriga digitaalne heliprotsessor
- 64 x 64 topelt avariikindlusega Dante/AES67 digitaalne audioliides
- 10x mikrofoni eelvõimendit/liini sisendit
- 6 elektrooniliselt balansseeritud liini väljundit
- 24x vabalt suunatavat Acoustic Echo Cancellation efekti
- 16x ULTRANET väljundit
- USB liides
- Ethernet liides
- Integreeritud veebiserver konfigureerimiseks
- Integreeritud meediakeskus heli salvestamiseks ja mahamängimiseks
- Labgruppen D-seeria ja Lucia võimendite tugi
- RS232 liides kolmandate osapoolte juhtsüsteemide jaoks
- 6 kasutaja-seadistatavat GPIO sisend/väljundühendust
- Universaalne toiteplokk
- Toode on tellitav
1 tükk
€2 574,00
Kuumakse alates: 73,00 €
Lae alla:
Lühijuhend : Klark Teknik DM8500 lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 483 x 293 x 44mm
Kaal : 3,6 kg
Lab gruppen FAD602
Bränd:
Lab gruppenKirjeldus:
- Labgruppen FAD602 2x60W installatsioonivõimendi
- Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
- Dante digitaalse audioprotokolli liides
- Energy Star energiasäästu sertifikaat
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Muutmiskindlad nivooregulaatorid tagaküljes
- 1U 19" seadmeräkki paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
- Toode on tellitav
1 tükk
€529,00
Kuumakse alates: 15,00 €
Lae alla:
Lühijuhend : Lab gruppen FAD602/FAD1202/FAD2402 lühijuhend (.pdf)
Tehnilised andmed
Maximum Output Power
4 or 8 Ω per channel: 60W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg
Lab gruppen FAD1202
Bränd:
Lab gruppenKirjeldus:
- Labgruppen FAD1202 2x120W installatsioonivõimendi
- Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
- Dante digitaalse audioprotokolli liides
- Energy Star energiasäästu sertifikaat
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Muutmiskindlad nivooregulaatorid tagaküljes
- 1U 19" seadmeräkki paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
- Toode on tellitav
1 tükk
€579,00
Kuumakse alates: 17,00 €
Lae alla:
Lühijuhend : Lab gruppen FAD602/FAD1202/FAD2402 lühijuhend (.pdf)
Tehnilised andmed
Maximum Output Power
4 or 8 Ω per channel: 120W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg
Lab gruppen FAD2402
Bränd:
Lab gruppenKirjeldus:
- Labgruppen FAD2402 2x240W installatsioonivõimendi
- Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
- Dante digitaalse audioprotokolli liides
- Energy Star energiasäästu sertifikaat
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Muutmiskindlad nivooregulaatorid tagaküljes
- 1U 19" seadmeräkki paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
- Toode on tellitav
1 tükk
€669,00
Kuumakse alates: 19,00 €
Lae alla:
Lühijuhend : Lab gruppen FAD602/FAD1202/FAD2402 lühijuhend (.pdf)
Tehnilised andmed
Maximum Output Power
4 or 8 Ω per channel: 240W
Mõõdud : 280 x 218 x 44mm
Kaal : 2,6kg
Lab gruppen CMA1201
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen CMA1201 120W installatsiooni mikservõimendi
- Töötab Low-Z (4/8 Ohm) and High-Z (70/100 V) režiimis koos lülitatava kõrgpääsufiltriga
- 4 mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
- Energiasäästlik disain
- Üldnivoo reguleerimise võimalus koos 2-ribalise ekvaliaiseriga esipaneelil
- Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Toitelüliti esipaneelil
- Lisa heliväljund teiste võimenditega ühendamiseks
- 1U 19" seadmeräkki paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Ventilaatorita, vaikne võimenditehnoloogia (konvektsioon-jahutus)
- Toode on tellitav
1 tükk
€344,00
Hind tk kohta: 344,00 €
Tehnilised andmed
Maximum Output Power
4 or 8 Ω per channel: 120 W
Number of Amplifier Channels
Number: 1
Minimun Load Impedance
4 Ω mode: 4 Ω
8 Ω mode: 8 Ω
70 V output mode: 41 Ω
100 V output mode: 82 Ω
Audio Outputs
Amplifier output: 2-pin Euroblock connector, stereo
Aux output: 3-pin Euroblock connector
Aux output max level: 4.88 V (16 dBu)
Audio Inputs
Mic/Line with priority/ ducking input: 1 x 5-pin Euroblock connector (channel A)
