Brand:

Description:

• Standard speaker stand
• Tube diameter ø35-37mm
• Load capacity up to 50 kg
• Lenght adjustable from 1,370 to 2,170 mm
• Spring loaded bolt and locking screw
• Black
• Product is on order

Brand:

Description:

• Pull-Link AS1 Pneumatic riveting tool
• Capacity Blind rivets Ø2.4 – 3.0/3.2 – 4.0 – 4.8/5.0 mm up to stainless steel material
• Traction power: 7.300 N (6 bar)
• Pressure required: 5 – 7 Bar (regulated filtered air)
• Product is on order

Brand:

Description:

• Adam Hall 87471 19" 1U Mains Power Strip with 8 Sockets
• Illuminated 2-pole switch on the front panel
• 8 mains outlets on the rear panel
• Black aluminium housing
• 54 mm deep
• 19 "angle can be mounted in four positions
• Product is in stock

Brand:

Description:

• Behringer DI800V2 8-channel di-box
• Professional and multi-purpose 8-channel direct injection box for stage and studio applications
• Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers
• Ultra-flat frequency response due to servo-balanced operation
• Optional mains or phantom-powered operation
• Allows direct connection to speaker outputs with up to 3,000 Watts
• +20 dB gain switch for pre-amplification of low-level signals
• Switchable input attenuation allows input levels of up to +40 dB
• Ground Lift switch eliminates typical ground loop problems
• Link output for easy connection to further equipment
• 1/4" TRS and gold-plated XLR connectors
• Illuminated switches enable perfect operation in dark stage environments
• Product is in stock

Description:

• Castor pallet for sliding door racks
• 4x 100m wheels (2x brake)
• Made of plywood
• Coated with stuctural paint
• Product is on order

Description:

• 2U stackable  with sliding doors
• 4x Neutrik D-series cutouts on the front and rear
• Adjustable rack front and rear rack rails
• Made from plastic coated 7mm plywood
• 4x rubber feet
• Includes screw set (12pcs)
• Product is on order

Description:

• 3U stackable  with sliding doors
• 4x Neutrik D-series cutouts on the front and rear
• Adjustable rack front and rear rack rails
• Made from plastic coated 7mm plywood
• 4x rubber feet
• 2x flip handles
• Includes screw set (12pcs)
• Product is on order

Description:

• 4U stackable  with sliding doors
• 4x Neutrik D-series cutouts on the front and rear
• Made from plastic coated 7mm plywood
• Adjustable rack front and rear rack rails
• 4x rubber feet
• 2x flip handles
• Includes screw set (12pcs)
• Product is on order

Brand:

Description:

• Hamilton KB301F Three Section Musical Stand
• Metal fittings with metal-to-metal threads
• European style rectangular desk with wire music retainers
• Tripod base folds for convenient transport and storage
• KB301F with Black powder coated finish
• Product is in stock

Brand:

Description:

• K&M 21338 Distance rod with hand crank
• Solid steel tubing to connect satellite systems.
• Height-adjustment by hand crank.
• Extra safety features provided by additional push-button and locking screw to avoid uncontrolled reverse motion
• Product is on order

Brand:

Description:

• Behringer GB3002-E Heavy-duty guitar stand to secure your precious stringed instrument
• Suitable for electric guitar
• Stable compact-size design and durable metal tube construction
• Shock-absorbing rubber foam to protect your instrument from dings and scratches
• Foldable and light weight for easy transportation and storage
• Product is in stock

Brand:

Description:

• Behringer GB3002-A Heavy-duty guitar stand to secure your precious stringed instrument
• Suitable for acoustic guitar
• Stable compact-size design and durable metal tube construction
• Shock-absorbing rubber foam to protect your instrument from dings and scratches
• Foldable and light weight for easy transportation and storage
• Product is in stock

Brand:

Description:

• Behringer SM5001 Universal triangular base stand for studio near field monitors and wide range of loudspeakers
• Perfect for recording studios and listening environments
• Large 10" x 10" (25 cm x 25 cm) sturdy metal platform with soft rubberized padding reduces vibration
• Precise height adjustment in 5 steps from 3 ft (0.93 m) up to 3.8 ft (1.15 m) of elevation
• Heavy-duty steel construction for maximum weight capacity of 55 lbs (45 kg)
• Floor triangular base length of 1.5 ft (45 cm) per side
• Product is in stock

Brand:

Description:

• Behringer SM2001 Universal stand for studio near-field monitors and wide range of loudspeakers
• Perfect for recording studios and listening environments
• Large 9.5" x 9.5" (23 cm x 23 cm) metal platform with soft rubberized padding reduces vibration
• Precise height adjustment in 5 steps from 12" (30 cm) up to 20" (51 cm) of elevation
• Heavy-duty steel construction for maximum weight capacity of 18 lbs (15 kg)
• Floor base length of 9.5" (24 cm) per side
  
  
• Product is in stock

Brand:

