Brand:

Description:

• Current rating 40 A rms continuous
• Up to 50 A audio signal, duty cycle 50%
• Easy to assemble
• High impact materials - long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• Improved grip on latch
• 1 piece strain relief, chuck for 6 to 14.5 mm cable O.D.
• Color coding possible
• Improved screw-type termination for highest pull-out force
• Integrated design guarantees "Made by Neutrik®"
• Product is in stock

Brand:

Description:

• Current rating 40 A rms continuous
• Up to 50 A audio signal, duty cycle 50%
• Only 3 parts, easy to assemble
• High impact materials - long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• Improved grip on latch
• 1 piece strain relief, chuck for 7 to 14.5 mm cable O.D.
• Color coding possible
• Improved screw-type termination for highest pull-out force
• Integrated design guarantees "Made by Neutrik®"
• Product is on order

Brand:

Description:

• Robust "D" metal shell
• Standardized D sized 24 mm panel cutout
• Solder cups on 3 - 7 pole version
• Product is in stock

Brand:

Description:

Brand:

Description:

• Unique cage design of female contact for low contact resistance and high integrity
• Female contact incorporates a solder barrier to prevent solder running into the contact mating area
• Female connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy
• Rugged zinc diecast shell, longlasting and dependable
• Internal thread on shell is well protected against any damage
• Branded with unique hologram - guarantees genuine and authentic Neutrik product
• Product is in stock

Brand:

Description:

• Neutrik NC3MXX X type xlr connector
• Solder contacts
• Male connector with improved locking recess without "window", more stringent housing increases durability
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Colored rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handyRugged zinc diecast shell, longlasting and dependableInternal thread on shell is well protected against any damageBranded with unique hologram - guarantees genuine and authentic Neutrik product
• Product is in stock

Brand:

Description:

• Cable strap 50cm
• Width 25mm
• Color black
• Text in red
• Heat treated for extra strength
• Product is in stock

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 500 to 700mm
• Color black
• Product is on order

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 900 to 1450mm
• Color black
• Product is on order

Brand:

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 425 to 645mm
• Boom arm length from 435 to 745
• Material steel
• Color black
• Product is in stock

Brand:

Description:

• Microphone stand with telescopic boom
• Die cast base
• Height 280mm
• Boom arm length from 425 to 725
• Material steel
• Color black
• Product is in stock

Brand:

Description:

• Microphone stand with telescopic boom
• Die cast base
• Adjustabele height from 900 to 1605mm
• Boom arm length from 435 to 745
• Material steel
• Color black
• Product is in stock

Description:

• 10A, 250V
• can be retrofitted
• screw terminals
• for 3x 1.5mm²
• Product is in stock

Description:

• 19" flight case
• Height 3U
• 2x handles
• Removable front and rear lid
• Product is on order

Brand:

Description:

• Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode
• Accepts all standard connectors: XLR, Speakon*, TRS (1/4", 1/8"), RCA, RJ45, MIDI and USB
• Super-easy operation with intuitive LED display
• Continuity check and intermittent contact detection
• Phantom-power and ground-shield check
• Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV
• Operates with 2 AA size batteries (not included)
• Product is in stock

Brand:

Description:

• Midas M32R Live flight case
• 6mm plywood
• 2x handles
• 4x butterfly latch
• Product is on order

Brand:

Description:

• LED lamp with 18" gooseneck shaft
• Rotatable right-angled 4 pin male XLR connector
• 5 Watt power consumption @ 12 Volts DC
• Warm white LED illumination for long term viewing comfort
• Compatible with Littlite* 18XR-4-LED lamp
• Product is in stock

Brand:

Description:

• Shielded cable for Midas and Behringer digital consoles
• Length 30m
• Cat5e etherCON RJ45 on both ends
• Product is in stock

Brand:

Description:

• Shielded cable for Midas and Behringer digital consoles
• Length 15m
• Cat5e etherCON RJ45 on both ends
• Product is in stock

Brand:

Description:

• Shielded cable for Midas and Behringer digital consoles
• Length 0,5m
• Cat5e etherCON RJ45 on both ends
• Product is in stock

Brand:

Description:

Brand:

Description:

Brand:

Description:

Brand:

Description:

Brand:

Description:

• Klotz stagebox 12/0
• Length 15m
• Aluminum housing has non-slip rubber feet and laser-engraved labelling
• Hand-soldered contacts
• Made in Germany
• Product is on order

Brand:

Description:

• Klotz stagebox 8/0
• Length 15m
• Aluminum housing has non-slip rubber feet and laser-engraved labelling
• Hand-soldered contacts
• Made in Germany
• Product is on order

Brand:

Description:

• Double shielded Cat5e cable on drum
• Length - 75m
• Suitable for Midas (M32) and Behringer (X32, Wing) digital consoles
• Neutrik Ethercon connectors
• Product is on order

Brand:

Description:

• Mounting bracket for Midas DP48 Personal Monitoring Mixer
• Attaches to standard mic, music or drum stands
• Dual headphone hangers and integrated cable guide
• Product is on order

Brand:

Description:

• Original ultra-rugged and highly flexible Neutrik etherFLEX* Cat5e cable
• Length 50 metres
• Tested for both AES50 and EtherSound* audio networking
• Dual shielding for protection against EMI and ESD interference
• Dual jacket construction with PUR and FRNC layers for enhanced cable resilience
• Shielded Hirose* RJ45 protected by Neutrik etherCON* connectors on both ends
• Robust and lightweight Schill* cable drum, with auxiliary winder and integrated break
• Extend two 50 m cables to 100 m using optional Neutrik NE8FF connector (not included)
• Rubber caps on etherCON connectors cover terminals during setup and transport
• Velcro* straps secure cable ends during transportation
• Designed and engineered in the U.K.
• Product is on order

Brand:

Description:

• Extends two independent AES50 connections by up to 100 m with CAT5 cable
• High channel capacity - 48 channels @ 96 kHz or 96 channels @ 48 kHz bidirectional operation
• Supports dual-redundant AES50 networks (X and Y connections)
• Rugged locking Neutrik* etherCON connectors used for AES50 connections
• Status indicator LEDs on front panel for each AES50 port
• Dual-redundant power supply inputs with locking Switchcraft* connectors
• External auto-ranging universal switch-mode power supply adapter
• Aluminium extrusion casing with stackable protective silicone rubber sleeve
• Compact and rugged design
• Product availability: Special order