Mic/Line with summed RCA: 3 x 3-pin Euroblock connector, 3 x stereo RCA (channel B, C, D)
Impedance: Balanced mic/line: 20 kΩ Unbalanced line and RCA: 10 kΩ
Input sensitivity for max amplifier output or nominal (+4 dBu) aux output level:
Mic: 0.038 V (-26 dBu)
Balanced: 1.23 V (+4 dBu)
RCA: 0.62 V (-2 dBu) each for mono sum RCA
Maximum input level: 4.88 V (+16 dBu)
Microphone phantom power: 48 V
Controls
Front: Power standby button, input and output gain control, tone controls - bass and treble
Rear: Load config - (4 Ω / 8 Ω / 70 V / 100 V), switchable 80 Hz high-pass filter, mic/line switch, vox/ducking threshold control, phantom power, input routing (2-channel models only)
Tone Controls
Bass: ±10 dB @ 100 Hz
Treble: ±10 dB @ 10 kHz
Indicators
Power: On (blue), force standby (red), standby (yellow
Inputs:
Signal (green LED): >12.3 mV (-36 dBu)
Fault (red LED): Clip
Master:
Signal (green LED): >-50 dBu
Fault (red LED): Overheat, DC fault, over current, etc
Limit (red LED): Output limit
System
Output circuit type: Class D
Remote connector: 1 x RJ45 Ethernet connector
Performance
Distortion, 1/8 rated power: <0.05%
Frequency response: 20 Hz to 20 kHz, +0.5 / -1 dB
Crosstalk (2 channel models): >70 dB
Signal-to-noise: >97 dBA
High-pass filter: 80 Hz HPF
Circuit Protection
Cooling: Convection-cooled, fanless
Amplifier protection: Thermal protection, over current protection, DC protection, high frequency protection
Load protection: Controlled start and shutdown behaviour, DC-fault protection
Power Supply, Voltage (Fuse)
Main voltage: 100-240 V~, 50/60 Hz
Fuse: T 3.15 A L 250 V
Power consumption 1/8th rated power@ 4 Ω: 50 W
Mains connector:Standard IEC connector
Dimensions / Weight
Dimensions (H x W x D): 44 x 218 x 299 mm
Weight: 2.4 kg
Finish: Brushed black anodized aluminum chassis with black painted steel bottom
Approvals: CE, CCC, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B
Lab gruppen CM82
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen CM82 8sisse /2 välja installatsioonimikser
- 8x mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
- Üldnivoo regulaator esipaneelil 2-ribalise ekvalaiseriga
- Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Toitelüliti esipaneelil
- Lisa heliväljund võimenditega ühendamiseks
- 1U 19" seadmeräkki paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Toode on tellitav
1 tükk
€344,00
Hind tk kohta: 344,00 €
Lae alla:
Lühijuhend : Labgruppen CM41/82 lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 437 x 248 x 44mm
Kaal : 2,4kg
Lab gruppen CM41
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen CM41 4sisse /1 välja installatsioonimikser
- 4x mikrofoni/liini sisendit eraldi nivoo reguleerimise võimalusega
- Üldnivoo regulaator esipaneelil 2-ribalise ekvalaiseriga
- Sisendite prioriteetide konfigureerimise võimalus taustamuusika vaigistamiseks
- Kaugjuhitav nivoo reguleerimise võimaluse üle andmesidekaabli (RJ-45 pesa)
- Toitelüliti esipaneelil
- Lisa heliväljund võimenditega ühendamiseks
- 1U 19" seadmeräkki, lauale või seinale paigaldatav
- Euroblock tüüpi sisend- ja väljundpistikud
- Toode on tellitav
1 tükk
€272,00
Hind tk kohta: 272,00 €
Lae alla:
Lühijuhend : Labgruppen CM41/82 lühijuhend (.pdf)
Tehnilised andmed
Dimensions : 299 x 218 x 44mm
Weight : 2,1kg
Lab gruppen E 12:2
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 12:2 1,200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 600 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€1 479,00
Kuumakse alates: 42,00 €
Lae alla:
Tooteinfo : Labgruppen E 12:2 tooteinfo (.pdf)
Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)
Tehnilised andmed
Max. Output Power (all ch.’s driven)
2 ohms 600 W
4 ohms 600 W
8 ohms 600 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 300 W)
16 ohms 310 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 150 W)