Description:

• Behringer MU1000 Heavy-duty collapsible tripod music stand
• Perfect for live performances, studios, events, gatherings, speech and presentations
• Triple-reinforced legs for rock-solid tripod stability
• Precise height adjustment from 2 ft (64 cm) up to 3.8 ft (119 cm)
• Sheet music holder is 19" W x 13" D x 1.7" H (48 cm x 33 cm x 4.5 cm)
• Perforated music sheet desk is not removable
• Foldable and lightweight stand for easy transport and storage
  
  
• Product is on order

Brand:

Description:

• Behringer FLow8 clamp
• Tilt angle 0°, 15°, 30°
• Attaches to standard mic stands
• Quick and easy mounting design
• Product is on order

Brand:

Description:

• Screw-on wall mount with innovative, patented straddlingbearing-anchors.
• Suitable for speakers with connectordiameter of 35/37 mm.
• This mount provides simpleattachment and guaranteed effective clamping of speaker
• Product is in stock

Description:

• 1U dual 30.5 cm gooseneck COB LED rack light
• Dimmer controller
• Level memory
• For front and rear illumination
• Includes power adapter
• Product is in stock

Description:

• 1U dual 30.5 cm gooseneck COB LED rack light
• Red, green or blue colours plus cold or warm white
• Colour selection memory
• For front and rear illumination
• Includes power adapter
• Product is on order

Description:

• Stable and visually striking construction
• Built-in, height-adjustable pump dispenser
• 'Sanitise hands' sticker included
• Available in different colours
• Warning: not a certified medical product
• Product is on order

Description:

• Universal disinfectant stand & holder with clamp (perfect for 500ml pump bottles)
• Height adjustable up to max. 160cm
• Sturdy, durable design and exceptionally stable base
• Practical mounting slots on the back for direct wall fixing and attachment of anti-theft ropes or similar
• Maximum hygiene through easy cleaning of the removable drip tray
• Lower mounting on microphone stand via 5/8" thread including reduction adapter to 3/8"
• Dimensions bottle holder: inside width 100 mm, inside depth flexibly adjustable from 62- 96 mm
• Holder compatible with SCP710 Super Clamp for fixing to trusses; scaffolding and railings
• Product is in stock

Description:

•   Enable a comfortable and at the same time hygienic removal of products from original containers
• Product is on order

Description:

• Enable a comfortable and at the same time hygienic removal of products from original containers
• Product is in stock

Brand:

Description:

• The hand sanitiser is a rapid and comprehensively effective, ready-to-use, alcohol-based disinfectant that is free from perfumes and colourings, and which is suitable for use on skin as a disinfecting hygiene agent for people
• Meditrade Ethasept® hand sanitiser is used for hygienic and surgical hand disinfection for all areas for hygiene of the body
• Application method and duration:
  Ready to use: keep hands/underarms moist during application. Observe standard procedures for hygienic (EN 1500) and surgical (EN 12791) hand disinfection
• Heavily soiled hands should be cleaned with soap and water before application. Allow wet hands to dry before application.
• Product is on order

Brand:

Description:

• The hand sanitiser is a rapid and comprehensively effective, ready-to-use, alcohol-based disinfectant that is free from perfumes and colourings, and which is suitable for use on skin as a disinfecting hygiene agent for people
• Meditrade Ethasept® hand sanitiser is used for hygienic and surgical hand disinfection for all areas for hygiene of the body
• Application method and duration:
  Ready to use: keep hands/underarms moist during application. Observe standard procedures for hygienic (EN 1500) and surgical (EN 12791) hand disinfection
• Heavily soiled hands should be cleaned with soap and water before application. Allow wet hands to dry before application.
• Product is in stock

Brand:

Description:

• Lightweight adjustable steel distance pole
• Mounts mid-high loudspeaker above a subwoofer
• Adjustable height from 3' 3" to 5' 3" (1.0 m to 1.6 m)
• Connects to 1 3/8" (35 mm) pole sockets at both ends
• Friction screw and locking pin for stable height adjustment
• Hard wearing semi matt black finish
• Product is in stock

Brand:

Description:

• Lightweight adjustable steel speaker stand
• Mounts a loudspeaker at a height of 1.35 m to 2.15 m
• Connects to 35 mm pole mount socket
• Friction screw and locking pin for stable height adjustment
• Hard wearing semi matt black finish
• Product is on order

Brand:

Description:

• This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station
• The 6 m long internally guided microphone cable has a 3 pin XLR plug connector
• Microphones to max. 1.5 kg are easily held in any position
• The clamping width of 0 to 48 mm allows the clamp to be attached to a wide variety of surfaces
• The stable metal construction with high quality plastic inserts guarantees secure and strong hold
• The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes
• The microphone arm can also be fixed with the table flange 23855 available as an optional extra
• Product is in stock

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 500 to 700mm
• Color black
• Product is on order

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 900 to 1450mm
• Color black
• Product is on order