70 V 600 W
100 V Can deliver 600 W to a 100 V load tapped at 1200 W
Lab gruppen E 40:4
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 40:4 4,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- 4 x 900 Watts into 2 Ohms, 4 x 1,000 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,000 Watts into Hi-Z 70 V,
4 x 1,000 Watts into Hi-Z 100 V - Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€2 790,00
Kuumakse alates: 79,00 €
Lae alla:
Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)
Tehnilised andmed
Max. Output Power (all ch.’s driven)
2 ohms 900W
4 ohms 1000 W*
8 ohms 1000 W*
16 ohms 625 W*
70 V 1000 W*
100 V 1000 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*See spec sheet for details
Lab gruppen E 20:4
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 20:4 2,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 500 W on any channel for all loads(low impedance 2, 4, 8 or 16 Ohms or Hi-Z 70 V or 100 V)
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€2 649,00
Kuumakse alates: 75,00 €
Lae alla:
Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)
Tehnilised andmed
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 500 W*
8 ohms 500 W*
16 ohms 500 W*
70 V 500 W*
100 V 500 W*
Dimension : 483 x 417 x 44 mm
Weight : 7,9kg
*Vaata spetsifikatsioonilehte
Lab gruppen E 10:4
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 10:4 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€2 090,00
Kuumakse alates: 60,00 €
Lae alla:
Lühijuhend : Lab gruppen E-series lühijuhend (.pdf)
Tehnilised andmed
Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms N.R.
4 ohms 250 W*
8 ohms 250 W*
16 ohms 125 W*
70 V 250 W*
100 V 250 W*
Dimension : 483 x 417 x 44 mm
Weight : 6,7kg
*Vaata spetsifikatsioonilehte
Lab gruppen E 5:4
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 5:4 500 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 4 x 125 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fans with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€1 890,00
Kuumakse alates: 54,00 €
Lae alla:
Tooteinfo : Labgruppen E 5:4 tooteinfo (.pdf)
Lühijuhend : Lab gruppen E-seeria lühijuhend (.pdf)
Tehnilised andmed
Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms N.R.
4 ohms 125 W
8 ohms 125 W
16 ohms 125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)
70 V 125 W
100 V Can deliver 125 W to a 100 V load tapped at 250 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 6,4kg
Lab gruppen E 2:2
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E2:2 200 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 100 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€899,00
Kuumakse alates: 26,00 €
Lae alla:
Tooteinfo : Labgruppen E 2:2 tooteinfo (.pdf)
Lühijuhend : Lab gruppen E-seeria lühijuhend (.pdf)
Tehnilised andmed
Max. Output Power (all ch.’s driven)
2 ohms N.R.
4 ohms 100 W
8 ohms 100 W
16 ohms 100 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 100 W
100 V Can deliver 100 W to a 100 V load tapped at 200 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg
Lab gruppen E 8:2
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E 8:2 800 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 400 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€1 379,00
Kuumakse alates: 40,00 €
Lae alla:
Tooteinfo : Labgruppen E 8:2 tooteinfo (.pdf)
Lühijuhend : Lab gruppen E-seeria lühijuhend (.pdf)
Tehnilised andmed
Max. Output Power (all ch.’s driven)
2 ohms 400 W
4 ohms 400 W
8 ohms 400 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 400 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 100 W)
70 V 400 W
100 V Can deliver 200 W to a 100 V load tapped at 800 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg
Lab gruppen E 4:2
Bränd:
Lab gruppenKirjeldus:
- Lab gruppen E4:2 400 W amplifier carrying 2 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost
- Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
- Flexible IntelliDrive permits delivering the 2 x 200 W at constant voltage 70 V or low impedance (2, 4 and 8 Ohms) on any channel
- Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization
- High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems
- IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance
- Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions
- Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles
- Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads
- Built in 50 Hz high pass filter selectable per channel available on rear panel switch
- Per-channel attenuation knob and signal LED on rear panel for simple commissioning
- Efficient cooling with temperature-controlled fan with front to back airflow
- Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs
- GPIO connector with power control and indication for further system integration
- Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals
- Toode on tellitav
1 tükk
€1 090,00
Kuumakse alates: 31,00 €
Lae alla:
Tooteinfo : Labgruppen E 4:2 tooteinfo (.pdf)
Lühijuhend : Lab gruppen E-seeria lühijuhend (.pdf)
Tehnilised andmed
Max. Väljundvõimsus (kõik kanalid koormatud)
2 ohms 200 W
4 ohms 200 W
8 ohms 200 W (requires the “70 V” mode for the RSL. “Lo-Z” gives 100 W)
16 ohms 200 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 50 W)
70 V 200 W
100 V Can deliver 200 W to a 100 V load tapped at 400 W
Mõõdud : 483 x 276 x 44 mm
Kaal : 4,2kg
Behringer RX1202FX
Bränd:
BehringerKirjeldus:
- Behringer RX1202FX analoog 3U rack mixer
- 8x tippklassi XENYX mikrofoni eelvõimendit
- "British" 2-ribaline sooja kõlaga ekvalaiser
- Efektiprotsessor koos 100 suurepärase eelseadisusega
- Lülitatav +48V phantom toide kondensaatormikrofonidele
- 4x balanseeritud liinisisendit
- CD/Tape sisend võimalik suunata otse põhi- või lisaväljundisse/kõrvaklappidesse
- 2 Aux liini iga kanali kohta (1 pre fader monitoridele, 1 post fader efektidele)
- Eraldi Control Room, kõrvaklapi ja DC/Tape väljundid
- Balanseeritud Main väljund kullatud XLR pistikutega
- Vastupidavad 60-mm käiguga heeblid ja tihendiga pöördvalitsad
- Universaalne toiteplokk 100-240V
- Toode on tellitav
1 tükk
€210,00
Hind tk kohta: 210,00 €
Lae alla:
Tooteinfo : Behringer RX1202FX tooteinfo (.pdf)
Kasutusjuhend : Behringer RX1202FX kasutusjuhend (.pdf)
Tehnilised andmed
Mõõdud : 482 x 133 x 150 mm
Kaal : 3,04kg
Behringer CE500D
Bränd:
BehringerKirjeldus:
- Behringer CE500D multifunktsionaalne 100W aktiivkõlar
- Sobib restoranidesse, kauplustesse, näitustele, multimeedia ja koduaudio lahendustesse
- Suurepärane helikvaliteet, suure dünaamikaga lineaarse sageduskarakteristikuga
- Revolutsiooniline Class-D võimenditehnoloogia: suur võimsus ja uskumatu helikvaliteet
- Suure võimsusega 5,5-tolline madalsagedusvaljuhääldi ja ½" tweeter
- Madala müratasemega mic/line sisend koos nivoo reguleerimise võimaluse ning ülekoormus LED'iga
- Lisa liiniväljund võimaldab signaali edastada järgmistesse kõlaritesse
- Integreeritud kõlari kaitsefunktsiooniga limiter
- Paindlik ja vastupidav seinakinnitus
- Universaalne toiteplokk 100-240V
- Toode on tellitav
1 tükk
€149,00
Hind tk kohta: 149,00 €
Lae alla:
Tooteinfo : Behringer CE500D tooteinfo (.pdf)
Lühijuhend : Behringer CE500D lühijuhend (.pdf)
Tehnilised andmed
Mõõdud : 320 x 196 x 195mm
Kaal : 4,0kg
K&M 24110
Bränd:
K&MKirjeldus:
- K&M 24110 muudetava positsiooniga kõlarikinnitus
- Asend: muudetav, 11 positsiooni
- Maksimaalne koormus: 50kg
- Kinnitusviis: seinakinnitus
- Värv: must
- Kõlari kinnituspunkti kaugus seinast: 420mm
- Kaal: 2,63kg
- Toode on tellitav
1 tükk
€74,00
Hind tk kohta: 74,00 €
Tehnilised andmed
Asend: muudetav, 11 positsiooni
Vertikaalne nurk: 0° to 22°
Materjal: teras
Maksimaalne koormus: 50kg
Kinnitusviis: seinakinnitus
Värv: must
Kõlari kinnituspunkti kaugus seinast: 420mm
Kaal: 2,63kg



